FlexiSpot User Manual
Item No. E5-UKV2
New Working New Living
Welcome to your new FlexiSpot standing desk frame. This manual provides essential information for assembly, operation, and maintenance.
Website: flexispot.co.uk
Tel: +44 2039293835 UK
Mail: info@flexispot.co.uk
FLEXISPOT LIMITED, G-PARK UNIT1, MOULTON PARK, SUMMERHOUSE RD, NN3 6WD NORTHAMPTON, UK
Warranty information is available.
Specifications
| Feature | Details |
|---|---|
| Lifting Column | 3 Stage |
| Max. Weight Capacity | 100kg |
| Table Frame Width | 1116/1286/1486mm |
| Max. Speed | 25mm/s |
| Height Adjustment | 600mm-1250mm |
| Adaptable Desktop Size Length | 1200mm-1800mm |
| Adaptable Desktop Size Width | 600mm-800mm |
| Adaptable Desktop Size Thickness | >18mm |
| Standby Power Consumption | <0.5w |
| Standby Period | 1 min |
The product is designed to meet ecodesign requirements for electric power consumption in standby mode. The technical information for standby mode is provided above.
For the English version of the electronic instruction manual, visit: https://flexispot.co.uk/3-stage-desk-frame-e5.html
Power Supply
Manufacturer: Shenzhen Green Power Electronic Technology Co., Ltd.
Model: GRP-60WM290018-A
Rated Input: 100-240VAC, 50/60Hz, 1.5A
Rated Output: 29.0VDC, 1.8A, 52.2W
Average Active Efficiency: ≥88.0%
Efficiency at Low Load (10%): 86.36%
No-load Power Consumption: ≤0.21 W
Diagram of Components
The following components are included in the package:
- 1. Support Plate x 2
- 2. Left Crossbeam x 2
- 3. Right Crossbeam x 2
- 4. Column x 2
- 5. Keypad x 1
- 6. Adaptor x 1
- 7. Feet x 2
- 8. Power cord x1
- 9. Extension cord x1
- 10. Cable Tie x4
- 11. T-Socket Wrench x1
Note: Keypad screws are stored separately.
A visual representation shows all parts laid out, including the two legs (columns), crossbeams, feet, adaptor, keypad, cables, and tools.
Pre-installation Guide
- Install on carpet to prevent scratches.
- A Phillips screwdriver or drill is required (not provided).
- It is recommended to get a friend for help during assembly.
Assembly Instructions
1. Connect the crossbeam
The crossbar is adjustable in three positions. Adjust the crossbar to the appropriate length for your tabletop.
Diagram Description: Three illustrations show the crossbar being extended or retracted to fit different tabletop lengths: 1200mm-1300mm, 1300mm-1500mm, and 1500mm-1800mm. Holes are aligned for screw insertion.
Parts Used: Screws C (x4), D (x4), A (x1), B (x1), T-Socket Wrench (x1).
2. Install the crossbeam
Pre-tighten all screws for mounting the crossbeam and tighten them at the same time.
Diagram Description: The crossbar assembly is shown being attached to the columns. Screws A (x8) and the T-socket wrench (x1) are used. An arrow indicates the frame assembly is turned over after attachment.
Parts Used: Screws A (x8), T-Socket Wrench (x1).
3. Install the feet
Installation with a priority on diagonal screws.
Diagram Description: The feet are shown being attached to the bottom of the columns using screws B (x8) and the T-socket wrench (x1). Diagonal screw placement is highlighted.
Parts Used: Screws B (x8), T-Socket Wrench (x1).
4. Install the support plate
Pre-tighten all screws for mounting the support plate and tighten them at the same time.
Diagram Description: The support plate is shown being attached to the top of the frame using screws E (x4) and the T-socket wrench (x1).
Parts Used: Screws E (x4), T-Socket Wrench (x1).
5. Install the desktop
The sequence for screw installation is as follows:
Diagram Description: Multiple views illustrate attaching the desktop to the frame. For each tabletop size (1200mm-1300mm, 1300mm-1500mm, 1500mm-1800mm), screw hole positions are shown. Dimensions indicate the tabletop length and the maximum distance from the support plate edge (≤200mm).
Warning: Please ensure sufficient strength for your self-supplied table. 100kg is a reference value, but actual use may vary depending on the wood material. The distance from the support plate to the edge of the table plate should not exceed 200mm.
Parts Used: Screws F (x16 for 1200-1300mm, x18 for 1300-1500mm, x20 for 1500-1800mm).
6. Install the keypad
The curved edge of the keypad should be flush with the edge of the desktop.
Diagram Description: The keypad is shown being mounted onto the desktop. An inset highlights aligning the keypad's curved edge with the desktop's edge.
Parts Used: Small screws (x2).
7. Install the adapter
Keep the adapter on the same side as the keypad.
Diagram Description: The power adapter is shown being attached to the underside of the desktop, near the keypad mounting location.
8. Connect cables
If the motor cable can be plugged directly into the keypad, there is no need to connect an extension cable.
Diagram Description: A schematic shows the connections: motor cable connects to the keypad or extension cord, extension cord connects to the adaptor, and the power cord connects to the adaptor. A separate sequence shows the physical connection of these cables. Another diagram illustrates using cable clips to secure and tidy the wiring.
Instruction: Connect the power supply after completing the cable connection.
