Vango Mulia Air 550XL Tent
Brand: Vango
Model: Mulia Air 550XL
This document provides instructions for pitching (setting up) and taking down (packing) the Vango Mulia Air 550XL tent. It is recommended that the tent be erected by at least 2 people.
Pitching Instructions
Section A: Initial Layout and Pole Insertion
Diagram A: Lay out the tent fabric. Insert the air poles into the sleeves and connect them to the tent at the marked points.
Visual representation of initial tent layout, airbeam insertion, and connection points.Airspeed® Inflation System
Diagram: Airspeed®
(i) Locate the inflation valve.
(ii) Connect the pump hose.
(iii) Inflate to approximately 4-5 PSI.
Steps for connecting pump and inflating airbeams via the Airspeed valve.Pegs and Guy Lines
Diagram: Poles
(i) Insert pegs into the ground.
(ii) Attach guy lines to tent loops and pegs.
(iii) Tension the guy lines.
Instructions for securing the tent with pegs and guy lines.Section B: Inflation and Securing
Diagram B: Inflate the airbeams using the Airspeed system. Secure the tent by pegging it down at all designated points and attaching guy lines.
Visual representation of tent inflation and initial pegging.Section C: Final Pitching and Tensioning
Diagram C: The tent is fully pitched. Adjust all guy lines and tensioning systems for a taut and stable structure.
Visual representation of the fully pitched tent.TBS®II Tensioning System
Diagram: TBS®II
(i) Locate the internal tensioning straps.
(ii) Adjust the straps to create tension.
(iii) Secure the straps.
Steps for adjusting the TBS®II internal tensioning system.Taking Down and Packing Instructions
Section A: Deflation
Diagram A: Open the Airspeed valves to release air from the tent.
Visual representation of opening Airspeed valves for deflation.Section B: Collapsing the Tent
Diagram B: Fold the tent fabric inwards towards the center, bringing the airbeams together.
Visual representation of folding the tent fabric inwards after deflation.Section C: Folding and Rolling
Diagram C: Fold the tent lengthwise, then roll it up tightly.
Visual representation of folding the tent lengthwise and rolling it tightly.Section D: Packing into Bag
Diagram D: Place the rolled tent into the carry bag.
Visual representation of placing the rolled tent into the carry bag.Section E: Packed Tent
Diagram E: The fully packed tent.
Visual representation of the fully packed tent.Pole Assembly/Disassembly
Diagram: Poles
(i) Shows pole sections.
(ii) Connect pole sections.
(iii) Disconnect pole sections.
Diagram showing assembly/disassembly of poles, potentially for accessories.Manufacturer Information
Vango makes every effort to ensure the accuracy of our information. We do however have a policy of continuous improvement and we therefore reserve the right to change or amend colours and specifications without prior notice. © AMG Group Ltd.
