Azatom iBigboy 2AD BTX ICD

Feature

• iPod/iPad/iPhone/Android 4.2 compatible.
• AM/FM tuner.
• AUX input to connect to external devices.
• Bluetooth input to connect to external devices.
• LED display.
• Easy to use Remote Control.
• Touch screen control.
• Alarm clock.
• Standby function.
• Individual Sub-woofer control.

Important Safety Instructions

[!] CAUTION: DO NOT OPEN RISK OF ELECTRIC SHOCK. Do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified personnel.

[!] High Voltage Warning: The lightning flash with arrowhead symbol inside an equilateral triangle is intended to alert the user that the presence of un-insulated "hazardous voltage" within the product's enclosure, which may be of sufficient magnitude to induce a risk of electric shock to persons.

[!] Important Information: The exclamation mark inside an equilateral triangle is intended to alert the user that the presence of important operation and maintenance (servicing) instructions in the literature accompanying the product.

[Double Insulation]: This symbol means that this unit is double insulated. An earth or ground connection is not required.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, if sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. [Portable Cart Warning]
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
16. The MAINS plug is used as the disconnect device, which shall remain readily operable.
17. The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
18. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Company name: First Audio Manufacturing (Guangzhou) Ltd.

Product name: 2.1 Speaker for iPad/iPhone/iPod/Android

Item Number: iBigboy 2AD BTX ICD

Hereby, First Audio Manufacturing (Guangzhou) Ltd., declares that this 2.1 Speaker for iPad/iPhone/iPod/Android is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

The declaration of conformity may be consulted at Imports / manufacture Name: First Audio Manufacturing (HK) Ltd.

Imports / manufacture Address: 3/F., Block A, Wing Kut Industrial Bldg., 608 Castle Peak Road.

Functional Illustration

Top Panel Controls:

• 1. DOCK: Connects to iPod/iPhone/iPad/Android devices.
• 2. Standby: Puts the speaker into standby mode.
• 3. Input select: Cycles through input sources (DOCK, BT, AUX, AM, FM).
• 4. Setup: Accesses setup menus for time, alarm, and audio adjustments.
• 5. Play/Pause: Controls playback of music.
• 6. Previous button: Skips to the previous track or rewinds.
• 7. Next button: Skips to the next track or fast-forwards.
• 8. Vol-: Decreases volume.
• 9. Vol+: Increases volume.
• 10. Display: Shows current mode, time, or track information.
• 11. IR remote receiver: Receives signals from the remote control.

Rear Panel Ports:

• 1. AM 300 Ω antenna input: For connecting the AM loop antenna.
• 2. FM 75 Ω antenna input: For connecting the FM antenna.
• 3. AUX input: Connects external audio devices via AUX cable.
• 4. Power switch: Turns the unit ON or OFF.
• 5. AC input: Connects the power cord.

Remote Control

• 1. [Standby]: Puts the unit in standby mode.
• 2. [Mute]: Mutes or unmutes the audio output.
• 3. [INPUT]: Selects input source (Bluetooth, FM/AM, or AUX).
• 4. [Display]: Controls display mode.
• 5. [SETUP]: Sets up time and alarm.
• 6. [iPod menu up]: Navigates up in iPod menus.
• 7. [MENU]: Accesses DOCK menu.
• 8. [iPod menu down]: Navigates down in iPod menus.
• 9. [Previous track/fast rewind]: Skips to previous track or fast rewinds.
• 10. [ENTER]: Confirms selection.
• 11. [Next track/fast forward]: Skips to next track or fast forwards.
• 12. [DOCK REPEAT]: Sets repeat mode for DOCK playback (one song, all songs, off).
• 13. [DOCK/Bluetooth play/pause]: Controls playback and pause for DOCK or Bluetooth sources.
• 14. [DOCK Shuffle]: Enables or disables shuffle play for DOCK sources.
• 15. [TREBLE]: Adjusts treble levels.
• 16. [VOLUME]: Adjusts master volume.
• 17. [Bass]: Adjusts bass levels.

Remote Control Setup

Getting Started:

Insert one lithium battery (CR2025) into the remote control. Ensure the polarity is correct before inserting the battery. The plus (+) polarity on the battery should be facing up. Refer to the markings in the battery compartment.

