Ecotap Duo Wide XL - Specifications
Ecotap B.V., a brand of Legrand
General Characteristics
| Reference number | 668062 / 65020010 / 65458063 |
| Reference number (Eichrecht) | 65458062 |
| Dimension H x W x D (mm) | 1746 x 573 x 394 |
| Casing material | Steel 3,7 mm |
| Standard colour | Body: Ral 6018 / Cover: Ral 9016 for 668062 / 65458062 / 65458063 Body: Ral 9016 / Cover: Ral 9016 for 65020010 |
| Steel treatment | Anti-corrosion (KTL) and powder coating |
| Weight (kg) | 85kg |
| Number of charging points | 2 |
| Socket | Type 2 |
| Cable | Type 2 |
| Kabel | Type 2 |
Electrical Characteristics
| Power output per socket | 0 to 22kW |
| Operating voltage (Ue) / Rates current (In A) for the charger | Single-phase cabling, phase + N 230V~ from 0 to 80A (determined at 20°C) Three-phase cabling, 3 phases + N 400V~ from 0 to 80A (determined at 20°C) |
| Operating voltage (Ue) / Rates current (In A) per charge point | Single-phase cabling, phase + N 230V~ from 0 to 32A (determined at 20°C) Three-phase cabling, 3 phases + N 400V~ from 0 to 32A (determined at 20°C) |
| Impulse voltage (Uimp) | 4kV |
| Insulation voltage (Ui) | 230V single-phase 500V three-phase |
| Frequency (fn) | 50Hz/60Hz |
| Rated voltage | 1 phase + N: 230V – 3 phases + N: 400V |
| Voltage tolerance (V) regardless of vehicle requirements | 195V - 265V |
| Integrated protection system on charging station | Mainblade fuse holder 50A |
| Integrated protection system per charge point | Fuseholder 32A Gg RCD 63A 30mA Type B |
| Conditional short-circuit | 6000A IEC/EN 60898-1 10kA IEC/EN 60947-2 |
| Allowable thermal stress in Short Circuit | 16 000 A²s |
| Connection to the mains | Phase/Neutral, rigid cable, 2.5 to 35 mm², screw terminals H07 V R/U Earth, rigid cable, 2.5 to 35mm², screw terminals H07 V R/U |
| Type of load | Mode 3 charging terminal equipped with a locking system for Mode 3 |
| Vehicle connection Mode 3 connector socket | Type 2 3P+N (single-phase compatible) with pilots compliant with IEC 62191-1 and IEC 62196-2. Use only a manufacturer-approved plug with silver-plated contacts. Use of extension and adapter prohibited. |
| Phase rotation on channel 2 (Rightside) | In the case of monophase cabling (Ph+N) on the power source. Channel 2 will not be able to start charging sessions, until the phase rotation between contactor and socket are manually undone. |
| AC meters | MID certified, Class B according to EN 50470-1, -3 |
| Back office protocol | OCPP 1.6 Json |
| Positioning | GPS |
| Connectivity Ethernet | 668062 / 65020010 / 65458062 |
Environment
| Operating temperature | -25°C / +50°C |
| Storage temperature | -25°C / +80°C |
| Relative humidity | 0 to 90% without condensation |
| Protection rating | IP 54 (IEC 60529), IK 10 (EN 62262) Plugged in or not |
| Noise level | < 40 dBA at 1m |
| Product | IEC 61851-1, IEC TS 61439-7 (AEVCS) |
| Installation | Interior or exterior, limited access zone, intended for use by ordinary persons (DBO), assembly in cabinet (wall mounted), Pollution Degree 3, TNS, TT, compatible earthing system. In the event of an IT earthing system, this can be changed locally by adding an isolation transformer. |
| Electrical safety | Class 1 IEC 61140 |
| Elektrische veiligheid | Klasse 1 IEC 61140 |
Electromagnetic Compatibility
| European standards | Low Voltage Directive 2014 / 35EU / EMC Directive: 2014/30/EU |
| Radio technology type | GSM 2G/3G/4G, GPRS, RFID |
| Suitable charging cards | Mifare, Ntag and iCODE SLI cards |