9. Flip the table
Diagram Description: An illustration shows the assembled desk frame being carefully flipped over onto its feet.
Keypad Instruction
The keypad allows control over the desk's height and memory functions.
Height Memory Function
Saving a Height: When the desk is stationary, press and hold the preset button (e.g., '1', '2', '3', '4') for 3 seconds. The display will show "S-1" (or S-2, S-3, S-4), indicating the position has been saved.
Recalling a Height: At any height, click the desired preset button ('1', '2', '3', or '4'). The desk will automatically adjust to the saved position.
Anti-Collision Sensitivity Adjustment
The desk has an anti-collision function with 4 sensitivity levels (R-0 to R-3).
To adjust: Simultaneously press and hold the "^" and "v" buttons for 5 seconds. Each operation switches to the next level.
- R-0: Anti-collision function is turned off.
- R-1: Low sensitivity.
- R-2: Medium sensitivity.
- R-3: High sensitivity.
When the desk rises or falls and encounters an obstruction, it will rebound to prevent damage.
Reset Function
Reset Method 1: Press and hold the "v" button until the desk lowers to its lowest position. Release the key. Then, press and hold "v" again until the digital display shows the current height. Release to complete the reset.
Reset Method 2: Simultaneously press and hold the "3" and "4" buttons for 3 seconds until the LED display shows "rt". Release the buttons. Then, press and hold "v" until the digital display shows the current height. Release to complete the reset.
Lift System Malfunction Reset: Press and hold the "v" button until the desk lowers to its lowest position. Release the button. Then, press and hold "v" again until the digital display shows the current height. Release to complete the reset.
Code Handling
- General Response Issues: If codes appear or there is no response when pressing a key, ensure the connection cable is not broken. Disconnect power for over 10 seconds, then reconnect. The display may show "AST" or "rst" before reset.
- E01 or E02 Codes: If "E01" or "E02" appear, let the table rest for 18 minutes or more. It should then be ready for normal use.
- Further Assistance: If the table still does not work properly after these steps, please contact customer service.
Resolving Common Issues
This list helps in checking and solving common faults. Please contact the manufacturer if your problem is not listed.
| Fault | Method for Solution |
|---|---|
| Electronic functions are not functioning properly | Check whether the cable connection is normal. |
| Rising at a low speed | Check if overloaded (max loading: 100 kg). |
| Downward sliding | Reset. |
| Frequently reposition | Restart after suspending for 18mins while connecting to power. |
| Only down but not up or only up but not down | Check for obstructions underneath the table or any wire harnesses hanging down. |
| Not enough up&down height | Reset. |
| The bottom cannot rise | Check for obstructions underneath the table or any wire harnesses hanging down. |
| Overwork (Duty cycle: Max 2min on/18min OFF) | Restart after suspending for 18mins while connecting to power. |
| Press the button and the desk goes up instead of down | Check for obstructions underneath the table or any wire harnesses hanging down. |
Attention & Safety Precautions
This list is for checking and solving common faults and errors. Please contact the manufacturer if the problem you encounter is not on this list.
General Safety and Usage:
- Power Supply: AC100V - 240V, frequency 50/60HZ.
- Working Environment: 0 -40°C.
- Cleaning: Unplug the power supply cable before cleaning. Wipe the surface with a slightly damp cloth. Keep all electrical components away from liquids. Do not damage the connection line and keep the plug in a safe position.
- Inspection: Examine the appliance frequently for signs of wear or damage. If such signs appear, or if the appliance has been misused or does not work, contact the supplier.
- Installation: Before using the product, ensure it has been installed correctly.
- Operation: When operating a switch that initiates, maintains, or changes the movement of the furniture, ensure other persons are kept away.
- Placement: Avoid creating entrapment hazards with other furniture.
- Instructions: Read the instructions to fully understand all product functions and settings before use.
- Children: Keep children away from electric height-adjustable desks, control units, and handsets. Manufacturer is not responsible for damages resulting from children's unpredictable behavior.
- Noise: Slight noise caused by the multi-wedge belt or brake system will not impact the use of this product.
- Cleaning Materials: Do not use corrosive or abrasive materials. Dispose of cleaning solutions in an environmentally friendly manner.
- Risks: Understand the risks associated with using this product. Children or those with cognitive impairment should not use this product without supervision.
- Power Cord: If the power supply cord is damaged or broken, it must be replaced by the manufacturer or a relevant specialist to avoid injuries.
- Environment: Please operate in a clean and safe environment. Be careful with packaging materials to avoid potential dangers (e.g., choking risk with plastic bags).
- Usage: The appliance is only to be used with the unit provided. For indoor use only.
- Transportation: If necessary, retain the original package for future transportation.
Recycling and Disposal:
This product cannot be disposed of as household waste. To prevent damage to the environment, this product should be recycled. Please use the relevant recycling systems available or contact the distributor or manufacturer for recycling assistance.
Manufacturer & Importer Information
Manufacturer: Loctek Ergonomic Technology Corp.
Address: 588 Qihang South Road Binhai Industrial Zone, Yinzhou District Ningbo, Zhejiang 315145 P.R. China
Importer: FLEXISPOT LIMITED, G-PARK UNIT1, MOULTON PARK, SUMMERHOUSE RD, NN3 6WD NORTHAMPTON, UK