Notes:

1. Use only the size and type of battery specified.
2. Be sure to follow the correct polarity when installing the battery as indicated in the battery compartment. A reversed battery may cause damage to the device.
3. Do not drop or step on the remote control; this may cause internal damage to the device.
4. If not using the remote control for a long period of time, remove the battery to avoid possible damage due to battery leakage.

Remote control effective range:

Aim the remote control at the unit's IR receiver. The distance to the unit should be less than 5 meters and within a 30° angle.

The remote control may be less effective if:

1. The unit is placed under intense ambient lighting.
2. There are obstacles between the remote control and IR receiver.
3. Other remote controls are operated at the same time.
4. Low battery power.

Connection

Connecting Mobile Devices (iPod/iPhone/iPad/Android):

Switch off the iPod/iPhone/iPad/Android and the unit before docking. Select the appropriate docking adapter that matches your smart phone. Insert the correct docking adapter onto the DOCK, then connect your iPod/iPhone/iPad/Android Phone accordingly. Make sure your iPod/iPhone/iPad/Android Phone is connected securely before playing the system.

Docking Adapters:

Diagrams show different adapters for Android, iPhone/iPod/iPad, and New iPhone/iPod/iPad.

Docking Process:

Diagrams show the speaker unit with different mobile devices being docked.

Attention: To prevent any damages to the base connector, do not shake or bump the iPod/iPhone/iPad/Android Phone during playback.

Connecting Audio Sources:

Antenna Connections:

• AM Loop Antenna (Supplied): Connect to the AM ANT. 300Ω port.
• FM Antenna (Supplied): Connect the 75 Ω coaxial cable to the FM ANT. 75Ω port. Ensure the antenna is oriented towards the broadcasting station for best reception. An FM indoor antenna is also provided.

Other Audio Sources:

• CD/DVD Player: Connect the audio output of a CD/DVD player to the AUX IN port using an audio cable. Connection to CD/DVD is optional.

Note: Please remove plastic from wire tips that are attached to the radio antenna and insert both wires to the AM port.

Operation Instructions

START

Connect the power and turn the power switch to "ON". The speaker will enter standby mode, and the LED screen will be dimly lit. Press and hold the [Standby] button; the speaker turns to working mode, and the LED screen will be brighter.

INPUT

Press [INPUT] to cycle through input modes. The sequence is: DOCK → BT → AUX → AM → FM.

MUTE

Press [MUTE] to enter mute mode. Press the button again or use [Volume +] / [Volume -] to exit mute mode.

SETUP

When under AUX, DOCK, or BT mode, pressing [SETUP] cycles through modes:

TIME [time set] → SLxx [sleeping time set] → ALM [alarm time set] → Txxx [Treble adjust] → Bxxx [Bass adjust] → Recent time.

When under FM/AM mode, pressing [SETUP] cycles through modes:

MEN → Recent frequency → Bxxx [Bass adjust] → Txxx [Treble adjust] → TIME [time set] → ALM [alarm time set] → ALM [sleeping time change].

1. When "Bxxx" or "Txxx" is displayed, use [Previous] / [Next] buttons to adjust the level of bass or treble.

2. When "TIME" is displayed, set the "hour" and "minute" using [Previous] / [Next], then press [ENTER] to confirm.

3. When "SLxx" is displayed, set the sleeping time by pressing [Previous] / [Next] (options: 00, 05, 10, 15, 20, 25, 30, 40, 50, 60, 70, 80, 90 minutes). Press [ENTER] to confirm. When time is up, the speaker returns to standby mode. "00" means the sleeping function is turned off.

4. When "ALM" is displayed, press [ENTER] to turn on the alarm mode. "ON/OFF" will be displayed. Use [Previous] / [Next] to toggle between "ON" and "OFF". Choose "ON" and press [ENTER] to set the alarm time using [Previous] / [Next]. Press [ENTER] again to select the alarm mode, then press [ENTER] to confirm.

Note: Adjustments for the above modes can be controlled using [Previous] / [Next] and [ENTER] (or the [SETUP] button on the unit).

