AZATOM STUDIO WAVE SV100 Home Entertainment System

Important Safety Instructions

• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenient receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.

Special note: When placing your unit on a lacquered or natural finish, protect your furniture with a cloth or other protective material.

FCC Warnings

WARNING:

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Additional Warnings

• The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus. (L'appareil ne doit pas être exposé aux écoulements ou aux éclaboussures et aucun objet ne contenant de liquide, tel qu'un vase, ne doit être placé sur l'objet.)
• Battery shall not be exposed to excessive heat such as sunshine, fire or the light. (Les piles ne doivent pas être exposées à de forte chaleur, tel qu'à la lumière du soleil, au feu ou autres choses de semblable.)
• Caution marking is located at the rear or bottom of the apparatus. (Attention marquage est situé sur le paneau arrière ou inférieur de l'unité.)
• The marking information is located at the rear or bottom of apparatus. (Le marquage est situé sur le paneau arrière ou inférieur de l'unité.)
• This symbol indicates that this product incorporates double insulation between hazardous main voltage and user accessible parts. [Double Insulation Symbol]

01 Checking the Components

The following components are included in the package:

• AZATOM STUDIO WAVE SV100 Soundbar
• Remote Control
• Power Adapter
• 3.5mm to 3.5mm audio cable
• Wall mount brackets
• Wall mount screws
• Wall mount template

A visual representation of the soundbar, remote control, power adapter, audio cable, wall mount brackets, screws, and template is provided.

02 Product Overview

Front Panel / Top Side Panel of the Soundbar

A diagram shows the front/top of the soundbar with control buttons and an LED indicator. The buttons include Power, Mode, Volume Up, and Volume Down. The LED indicator (labeled '1') displays different colors for different modes.

• When you plug in the power cord, the buttons will begin working in 2 to 4 seconds.
• If you want to enjoy sound only from the Soundbar, you must turn off the TV's speakers in the Audio Setup menu of your TV. Refer to the owner's manual supplied with your TV.

LED indicator colors and corresponding modes:

• Bluetooth
• Optical
• AUX
• Coaxial
• USB

Bottom Panel of the Soundbar

A diagram illustrates the rear panel of the soundbar with various ports:

• DC IN (Power Supply In): Connect the AC/DC power adapter.
• USB: Connect a USB device to play music files through the Soundbar.
• AUX (3.5mm): Connect the analog output of an external device.
• OPTICAL: Digital Audio In (optical). Connect to the digital (optical) output of an external device.
• COAX IN: Connecting using a Coaxial cable.
• SUB OUT: Connect the included SUB OUT cable to the Subwoofer +/- (Red & Black) and Sound Bar.

Important notes regarding power connection:

• When disconnecting the power cable of the AC/DC power adapter from a wall outlet, pull the plug. Do not pull the cable.
• Do not connect this unit or other components to an AC outlet until all connections between components are completed.

03 Connecting Electrical Power

A diagram shows the bottom panel of the soundbar and a wall outlet. The power adapter connects the unit to the electrical outlet.

• Make sure to place the AC/DC adapter flat on a table or the floor. If you place the AC/DC adapter so that it is hanging with the AC cord input facing upwards, water or other foreign substances could enter the adapter and cause it to malfunction.

04 Connecting with a TV

Connecting using an Optical cable

A diagram illustrates connecting the soundbar to a TV using an optical cable.

1. Connect the DIGITAL AUDIO IN (OPTICAL) jack on the Soundbar to the OPTICAL OUT jack of the TV with a digital optical cable.
2. Press the "OPT" button on the remote, and the LED indicator will be WHITE.
3. Set the TV's audio output to "PCM". (More information on PCM page)

If TV sound is inaudible, press the "OPT" button on the remote or on the top side of the Soundbar to switch to "OPT" mode. The LED will be White and TV sound is played.

05 Setting “PCM” on your TV

If there is no sound from the TV or Soundbar after proper connections and LED indication, adjust your TV's audio settings:

1. Press “Menu” on the TV’s remote control.
2. Press the arrow keys on the remote to scroll to “Audio Settings.”
3. Press “OK” on the remote control.
4. Scroll to “Advanced Audio” and press “OK.” (Some televisions may not have an “Advanced Audio” menu and may list various audio settings instead.)
5. Scroll to “Audio Output Mode” or “Digital Audio Output Mode” and press “OK.”
6. Scroll until “PCM” is displayed as the current audio output.
7. Press “OK” to save the settings.

* Some brand TVs may have different Digital Audio Output Settings; please check your TV’s manual.

06 Connect an external speaker (subwoofer)

A diagram shows the connection of an external subwoofer to the soundbar using an audio cable. The subwoofer is sold separately.

• Subwoofer sold separately.

07 Connecting an External Device

Diagrams show how to connect external devices via Optical and AUX inputs.

• Connect DIGITAL AUDIO (OPTICAL) on the Soundbar to the OPTICAL OUT jack of the Source Device using a digital optical cable. Select "WHITE" LED indicator by pressing the "OPT" button on the remote.
• Connect AUX on the Soundbar to the "AUX" jack of the Source Device using a 3.5 mm to 3.5 mm audio cable. Select "orange" LED indicator by pressing the "AUX" button on the remote.

The diagram shows connections to a BD/DVD/Set-top box/Game console.

08 Connecting a USB

A diagram illustrates connecting a USB device to the soundbar.

