2010-2011 Subaru Legacy/Outback Audio Installation Guide
About the Vehicle
A photograph showcases a silver 2010-2011 Subaru Legacy sedan, highlighting its exterior design. The Scosche logo is prominently displayed.
| Make | Subaru |
|---|---|
| Model | Legacy/Outback |
| Year | 2010-11 |
Standard/Optional Features
- AM/FM/SAT/MP3/WMA/Single/Multi CD Player
- 3.5mm Aux/mp3 input
- 9 Speaker Harmon Kardon amplified system
Speaker Specifications
Front Speakers
| Location | Size |
|---|---|
| Side Dash | 2 1/2" |
| Lower Door | 6 1/2" |
| Speaker Adapter | TBA |
| Speaker Harness | TBA |
| Speaker Assembly | (2) 10mm / (3) Phillips screws |
Dimensions
| Area | Length | Width | Depth |
|---|---|---|---|
| Dash | 2.87" | 2.87" | 1.59" |
| Door | 6.24" | 6.24" | 2.88" |
Rear Speakers
| Location | Size |
|---|---|
| Lower Door | 6 1/2" |
| Subwoofer | 8" |
| Speaker Adapter | TBA |
| Speaker Harness | TBA |
| Speaker Assembly | (3) Phillips / (5) 10mm screws |
Dimensions
| Area | Length | Width | Depth |
|---|---|---|---|
| Door | 6.24" | 6.24" | 2.51" |
| Sub | 9.07" | 9.07" | 4.08" |
Installation Applications
| Application | Details |
|---|---|
| Dash Type | New Custom Dash |
| Aftermarket Type | Single/Double Din |
| Aftermarket Kit | SU2028B |
| Harness | NN04B/NN04RB |
| Antenna Adapter | NAA2B/NAAR2B |
| BlueFusion/Bluetooth | BT1000/BT1200 |
| AUX Interface | Not required |
| Auxiliary/USB Input | Center Console |
| Amplifier location | Under pass seat |
Factory Speaker Wiring Color Codes
Note: These color codes are specific to the speaker wiring.
| Wire Function | Color Code |
|---|---|
| (+)12v Battery | Green/White |
| (+)12v Accessory | Yellow/Red |
| (-) 12v Ground | Yellow/Black |
| (+)12v Amp Turn On | Green |
| Left Front Speaker (+) | Brown/White |
| Left Front Speaker (-) | White/Black |
| Right Front Speaker (+) | Red/Yellow |
| Right Front Speaker (-) | Black |
| Left Rear Speaker (+) | White/Red |
| Left Rear Speaker (-) | Yellow |
| Right Rear Speaker (+) | Red |
| Right Rear Speaker (-) | Blue |
Vehicle Disassembly Instructions
Preliminary Step
Disconnect the negative battery cable. ⚠️
Radio Removal
The image depicts the car's dashboard with a plastic panel removal tool being used to detach the trim surrounding the factory radio.
- With Panel Removal Tool, Unclip Panel Surrounding Radio and Remove.
- Extract (4) Phillips Head Screws Securing Radio, Unplug and Remove Radio.
AUX/3.5mm Port Access
A view of the Subaru's center console reveals the AUX input port and a 12V power outlet.
No specific disassembly steps are listed for accessing the AUX/3.5mm port itself, but it is visible in the center console.
Front Door Speaker Removal
The image shows a hand holding a car speaker, with the interior of a front door panel partially disassembled to access the speaker mounting area.
- With Panel Removal Tool, Unclip Side Mirror Panel.
- With Flat Head Screw Driver, unclip Screw Cover Inside Door Handle and Extract (1) Phillips Head Screw.
- With Flat Head Screw Driver, unclip Screw Cover Inside Door Grip and Extract (1) Phillips Head Screw.
- With Flat Head Screw Driver, unclip light located on the bottom of the Door panel, unplug and Remove.
- With Panel Removal Tool, unclip Door Panel, unplug and remove.
- Extract (3) Phillips Head Screws Securing Speaker, unplug and Remove.
Rear Door Speaker Removal
The image illustrates the process of removing a speaker from the rear door panel of the Subaru.
- With Flat Head Screw Driver, unclip Screw Cover Inside Door Handle and Extract (1) Phillips Head Screw.
- With Flat Head Screw Driver, unclip Screw Cover Inside Door Grip and Extract (1) Phillips Head Screw.
