WALI CS303N Wooden Floating Wall Mount Shelf
INSTALLATION MANUAL
Parts List
- A1 (x1)
- A2 (x1)
- A3 (x3)
- B1 (x8)
- B2 (x2)
- B3 (x4)
- B4 (x7)
- B5 (x6)
- B6 (x6)
- B7 (x8)
- B8 (x8)
- B9 (x1)
Installation Steps
-
Step 1
Attach part A2 to part A1 using B4 (x1). Ensure the correct orientation as shown in the diagram.
-
Step 2a
Mount the shelf to the wall. Use B1 (x8) and B3 (x4) for securing the shelf to the wall bracket. Ensure the wall bracket is level. The diagram shows using a level and drilling holes of appropriate size (4mm or 5/32").
-
Step 2b
Attach the wooden shelves to the wall bracket. Use B7 (x8) and B8 (x8) to secure the shelves to the bracket. Part B9 (x1) is used to connect the two main vertical supports.
-
Step 3
Insert the dowels (B2x2) into the designated holes on the vertical supports (A3x3). Then, attach the shelves using the provided screws.
-
Step 4
Assemble the main structure. The diagram shows attaching the vertical supports to the shelves using screws B4 (x6), B5 (x6), and B6 (x6). Ensure correct alignment and use of all parts.
-
Step 5
Final assembly. The diagram illustrates attaching the assembled shelf unit to the wall bracket using screws B7 (x8) and B8 (x8). Part B9 (x1) is used to connect the two vertical supports at the top.
Support
For assistance, please contact support@walielectric.com.
