FJÄLLBO Coffee Table

Step 1

Attach the two side frame legs to the lower mesh shelf.

Use four (4) screws (Part #107616).

Step 2

Connect the upper horizontal frame pieces to the side frame legs.

Use eight (8) screws (Part #152526) to secure these connections.

Step 3

Attach the main tabletop to the assembled frame.

Use eight (8) screws (Part #152527) to fasten the tabletop.

Step 4

Carefully place the tabletop onto the frame, ensuring it is aligned correctly.

Assemble on a soft surface to avoid damage.

Step 5

Secure the tabletop to the frame.

Use six (6) screws (Part #152497).

Step 6

Insert the lower mesh shelf into the designated slots within the frame.

Step 7

Fasten the lower mesh shelf.

Use four (4) screws (Part #107616).

Step 8

Attach the small support brackets to the underside of the tabletop frame.

Use four (4) screws (Part #107616) to secure the brackets.

Step 9

Secure the top surface by attaching side brackets to the frame.

Use four (4) screws (Part #107616) and four (4) screws (Part #122158) to connect the brackets to the frame and the tabletop.

Step 10

Adjust the leveling feet at the bottom of each leg to ensure the table is stable and level on your floor.

Turn the feet clockwise or counter-clockwise as needed.