NIU KQi 100P / KQi 100F Product Manual

Contents

• Parts Info
• Handlebar Functions
• Dashboard Info
• Ambient Light Functions
• Specifications
• Troubleshooting
• Certifications

Parts Info

Due to product model and version differences, the pictures shown may differ from the actual product.

Throttle: Controls the speed of the scooter.

Headlight: Provides illumination for riding in low-light conditions.

Dashboard: Displays speed, battery level, riding mode, and other indicators.

Limit Stop Collar (KQi 100F only): A component specific to the KQi 100F model.

Mechanical Bell: Used to alert pedestrians and other road users.

Turn Signal: Indicates the intended direction of travel.

Front Reflector: Enhances visibility from the front.

Side Reflector: Enhances visibility from the sides.

Brake Lever: Engages the braking system.

Folding Lever: Allows the scooter to be folded for portability.

Charging Port: Connection point for the charger.

Drum Brake: The primary braking mechanism.

Folding Buckle: Secures the scooter in its folded state.

Suspension: Provides a smoother ride by absorbing shocks.

Rear Hub Motor: Powers the scooter.

Battery Compartment: Houses the scooter's battery.

Kickstand: Allows the scooter to stand upright when not in use.

Handlebar Functions

A Power Button: Press to turn on/off; press and hold to turn off.

B Left Turn Signal Button: Press to activate the left turn signal.

C Right Turn Signal Button: Press to activate the right turn signal.

D Throttle: Controls acceleration.

Button Functions:

• Power Button:
• Power on / off: Press the Power Button to turn on the scooter. Press and hold to turn it off.
• Mode switch: Short press *1 for mode switch.
• Turn on/off the headlight: Short press *2 to turn on/off the headlight.
• Speed unit switch: Short press *3 for speed unit switch.
• Switch to pedestrian mode: Short press *5 to switch to pedestrian mode.
• Turn Signal Button:
• Turn on/off the turn signal: Press the left/right button to activate the turn signal.
• Turn on the hazard light: Short press the left/right turn signal button twice to turn on/off the hazard light.

Dashboard Info

The dashboard displays various information:

• 1 Headlight: Indicates the headlight status.
• 2 Warning: Alerts the user to potential errors or issues.
• 3 Speedometer: Shows the current speed in km/h or mph.
• 4 E-Save Mode: Eco-friendly mode with a speed limit of 15 km/h (9.3 mph).
• 5 Dynamic Mode: Allows customization of speed range and acceleration via the app.
• 6 Pedestrian Mode: Low-speed mode with a limit of 6 km/h (3.7 mph).
• 7 Bluetooth: Indicates connection status with the NIU app.
• 8 Turn Signal Indicator: Shows when turn signals are active.
• 9 Sport Mode: Performance mode with a speed limit of 20 km/h (12.4 mph).
• 10 Battery Indicator: Displays the remaining battery charge.

Ambient Light Functions

This section is not detailed in the provided pages, but typically refers to customizable lighting features on the scooter.

Specifications

KQi 100P / KQi 100F

[1] Average battery life: Tested with a 75 kg (165 lbs) rider at a constant speed of 15 km/h (9.3 mph) on a flat road at 25°C (77°F) with a full battery. Factors affecting battery life include speed, number of startups/stops, kinetic energy recovery settings, rider weight, and ambient temperature.

[2] Maximum Slope: The maximum gradient a 75 kg (165 lbs) rider can ascend at a constant speed of 8 km/h (5 mph) at 25°C (77°F) with a full battery.

Troubleshooting

Certifications

For model: KQi100P / KQi100F

The product complies with relevant certifications including FCC, CE, RoHS, REACH, and UL.

FCC Compliance Statement (USA): This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. FCC ID: 2AZ6G-K1YC3121

Industry Canada (IC) Compliance Statement (Canada): This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to two conditions: (1) it may not cause interference, and (2) it must accept any interference, including interference that may cause undesired operation. CAN ICES-3(B)/NMB-3(B). IC: 27459-K1YC3121

Radiation Exposure: This equipment complies with FCC and IC radiation exposure limits for an uncontrolled environment. It should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Note on Modifications: Unauthorized modifications could void the user's authority to operate the equipment.

Note on Interference: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.