AZATOM Equinox 2 M4 Bookshelf Speakers
Model: Equinox 2 M4
Key Features
Experience immersive sound with the AZATOM Equinox 2 M4 2.0 Bookshelf Speakers, featuring:
- Optical Audio
- 2.0 Stereo Sound
- DSP (Digital Signal Processor)
- Line-In Digital Signal
- Bluetooth Connectivity
- Equaliser (EQ) modes: Movie, Music, Dialogue
- Remote Control
- USB MP3 Playback
Box Contents
- Bookshelf Speaker (Active)
- Bookshelf Speaker (Passive)
- Remote Control
- User Manual
- Stereo RCA to 3.5mm Audio Cable
- USB to USB Audio Cable (PC Use)
- Digital Optical Cable
- Power Adapter
Active Speaker Overview
LED Indicators
- Infrared receiver LED Indicator
- Active Speaker LED Indicators: Standby, Bluetooth, USB, ARC, RCA, Optical
Controls and Ports
Controls:
- Power Switch / Input Selection: Cycles through audio sources.
- Previous Track: Skips to the previous track.
- Next Track: Skips to the next track.
- Volume Control / Sound Effects: Press in to cycle through EQ modes (Music -> Dialogue -> Movie).
- Treble Control: Adjusts treble frequencies.
- Bass Control: Adjusts bass frequencies.
Input/Output Ports:
- ARC Input Port
- USB Input Port
- Optical Input Port
- SUB Output Port (for optional subwoofer)
- RCA Input port
- Left Speaker Audio Output (connects to passive speaker)
- Power Port (DC IN)
- Left Speaker Audio In (connects from passive speaker)
Remote Control Functions
- Power Button: Mute/Unmute audio.
- VOL+ : Volume Up.
- VOL- : Volume Down.
- Previous Track: Play the previous audio track.
- Next Track: Play the next audio track.
- Play/Pause: Controls playback.
- OPT: Selects Optical input mode.
- ARC: Selects HDMI ARC input mode.
- BT: Selects Bluetooth input mode.
- USB: Selects USB / DAC input mode.
- RCA: Selects Line input mode.
- MOVIE: Selects Movie EQ mode.
- MUSIC: Selects Music EQ mode.
- DIALOG: Selects Dialogue EQ mode.
Connection Guide
The Equinox 2 M4 system connects an Active Speaker to a Passive Speaker. The Active Speaker manages all inputs.
Connecting Devices
- TV Connection: Use the supplied Digital Optical Cable, Stereo RCA to 3.5mm Audio Cable, or an HDMI ARC cable (not supplied). Select the corresponding input mode (Optical, RCA, or ARC) on the speaker. Ensure your TV's audio output is set to "PCM".
- Bluetooth Connection: Press the 'BT' button on the remote or 'P/M' on the speaker. Pair your device by selecting "Equinox 2". The Bluetooth range is up to 10 meters (30 feet).
- PC/DAC Connection: Use the supplied USB to USB Audio Cable to connect your PC or a DAC to the speaker's USB Input. Select 'USB' mode.
Setting TV Audio to PCM
If no sound is heard, adjust your TV's audio settings:
- Press "Menu" on your TV remote.
- Navigate to "Audio Settings".
- Select "Advanced Audio" or similar.
- Find "Audio Output Mode" or "Digital Audio Output Mode".
- Set the output to "PCM".
- Save the settings.
Specifications
| Feature | Specification |
|---|---|
| Power Output | L/R: 40W + 40W |
| Signal to Noise Ratio (dB(A)) | L/R: 85dB(A) |
| Input Sensitivity |
LINE IN: R/L: 650±50mV ARC: R/L: 500±50mV OPT: R/L: 500±50mFFS Bluetooth: R/L: 700±50mFFS |
| Frequency Response | 35Hz - 20KHz |
| Bass Unit | 4 inch (116mm) |
| Tweeter Unit | 13mm silk dome tweeter |
Troubleshooting
No Sound
- Check power indicator is ON.
- Increase volume.
- Ensure cables are connected securely and the correct input is selected.
- Verify audio source is outputting sound.
Bluetooth Connection Issues
- Confirm speaker is in Bluetooth mode.
- Disconnect other paired devices (press and hold volume dial in BT mode).
- Stay within 10 meters (30 feet) range.
- Try a different Bluetooth device.
No Power
- Check mains power adapter connection to speaker and wall outlet.
- Ensure wall outlet is switched on.
Support and Warranty
Download this manual and find more information at www.azatom.com.
For full warranty, extended warranty, and promotional offer terms & conditions, please visit www.azatom.com/terms-conditions.
AZATOM GROUP LIMITED, TEES VALLEY COURT, WYNYARD BUSINESS PARK, BILLINGHAM, TS22 5FE, UNITED KINGDOM.
