Important Safety Information
⚠️ WARNING - Delicate table - Do not sit on the product.
⚠️ WARNING - Delicate table - Do not place heavy objects on this product, maximum load 10 kg (22 lb).
Parts List
| Item | Quantity | Part Numbers | Description |
|---|---|---|---|
| Foot Glides | 8x | 122158, 143131 | Adjustable feet for leveling the tables. |
| Dowels | 30x | 117689, 130610 | Wooden dowels used for joining frame components. |
| Large Allen Screws | 8x | 117689, 130610 | Screws used for frame assembly, requiring an Allen key. |
| Small Pins/Nails | 14x | 107091 | Small pins used for attaching shelves or panels. (Note: Step counts sum to 14x) |
| Medium Phillips Screws | 10x | 123723, 124694 | Screws used for attaching shelves, requiring a Phillips head screwdriver. |
| Allen Key | 1x | 10037615 | Tool provided for tightening Allen screws. |
| Corner Brackets | 4x | 10130559, 10130564 | Metal brackets for reinforcing frame corners. |
Assembly Instructions
Step 1: Assemble Base Frame
Insert two dowels (117689, 130610) into the holes on the bottom of each of the four side frame uprights. Align these uprights with the corresponding holes on the base frame and press them together. This forms the basic structure for one table unit.
Diagram shows four uprights being attached to a base frame using dowels.
Step 2: Attach Corner Brackets (First Side)
Attach two corner brackets (10130559, 10130564) to one of the assembled side frames using two large Allen screws (117689, 130610) per bracket and the Allen key (10037615). Ensure the brackets are oriented correctly to provide support.
Diagram shows attaching brackets to the inside of the frame with screws.
Step 3: Assemble Second Side Frame
Insert four dowels (117689, 130610) into the holes on the bottom of the second side frame upright. Align this upright with the corresponding holes on the base frame and press them together. Repeat for all four uprights to form the second table unit's frame.
Diagram shows attaching uprights to a base frame, similar to Step 1, for the second table unit.
Step 4: Attach Corner Brackets (Second Side)
Attach two corner brackets (10130559, 10130564) to the second assembled side frame using two large Allen screws (117689, 130610) per bracket and the Allen key (10037615). Ensure correct orientation.
Diagram shows attaching brackets to the second frame.
Step 5: Attach Foot Glides
Screw four foot glides (122158, 143131) into the threaded holes at the bottom of the first assembled frame. These allow for leveling the table.
Diagram shows screwing feet into the bottom of the frame.
Step 6: Insert Lower Shelf Support Pins
Insert six small pins (107091) into the designated holes on the inner sides of the frame uprights of the first table unit. These will support the lower shelf.
Diagram shows inserting small pins into the frame uprights.
Step 7: Insert Upper Shelf Support Dowels
Insert four dowels (117689, 130610) into the designated holes on the inner sides of the frame uprights of the first table unit. These will support the upper shelf.
Diagram shows inserting dowels into the frame uprights.
Step 8: Secure Frame with Screws
Tighten the frame structure by inserting and screwing eight large Allen screws (117689, 130610) into the connection points using the Allen key (10037615). This step reinforces the frame.
Diagram shows tightening the frame with Allen screws.
Step 9: Attach Remaining Foot Glides
Screw the remaining four foot glides (122158, 143131) into the threaded holes at the bottom of the second assembled frame.
Diagram shows attaching feet to the second frame.
Step 10: Attach Lower Shelf
Place the lower shelf onto the support pins inserted in Step 6. Secure the shelf by inserting ten medium Phillips head screws (123723, 124694) through the pre-drilled holes on the underside of the shelf into the frame. Use a Phillips head screwdriver.
Diagram shows placing a shelf and securing it with screws.
Step 11: Insert Top Panel Support Pins
Insert eight small pins (107091) into the designated holes on the top of the frame uprights of the second table unit. These will support the top panel.
Diagram shows inserting small pins into the top of the frame uprights.
Step 12: Place and Level Top Panel
Carefully place the top glass panel onto the frame, aligning it with the support pins. Use a spirit level to check if the surface is even. Adjust the foot glides (4x) by screwing them in or out to ensure the table is level.
Diagram shows placing a glass top and using a level. A close-up shows adjusting the foot glides.
Maintenance
ℹ️ Check regularly that all assembly fastenings are properly tightened and retighten when necessary.
