Resideo Braukmann F78TS

The Resideo Braukmann F78TS is engineered for installations requiring high water demand, serving large residential buildings, central water supply systems, and commercial or industrial applications. It features an efficient reverse rinsing system to prevent the ingress of foreign particles like rust, sand, and hemp strands, thereby reducing corrosion probability.

Key Features

• LEAD FREE: Pb content < 0.1%
• Filtered water supply during reverse rinsing
• Replaceable filter insert
• Patented fast and thorough reverse rinsing system
• Optional retrofittable automatic reverse rinsing actuator (Z11AS)
• Optional retrofittable differential pressure switch (DDS76)
• Corrosion protection with Polyamide coating
• ACS certified, KTW approved, DM174 conform
• Approvals include DVGW and WRAS

Technical Data

• Media: Drinking water
• Connection Sizes: Flange connection PN16 (DN65-DN100, DN125 with extension flanges)
• Max. Operating Pressure: 1.5 - 16 bar
• Max. Operating Temperature: 30°C (medium per EN 1567), 65°C (max. operating pressure 6 bar)
• Installation Position: Horizontal, filter bowl downwards

Installation Guidelines

Install in horizontal pipework with the filter bowl downwards for optimal efficiency. Ensure shut-off valves are installed and that there is good access for maintenance and reading pressure gauges. Protection against frost is recommended. Installation after the water meter is advised, with a proper wastewater connection.

Ordering Information

Available in sizes DN65, DN80, and DN100 with various filter mesh sizes (20 µm, 50 µm, 100 µm, 200 µm). Accessories like the automatic reverse rinsing actuator (Z11AS) and extension flanges (EXF125-A) are available.

Spare Parts

Replacement parts include filter inserts, replacement sieves, pressure gauges, seal sets, and ball valves, available for various sizes and mesh configurations.