PROAIM 37.5" Boom Arm With Rapid Coupler (BP-BA-01)

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed below.

All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher.

Rapid Coupler Assembly

• Loosen the knob of the rapid coupler and rotate it.
• Re-tighten its knob to secure it at the desired position.

Boom Arm Mounting on Hex Mounting Post

• Pull the locking cap of the Hex Stand (Not Included) backward [pull-tab-arrow].
• Then, mount the Boom Arm on the Hex Mounting Post.
• After mounting the Boom Arm, re-tighten the knob to secure it.

NOTE: Compatible with a tripod stand featuring a hex mounting post, the boom arm seamlessly integrates into your existing equipment setup.

Rapid Coupler Rotation

• Loosen the knob of the rapid coupler.
• Now, adjust the position of the boom arm in any direction at your convenience [adjust-direction-arrow].

Feature: The ball-swivel mechanism provides a smooth, quiet, and stable range of motion (360° x 220°), allowing precise positioning for controlled and centered motion.

• Once the Boom Arm is at the desired position, re-tighten its knob to secure it at place.

Length Adjustment of Boom Arm

Top Clutch Adjustment

• Rotate the top clutch of the Boom Arm and loosen it.
• Then, slide the Boom Arm in a forward/backward direction [slide-arrow].
• Re-tighten the clutch to secure the Boom Arm at the desired length.

Bottom Clutch Adjustment

• Rotate the bottom clutch of the Boom Arm and loosen it.
• Then, slide the Boom Arm in a forward/backward direction [slide-arrow].
• Re-tighten the clutch to secure the Boom Arm at the desired length.

Feature: Featuring a 1kg / 2.2 lb counterweight at the end, this boom arm ensures stability, especially when dealing with heavier equipment, providing steady and reliable performance.

Ball Head Mounting

• Pull the locking cap of the Boom Arm's tip backward [pull-tab-arrow] and insert the Ball Head.

Feature: The boom arm's tip has a locking cap that allows for quick attachment or detachment of equipment.

Feature: The ball head at the tip of the Boom Arm supports various thread sizes, including 5/8" for mic mounting.

Converter (5/8-3/4") Mounting

• Now, remove the 5/8" -3/8" converter from the Ball Head.

Feature: It includes converters (5/8" -3/8" & 5/8" -1/4") for attaching a range of equipment, ensuring flexibility in your setup.

• Mount the 5/8"- 3/4" converter onto the Ball Head.

Converter Rotation

• Loosen the Ball Head knob and set the converter at the desired position.

NOTE: Use Knob to set the position of the Blimp.

• Now, set the converter at the desired position.
• Once the converter is at the desired position, re-tighten the knob securely.

Mic Mounting

• Mount the Mic (Not Included) onto the Converter.
• Rotate the mic 360° rotation to tighten it [rotate-arrow].
• The Mic is securely mounted on the converter.
• Your setup is ready to use.

Product Overview & Support

Warranty: PROAIM offers a one-year warranty for its products from the date of purchase. Within this period, PROAIM will repair products without charge for labor or parts. Warranty does not cover transportation costs or damage from misuse or accidental damage. Warranty repairs are subject to inspection and evaluation by PROAIM.

Liability: PROAIM is not liable for damage caused by products not supplied by PROAIM, or from mishandling during transit, accidents, misuse, neglect, lack of care, or service by anyone other than PROAIM's company.

Contact: In case of any dissatisfaction, please contact PROAIM immediately for support.