1. Connect your USB device to the USB jack on the Soundbar.
2. Select "PURPLE" LED indicator by pressing the "USB" button on the remote.
3. Play music files from the USB device through the Soundbar.

* USB port also for firmware upgrade.

09 Connecting a Bluetooth Device

The initial connection

1. Press the "BT" button on the remote; the LED indicator blinks blue.
2. Turn on the Bluetooth device (refer to the device's manual for more information).
3. Select "SV100" from the list and connect it. When your Bluetooth device is connected, the LED indicator blinks blue slowly.
4. Play music files from the device, connected via Bluetooth, through the Soundbar.

* You cannot connect more than one Bluetooth device at a time.

Additional Bluetooth information

1. If you hear any break-up while streaming music from your device, move closer to your Soundbar.
2. Bluetooth signal has a range of up to 30 feet if there are no solid obstructions between your Soundbar and source device.
3. Other wireless devices may interfere with Bluetooth range, including wireless video monitors, cordless phones, wireless cameras, etc. Moving or turning off these devices may improve Bluetooth range.

A diagram shows a soundbar and a smartphone with Bluetooth signals. Another diagram shows a soundbar with a warning symbol about volume.

• Reduce the volume on your device or Soundbar; high volume can damage your hearing.

10 Know Your Remote

Power the remote by inserting 2 pcs of AAA batteries.

• Power Button: Turns the device on/off.
• Volume Up: Increases the volume.
• Volume Down: Decreases the volume.
• Mute / Unmute: Mutes or unmutes the audio.
• Previous track: Skips to the previous track.
• Next track: Skips to the next track.
• Optical mode: Selects Optical input.
• USB mode: Selects USB input.
• Coaxial mode: Selects Coaxial input.
• Bluetooth mode: Selects Bluetooth input. (Press and hold to disconnect BT)
• AUX mode: Selects AUX input.
• Recommended audio mode-MOVIE: Selects Movie audio preset.
• Recommended audio mode-DIALOG: Selects Dialogue audio preset.
• Recommended audio mode-MUSIC: Selects Music audio preset.
• Increase or decrease treble: Adjusts the treble levels.
• Increase or decrease bass: Adjusts the bass levels.
• Reset treble and bass: Press and hold to reset treble and bass to factory settings.

11 Installing the Wall Mount

1. Insert the two wall-mount screws into the wall-mount screw holes, and tighten them with a screwdriver.
2. Place the wall mounting template against the wall under your TV, using a pencil to mark the bracket holes. Ensure the template is level and leaves at least 3 inches between the template and the TV.
3. Remove the template. Using an appropriately sized drill bit, drill a hole in the wall at each marking. Ensure the wall is vertical (for drywall).
4. Push the green Holder-Screws into each hole on the wall, and screw each supplied screw firmly through each bracket into a support Holder-Screws hole.
5. Install the Soundbar by hanging the bracket on the wall.

Consult a professional installer if you are unfamiliar with power tools or the layout of electrical wiring in the walls of your home.

Diagrams illustrate the process of attaching brackets to the soundbar, using a template to mark wall positions, drilling holes, and mounting the soundbar.

12 Troubleshooting

If you encounter a problem with your Sound Bar, try these quick solutions:

• Ensure all cables between the Sound Bar and input devices are securely connected, and the power adapter is connected to a working power source.
• Verify the adapter LED indicator is lighting, and the LED indicator on the Soundbar is also lit.

No sound or crackling noise

• Check if all cables are connected properly.
• Press Mute on the remote to ensure the Sound Bar is not muted.
• Press Volume+ on the remote or the top side of your Soundbar.
• Make sure you have selected the right input source on your remote, and the LED is lighting accordingly.
• If using Bluetooth, check if the sound on your device is under minimum volume.
• If using Optical, check if your device (TV/Cable Box/Projector/etc.) audio output is set to PCM or if Dolby/dts is turned off.
• When using a cable connection, ensure your device has an audio output port (not input).

Remote isn't working

• Check if the battery is installed properly with power.
• Check if the signal receiver is obstructed.
• Contact your retailer for assistance.

I hear buzzing or humming

• Ensure all cables and wires are securely connected.
• Connect a different source device (TV, Blu-ray player, etc.) to see if the buzzing persists. If it does not, the problem may be with the original device.
• Connect your device to a different input on the Sound Bar.

Bluetooth can’t be connected

• Check if the Sound Bar is already connected with a third Bluetooth device.
• Ensure there are no solid obstructions between the Sound Bar and source device (within 30 feet).
• Reboot the Bluetooth device and try connecting again.

Hear echo when watching TV

• Set your TV audio to "External Speaker."
• Mute the TV speaker.

Have other questions?

Please contact AZATOM for assistance.

A diagram shows the AZATOM website and social media icons.

Product Registration and Warranty

Register your product online at WWW.AZATOM.COM/WARRANTY to learn more and register for your AZATOM warranty.

AZATOM® 2021 ALL RIGHTS RESERVED. AZATOM® IS PART OF AZATOM GROUP LIMITED.

SEE SITE FOR SAFETY INFORMATION. AZATOM® RESERVES THE RIGHT TO WITHDRAW ANY AND ALL PROMOTIONS WITHOUT NOTICE. FOR FULL WARRANTY, EXTENDED WARRANTY AND PROMOTIONAL OFFER TERMS & CONDITIONS PLEASE VISIT WWW.AZATOM.COM/TERMS-CONDITIONS

*REGISTRATION REQUIRED