BURVIK Side Table
Product by IKEA
Safety Warnings
- Warning: Delicate table. Do not sit on the product. ?
- Warning: Delicate table. Do not place heavy objects on this product. Maximum load: 10 kg (22 lb). ⚖️ 10kg
Assembly Instructions
Please follow these steps carefully to assemble your BURVIK side table.
Step 1: Attach Legs
Place the tabletop upside down on a soft surface to prevent scratching. Take the four legs, each with a threaded bolt at one end. Align the threaded bolt of each leg with the corresponding threaded insert on the underside of the tabletop. Screw each leg in clockwise until it is firmly attached. Ensure the legs are straight and secure. [Diagram shows legs screwing into the tabletop base. Close-ups illustrate correct screw insertion and an incorrect method with a cross symbol.]
Step 2: Attach Handle/Support
Turn the table upright. Take the curved handle/support piece. Align the ends of the handle with the designated holes or attachment points on the sides of the tabletop. Insert the ends of the handle into these points. You may need to gently push or twist until it clicks or is securely seated. [Diagram shows the curved handle being inserted into the sides of the tabletop.]
[❓]
[?️ Assembly required.]