- With Panel Removal Tool, unclip Door panel, Unplug and Remove.
- Extract (3) Phillips Head Screws Securing Speaker, unplug and Remove.
Subwoofer Removal
The trunk area is shown after the subwoofer has been removed, exposing the mounting location and wiring harness.
- With Panel Removal Tool, unclip (2) plastic screws securing plastic moldings covering back seats locking mechanism, unclip plastic moldings and remove.
- Remove door seal from rear doors, just enough to clear side panels.
- With Panel Removal Tool, unclip top portion of the lower side panels, just enough to clear the top side panels.
- With Panel Removal Tool, unclip upper side panels and remove. Be careful, there's an airbag below these panels.
- With Panel Removal Tool, unclip Rear Deck Panel, unplug and remove.
- Extract (5) 10mm screws securing Subwoofer, unplug and remove.
Amplifier Removal
The amplifier, located beneath the front passenger seat, is shown with its mounting screws and wiring harness accessible.
- Pull Front Passengers seat forward, lift carpet to reveal (2) screws and extract (2) 10mm screws securing Amplifier.
- With Panel Removal Tool, unclip (2) plastic clips securing harness onto the Amplifier's bracket.
- Unplug Amplifier, lift and remove.
General Vehicle Wiring Color Codes
Note: These color codes are for the main vehicle harness and may differ from speaker-specific wiring.
| Wire Function | Color Code |
|---|---|
| +12 Volt Constant | Lt. Green/ Purple |
| +12 Volt Accessory | Pink/ Black |
| Ground | Black/ Lt. Green |
| Illumination | Lt. Blue/ Red |
| Front Left Positive | Orange/ Lt. Green |
| Rear Right Positive | Orange/ Red |
| Rear Right Negative | Brown/ Pink |
Related Documents
 |
Scosche Introduces New Full HD Smart Dash Camera and ProClip Direct-Fit Mounts Scosche Industries announces the launch of its new NEXG10032 Full HD Smart Dash Camera and expanded ProClip Direct-Fit Phone Mount line for various vehicle models, available Spring 2022. |
 |
2011 Chrysler 300 Speaker Installation Guide by Scosche Comprehensive guide for installing Scosche audio components in a 2011 Chrysler 300. Includes vehicle specifications, speaker fitment notes, application details, factory color codes, and step-by-step disassembly instructions for radio, dash, front door, and rear deck speakers. |
 |
2008-12 Honda Accord Speaker Installation Guide | Scosche Detailed guide for installing Scosche speakers in a 2008-12 Honda Accord, including vehicle disassembly steps, speaker notes, and wiring color codes. Learn how to replace your car's audio system with Scosche products. |
 |
Scosche TA2055B Installation Kit for 2006-Up Toyota RAV4 - Stereo Dash Kit Guide Detailed installation instructions for the Scosche TA2055B in-dash stereo installation kit for 2006 and later Toyota RAV4 models. Includes vehicle disassembly and radio mounting steps for single and double DIN units. |
 |
Scosche GM5201AB Installation Manual: 2010-Up Chevrolet Camaro Stereo Upgrade Comprehensive installation guide for the Scosche GM5201AB In-Dash Stereo Installation Kit, designed for 2010-Up Chevrolet Camaro vehicles with touch-screen interfaces. Includes parts list, removal, assembly, wiring, and system setup instructions. |
 |
Scosche MA1532B Installation Kit for 2006-Up Mazda Miata/MX5 Stereo Dash Replacement Detailed installation guide for the Scosche MA1532B dash kit, enabling the replacement of factory stereos in 2006-Up Mazda Miata and MX5 vehicles. Covers vehicle disassembly, A/C control mounting, and single/double DIN radio installation procedures. |
 |
Scosche CR4000SW: Factory Stereo Replacement Interface for Chrysler, Dodge, Jeep Vehicles Upgrade your 2004-up Chrysler, Dodge, or Jeep vehicle's audio system with the Scosche CR4000SW factory stereo replacement interface. This guide details installation, compatibility, and steering wheel control integration for a seamless aftermarket stereo setup. |
 |
Scosche GM3000SW-WM1: GM LAN Stereo Replacement Interface & Steering Wheel Control Retention Install the Scosche GM3000SW-WM1 interface to replace your GM factory stereo while retaining essential safety chimes and steering wheel controls. Compatible with select 2004-up GM vehicles with GM LAN radios. |