FM/AM Mode Specifics:

When under FM mode, the FM indicator lights up. The radio frequency blinks when [SETUP] is pressed twice. Use [Previous] / [Next] to manually search for stations step-by-step. Hold the button to perform a fast search.

Bluetooth Mode Specifics:

When under BT mode, [Previous] / [Next] buttons function as previous and next track selection.

VOLUME

Press [Volume +] / [Volume -] to control the volume. [Volume +] increases volume, and [Volume -] decreases volume. Max volume: 40 dB, Min volume: 0dB.

TREBLE

TREBLE [+/-] is for controlling the volume of treble. Range of adjustment: ±10dB.

BASS

BASS [+/-] is for controlling the volume of bass. Range of adjustment: ±10dB.

AUX

Press [INPUT] until AUX mode is selected. The "AUX" indicator will show on the LED Display. Audio signals from devices like DVD or CD players can be input into the speaker.

DOCK

1. MENU: Pressing [MENU] returns to the previous menu when in DOCK mode. This function is not available in AUX, TUNER, or BT modes.
2. [Previous] / [Next]: Use these buttons to switch tracks. Holding them will fast forward or rewind the music. This function is only available in DOCK mode.
3. ENTER: Press [ENTER] briefly to confirm selections in DOCK mode, or to confirm time and alarm settings.
4. [Repeat Mode]: When in DOCK mode, this button cycles through repeat modes: "ONE" (single repeat), "ALL" (repeat all songs), "OFF" (repeat disabled).
5. [Random Play]: When in DOCK mode, this button enables or disables random playback. Press repeatedly to switch between "ON" and "OFF".

Note: The Android docking can provide music playback and charging simultaneously for models with Android 4.2 or above, provided digital audio out is enabled.

BLUETOOTH

1. Press [INPUT] on the control panel or remote until "BT" mode is shown. The dot next to the BT symbol will flash rapidly, indicating the speaker is available for pairing.

2. Activate Bluetooth on your device, search for this speaker, and connect. Once connected, the dot will flash slowly.

Note: If a PIN code is requested, enter "0000". Some devices may require connection approval.

Note: Once paired, subsequent connections will be automatic if the device is within Bluetooth range.

3. Adjust the volume to your desired level.

4. APT-X is available.

LISTENING TO THE RADIO

FM/AM MODE

Manual Search: Hold [Manual Search] (symbol: Q) for a few seconds in FM/AM mode. When a station signal is found, the frequency display stops changing. Hold [Next Station] (symbol: / ) to search for the next station.

Automatic Search: Press [SETUP] until "MEM" is displayed. Press [ENTER] to confirm. The speaker enters automatic search mode and scans for available radio frequencies. After searching, use [Previous Station] / [Next Station] to select a found station.

DISPLAY MODE

Press the [Display Mode] button to switch between clock and operation mode displays.

Specification

• VOLTAGE RATING: AC220/230/240V 50Hz/60Hz (Depends on distribution area, please refer to back panel of this unit)
• POWER CONSUMPTION: 200W
• POWER CONSUMPTION STANDBY: 1W (with display on)
• OUTPUT POWER:
  • L/R CH(Nominal): 30W+30W THD = 1% 8 ohm
  • SW CH(Nominal): 64W THD = 1% 4 ohm
• FREQUENCY RESPONSE: L/R CH (200Hz-20KHz at +1 / -2dB), SW (40Hz-200Hz at +4 / -13dB)
• SENSITIVITY: L/R: 550mV, SW: 200mV
• OVERLOAD SOURCE e.m.f.: ≥2V
• SEPARATION: ≥55dB
• S/N: ≥70dB
• REMOTE CONTROL: ≥5m/30°
• DIMENSION (with base plate): 580 (W)×220(D)×860(H)mm

[Do not dispose with household waste]: Do not throw away the battery with general house waste; dispose of it correctly as chemical waste.

[Recycling symbol for electrical and electronic equipment]: Disposal of old electrical & electronic equipment (applicable in the European Union and other European countries with separate collection systems). This symbol on the product or its packaging indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service, or the shop where you purchased the product.