Soundcore mini 2 User Manual
Introduction
Welcome to the Soundcore mini 2 user manual. This guide provides comprehensive instructions on how to set up, use, and care for your portable Bluetooth speaker.
Safety Instructions
- Avoid dropping the device.
- Do not disassemble the device.
- Do not submerge the device in water.
- Avoid extreme temperatures.
- Do not use the device outdoors during thunderstorms.
- Use only original or certified cables for charging and connection.
- Do not use any corrosive cleaners or oils to clean the device.
What's Included
- Soundcore mini 2 Speaker
- USB Charging Cable
- User Manual
- Safety & Warranty Card
At a Glance
Diagram showing the Soundcore mini 2 speaker from the front and back. The front view displays the speaker grille at the top, with control buttons arranged below: [Power Button]/[Bluetooth Button], [Volume Down], [Multi-function Button], [Volume Up]. The back view reveals the [Micro USB Port] and the [3.5mm Aux Input]. A numbered list identifies each component:
- 1. [Battery Indicator]
- 2. [Power Switch]
- 3. [Volume - / +] buttons
- 4. [Multi-function Button]
- 5. [Bluetooth Pairing Button]
- 6. [Status Indicator]
- 7. [Microphone]
- 8. [Micro USB Charging Port]
- 9. [3.5mm Aux Input]
Using Your Soundcore mini 2
1. Turn On / Off
Illustration demonstrating how to power the speaker on and off. Pressing the [Power Button] once turns the speaker on, indicated by an audible tone and status light. Pressing and holding the [Power Button] for approximately 2 seconds powers the speaker off.
a. Bluetooth Mode
Steps for establishing a Bluetooth connection: 1. Ensure the speaker is powered on. 2. Press and hold the [Bluetooth Button] (or [Multi-function Button] on some models) until the [Status Indicator] light flashes blue, indicating pairing mode. 3. On your smartphone or other Bluetooth-enabled device, navigate to Bluetooth settings and select 'Soundcore mini 2' from the available devices list. 4. Once successfully connected, the [Status Indicator] light will turn solid blue.
| Indicator Light | Status |
|---|---|
| Flashing blue | Pairing mode |
| Steady blue | Connected to a device |
| Flashing white | True Wireless Stereo pairing mode |
| Steady white | Connected to True Wireless Stereo |
True Wireless Stereo (TWS)
Diagram illustrating the True Wireless Stereo (TWS) connection between two Soundcore mini 2 speakers. One speaker is shown connected to a phone via Bluetooth. The second speaker is wirelessly paired to the first. A text overlay indicates that pressing the [Bluetooth Button] for 3 seconds on one speaker initiates TWS pairing mode.
The True Wireless Stereo (TWS) feature allows you to connect two Soundcore mini 2 speakers together. This creates a wider stereo soundstage, with the left audio channel routed to one speaker and the right channel to the other, enhancing your listening experience.
2. Bluetooth Functions & Call Handling
Icons representing various button functions: [Play/Pause] button for media control, [Volume Down] and [Volume Up] buttons for audio level adjustment, [Next Track] button for skipping songs, [Answer/End Call] button for managing phone calls, and [Voice Assistant] button for activating Siri or other voice assistants.
| Action | Button/Combination |
|---|---|
| Play / Pause music | Press [Multi-function Button] once |
| Volume up / down | Press [Volume Up] or [Volume Down] buttons |
| Next track | Press and hold [Multi-function Button] for 2 seconds |
| Answer / End call | Press [Multi-function Button] once |
| Put current call on hold and answer incoming call | Press and hold [Multi-function Button] for 2 seconds |
| Switch between held call and active call | Press [Multi-function Button] twice quickly |
| Reject incoming call | Press and hold [Multi-function Button] for 2 seconds |
| Transfer call between speaker and mobile phone | Press and hold [Multi-function Button] for 2 seconds during a call |
| Activate Siri / other voice control software | Press [Multi-function Button] twice quickly |
- [On Call] ([Status Indicator] steady blue)
- [Incoming Call] ([Status Indicator] flashing blue)
When the speaker is powered on, it will automatically attempt to connect to the last paired device. If no previous device is found, press the [Bluetooth Button] to enter pairing mode.
b. AUX-In Mode
Diagram illustrating the AUX-In connection. The Soundcore mini 2 speaker is shown with a 3.5mm audio cable plugged into its [3.5mm Aux Input] port. The other end of the audio cable is connected to the headphone jack of a smartphone, tablet, or music player. A note indicates that the AUX cable is sold separately.
Plugging a 3.5mm audio cable into the [3.5mm Aux Input] port will automatically switch the speaker to AUX mode. In AUX mode, audio playback is controlled directly from the connected device. Volume can be adjusted using the speaker's [Volume Up]/[Volume Down] buttons or the controls on the connected device.
Charging Your Soundcore mini 2
Illustration depicting the charging process. The Soundcore mini 2 speaker is shown connected via its [Micro USB Port] to a USB cable. The other end of the USB cable is connected to a power source, such as a wall adapter or a computer's USB port. The [Charging Indicator] light on the speaker is visible.
| Indicator Light | Status |
|---|---|
| Flashing red | [Low Power Indicator] / Battery low |
| Steady red | [Charging Indicator] / In charge |
| Off (when plugged in) | Fully charged |
Use the included USB cable to charge your Soundcore mini 2. Ensure the speaker is fully charged before its first use.
Disconnect the speaker from the charger once it is fully charged. Avoid charging the speaker for extended periods.
When the speaker is not in use, store it in a cool, dry place.
Specifications
Specifications are subject to change without notice.
- Input: 5V ⎓ 1A
- Audio output: 6 W
- Battery capacity: 1850 mAh
- Charging time: 2-3 hours
- Play time (varies by volume level and content): 15 hours
- Size: 69.5 x 69.5 x 80 mm / 2.7 x 2.7 x 3.1 in
- Weight (without packaging): 207g / 7.3 oz
- Bluetooth version: V4.2 + EDR
- Range: 20 m / 66 ft
