NIU KQi 100P/100F Electric Scooter User Manual

Welcome

Thank you for choosing the NIU electric scooter. This vehicle offers a comfortable ride and robust performance, featuring a front spring shock absorption system, 9.5-inch pneumatic tires, and a 300W hub motor.

Safety and Requirements

Before riding, please ensure you meet the following requirements:

• Age: 14-60 years
• Height: 120-200 cm (47-79 inches)
• Maximum Load: ≤120 kg (265 lbs)

Required Gear: A helmet, elbow pads, and knee pads are mandatory when riding to minimize the risk of injury.

What's in the Box

Your NIU electric scooter package includes:

• Battery Charger
• Hexagon Wrench (KQi 100P models only)
• M5 Screw x7 *1 Spare (KQi 100P models only)
• Extended Nozzle Adapter

Assembly

Step 1: Secure Folding Mechanism

Ensure the folding mechanism is securely fastened. Take care to prevent wire pinching.

Step 2: Install Handlebar

Insert the handlebar into the stem, making sure that the headlight is facing forward.

Step 3: Attach Handlebars (KQi 100P)

For KQi 100P models, install the six M5 screws using the hexagon wrench, tightening them to 4-5 N-m.

Step 4: Activate Battery

Open the charging port cover, connect the scooter to a power outlet using the provided power supply, and activate the battery.

Step 5: Unfold Handlebars (KQi 100F)

For KQi 100F models, unfold both the right and left handlebars, allowing the limit stop collars to snap back into place.

Activation

Your new scooter is speed-limited to 15 km/h (9.3 mph) by default until activated. To remove this speed restriction, you can either activate the NIU App or ride the scooter for 200 meters (approx. 1/8 mile).

To activate via the NIU App:

1. Download the NIU app from your app store.
2. Register or log in to your NIU account.
3. Click on your scooter icon within the app.
4. Follow the in-app instructions to pair the scooter. This typically involves clicking "Device Binding" and finding your scooter.
5. Once paired, the scooter will be activated.

Powering On and Off

To Power On: Press the power button. The Bluetooth indicator ? on the display will start flashing.

To Power Off: Press and hold the power button.

Riding Instructions

Pre-Ride Check

Before each ride, check the battery level, tire pressure, and ensure the folding mechanism is securely locked.

Starting to Ride

Turn on the scooter. Place one foot on the deck and use the other foot to propel yourself forward to begin gliding.

Acceleration

Maintain a stable stance with both feet on the deck. Twist the throttle to accelerate. Note: The motor will only engage once the gliding speed reaches 4 km/h (2.5 mph).

Braking

Decelerate by releasing the throttle and engaging the brakes.

Turning

To turn, shift your body weight and gently steer the handlebars. Be mindful of road conditions and ensure you leave enough space for turning.

Riding Safety

Exercise caution ⚠️ when braking abruptly, as there is a risk of serious danger or injury. It is important to maintain a moderate speed and watch out for potential hazards.

Charging

Follow these steps to charge your scooter:

1. Open the charging port cover.
2. Insert the charging plug and connect it to a power socket.
3. The indicator on the charger will switch from red (charging) to green (fully charged) when complete.
4. Close the charging port cover once charging is complete.

Important Charging Warnings: ❗

• Do not charge when the charging port, charger, or power socket is wet.
• Only use the original charger provided by NIU for charging. Do not use any other type of chargers.
• Do not charge or continue using the battery if it is damaged or flooded.
• Close the charging port cover when not charging.
• Do not charge outdoors.
• Do not ride while charging.

Folding and Carrying

Stem Folding

Lift the safety latch and open the folding lever. Then, pull the stem to fold. Align the hook and the fender buckle, then push down to lock.

Stem Unfolding

Push the rear buckle to unlock and unfold the stem.

Handlebar Folding (KQi 100F only)

Simultaneously pull both limit stop collars, then fold the handlebar down. Close the folding lever.

Handlebar Unfolding (KQi 100F only)

Unfold both the right and left handlebars, allowing the limit stop collars to snap back into place.

Carrying the Scooter

After folding, hold the handlebar stem with either one hand or both hands to carry.

Parking Instructions

After riding the scooter, unfold the kickstand to park it. Before riding, ensure the kickstand is folded away.

NIU App Features

The NIU app provides access to various features and controls for your scooter. Key features include:

• Firmware Upgrade
• Charging Limit settings
• Lock and Unlock functionality
• Riding Record history
• Custom Speed settings
• Energy Recovery adjustments
• Acceleration Mode selection

For a complete list of features and detailed information, please refer to the NIU app.

Important Warnings

Please adhere to the following safety warnings to ensure a safe riding experience:

• No Passengers: Do not carry any passengers, including children. The scooter is designed for single-rider use only.
• Follow Regulations: Always follow local traffic regulations. Do not ride on highways or sidewalks where prohibited.
• Speed Control: Do not accelerate downhill.
• Water Hazard: Do not ride in water deeper than 2 cm (approx. 1 inch).
• Rain Riding: Please avoid riding in the rain. Braking distance is significantly increased in wet weather. Ride with extreme caution if riding in damp conditions.
• Riding Posture: Always keep both hands on the handlebar when riding. Do not ride with only one hand or one foot. Do not place your feet on the rear fender.
• Obstacles: Do not ride on stairs or attempt to jump over obstacles.
• Surface Conditions: When encountering uneven road surfaces or speed bumps, reduce speed and avoid high-speed passes.
• Indoor Riding: Do not ride indoors.