Product Overview
The Finder 80.01 is a versatile modular timer designed for multi-function applications. It offers adjustable time scales and various operating modes, making it suitable for a wide range of industrial and automation tasks.
Key Features
- Multi-voltage supply: 12-240 V AC (50/60 Hz) / DC
- Adjustable time scales from 0.1 seconds to 24 hours
- Multiple functions including On-delay, Off-delay, Interval, and Flasher
- 1 CO (SPDT) changeover contact rated at 16 A / 250 V AC
- LED indicator for status
- DIN rail mounting (EN 60715)
Technical Specifications
Model: 80.01.0.240.0000
Supply Voltage (UN): 12...240 V AC (50/60 Hz) / DC
Minimum Supply Voltage (Umin): 10.8 V AC/DC
Maximum Supply Voltage (Umax): 265 V AC/DC
Power Consumption: < 1.8 VA (50 Hz) / < 1W
Contact Rating: 16 A 250 V AC (AC1)
Operating Temperature: -20...+60°C
Protection: IP20
Wiring and Functions
The Finder 80.01 supports various wiring configurations for different functions. Refer to the provided diagrams for detailed connection instructions:
- 3a: Without signal START functions - Start via contact in supply line (A1)
- 3b: External START functions - Start via contact into control terminal (B1)
- 3c: Control of external load - Connect to signal start terminal B1
- 3d: DC supply polarity - Positive polarity to B1 terminal
- 3e: Alternative voltage for Start command - Apply a voltage other than the supply voltage to B1
Note: Time scale and function must be set before energizing the timer.
Working Conditions
The timer relay is designed to operate within specified environmental conditions. It offers a high level of immunity to disturbances as per European Directive on EMC 2014/30/EU. For optimal performance, ensure wiring cables are kept as short as possible and consider surge protection where necessary.
Certifications
The device is UL recognized for use in control panels.
