Home Decorators Collection LED Mini Pendant

Thank You

We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this LED Mini Pendant. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Home Decorators Collection!

Safety Information

Read all instructions before assembling and installing.

Consult a qualified electrician for installation of this fixture.

For non-electrical questions, contact Customer Service at 1-800-986-3460 or visit www.homedepot.com/homedecorators.

Reference SKU: 1003 427 724 (UPC: 773546288101).

Keep receipt and instructions for proof of purchase.

⚠️ CAUTION: Before starting installation or removal, disconnect power at the main fuse box.

IMPORTANT: Do not install in damp or wet locations.

IMPORTANT: Inspect wire insulation for damage (cuts, abrasions, exposed copper). If damaged, do not proceed and call Customer Service at 1-855-HD-HAMPTON.

Warranty

Limited Warranty

What is Covered

Manufacturer warrants this lighting fixture against defects in materials and workmanship for three (3) years from the date of purchase. This warranty applies only to the original consumer purchaser for products used in normal service. If defective, manufacturer's sole obligation and your exclusive remedy is repair or replacement, provided the product has not been damaged by misuse, abuse, accident, modification, alteration, neglect, or mishandling.

What is Not Covered

This warranty does not cover products improperly installed, set-up, or used contrary to instructions. It does not cover failures due to accident, misuse, abuse, negligence, alteration, faulty installation, or issues not related to material or workmanship defects. Finish or weathering is considered normal wear and tear and is not covered. The manufacturer disclaims any implied warranty of fitness for a particular purpose. Manufacturer is not liable for consequential or incidental loss or damage, including labor costs for replacement or repair.

Contact Customer Care at 1-800-986-3460 or visit www.homedepot.com/homedecorators.

Pre-Installation

Planning Installation

Read all instructions before assembly and installation. Assemble on a soft, non-abrasive surface (e.g., carpet, cardboard) to prevent damage. Inspect parts for shipping damage. Keep receipt and instructions.

Tools Required

• Safety goggles
• Phillips screwdriver
• Flathead screwdriver
• Wire strippers
• Wire cutters
• Ladder

Hardware Included

NOTE: Hardware not shown to actual size.

Package Contents

The package contains the following parts:

Installation

Step 1: Installing the Center Rods

⚠️ WARNING: Turn off power at the main fuse box.

Carefully unpack the fixture and lay out all parts on a clean surface. Unfold fixture arms. Unravel supply power and ground wires and pass them through the center hole of rods (B), (C), (D), (E), and canopy (F). Install center rods (B), (C), (D), (E), and canopy (F) by twisting clockwise.

Step 2: Making the Electrical Connections

NOTE: Use wire nuts (AA) to connect wires and push excess wires/connections back into the canopy (F).

Connect the red wire of the driver to the red wire of the fixture. Connect the blue wire of the driver to the blue wire of the fixture.

Wire Connections:

• Red Wire (from Driver) to Red Wire (to Fixture)
• Black Wire (from Driver) to Black Wire (to Fixture)

Step 3: Installing the Universal Crossbar

⚠️ WARNING: Turn off power at the main fuse box.

Secure the universal crossbar (EE) to the junction box (not included) using the two outlet box screws (BB).

Step 4: Making the Electrical Connections (Ground Wire)

NOTE: Use wire nuts (AA) to connect wires and push excess wires/connections back into the junction box (not included).

Connect the ground wire from the branch circuit to the ground screw (CC) on the universal crossbar (EE).

Fixture Wire Connections:

• White Wire (from House) to White Wire (to Fixture)
• Black Wire (from House) to Black Wire (to Fixture)
• Ground Wire (from House) to Ground Wire (from Canopy)

Step 5: Installing the Canopy

Install the canopy (F) onto the universal crossbar (EE) using mounting screws (DD).

Step 6: Installing the Glass

Install the small glass (G) and large glass (H) onto the fixture body (A) by twisting clockwise to secure.

FCC Statement

⚠️ WARNING: Changes or modifications not expressly approved by the responsible party for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with Class B digital device limits per Part 15 of FCC Rules. These limits provide reasonable protection against harmful interference in residential installations. The equipment generates, uses, and can radiate RF energy. If not installed and used per instructions, it may cause harmful interference to radio communications. No guarantee is made that interference will not occur in a particular installation. If interference occurs, try one or more of these measures: Reorient/relocate the receiving antenna. Increase separation between equipment and receiver. Connect to a different circuit. Consult dealer or experienced radio/TV technician.

Care and Cleaning

Clean the light fixture carefully with a soft, dry cloth. Do not use chemical cleaners, solvents, or harsh abrasives.

Troubleshooting