Pyramid Seat Cowl Fitting Instructions

Kit Includes:

• 1X C18555: Seat Cowl
• 4X CALU0002: Aluminium Tabs
• 1X CFOA0006: Foam Strip 80mm X 12mm X 12mm

Pre-fitted by Pyramid (refer to original fitted sample)

Fitting Steps:

• Remove the pillion seat.
• Slide the seat cowl on from the rear of the seat.
• Once the seat cowl is in place, apply pressure on the aluminium tabs to secure the seat cowl in place.
• Fit the seat back on the bike.

View of underside of seat with cowl fitted.

Kit Includes:

• 1X C18555: Seat Cowl
• 4X CALU0002: Aluminium Tabs
• 1X CFOA0006: Foam Strip 80mm X 12mm X 12mm

Pre-fitted by Pyramid (refer to original sample)

Fitting Steps:

• Remove the pillion seat.
• Slide the seat cowl on from the rear of the seat.
• Once the seat cowl is in place, apply pressure on the aluminium tabs to secure the seat cowl in place.
• Fit the seat back on the bike.

View of underside of seat with cowl fitted.