MRGEN21 - USER MANUAL
Document Date: 10.11.2021
Revision: 1.0
Page: 1 of 2
Publication Date: 10 November 2021
Product Overview
ZF Autocruise France S.A.S., a supplier for the automotive industry, presents the MRGEN21 device. This unit is sold to vehicle manufacturers and is designed for mounting behind the vehicle bumper. The information provided herein is intended to be included in the end product's user manual.
Regulatory Compliance Statements
This device contains licence-exempt transmitters/receivers that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s) and part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device must not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Unauthorized changes or modifications to this equipment by ZF Autocruise France S.A.S. may void the FCC authorization to operate this equipment.
French Compliance Statement: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Radiofrequency Radiation Exposure Information
This equipment complies with FCC and IC radiation exposure limits for an uncontrolled environment. It should be installed and operated with a minimum distance of 20 cm between the radiator and the user's body. The transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Class B Digital Device Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, as per Part 15 of the FCC Rules. These limits are established to provide reasonable protection against harmful interference in residential installations. The equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a specific installation.
If this equipment causes harmful interference to radio or television reception (which can be verified by turning the equipment off and on), users are encouraged to attempt to correct the interference using one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from the one the receiver is connected to.
- Consult the dealer or an experienced radio/TV technician for assistance.
Contact and Certification
Name: Rafal Kucharzyk
Title: RF Homologation and Certification Specialist
Email: rafal.kucharzyk2@zf.com
Telephone: +48 42 293 8174
(Digitally signed by Rafal Kucharzyk)
PROPRIETARY NOTICE: This copyrighted document is the property of ZF and is disclosed in confidence. It may not be copied, disclosed to others, or used for manufacturing, without the prior written consent of ZF. © 2021
ZF Autocruise France S.A.S.
S.A.S. au capital de 1 000 000€. Siège social: 760 avenue du Technopôle 29280 PLOUZANE France.
SIRET 380 295 451 00047. Code APE 2651A. Tél: +33 (0) 2.98.45.43.68. www.autocruise.com
Filiale de ZF. ZF Headquarters: Friedrichshafen. Trade register of the municipal court of Ulm HRB 630206. www.zf.com
Homepage ZF Friedrichshafen AG - ZF
