BOYA BY-PM700/700G/700R USB Microphone Instruction Manual

Introduction

Thank you for choosing BOYA! The BOYA BY-PM700/BY-PM700G/BY-PM700R is a USB condenser microphone compatible with Windows and Mac Computers. It offers omni-directional, Cardioid, Stereo, and bi-directional pickup modes, suitable for various situations like recording, interviews, conference calls, vocals, instruments, and podcasting.

This microphone captures audio in up to 16-bit/48 kHz resolution and features gain control, a mute button, and a zero-latency headphone output. Its durable all-metal construction includes a desk stand that allows for adjusting the microphone to various angles, and it can be folded down for storage and transport.

Package Contents

• BY-PM700/BY-PM700G/BY-PM700R Microphone
• Type-C to Type-C Cable
• Type-C to USB-A Cable
• User Manual

Microphone Diagram

Front

1. Tri-Capsule Array
2. Power Indicator
3. Mute Button: Press the mute button; when the LED indicator is red, the muting function is active.
4. Headphone Volume Control
5. Screws
6. Desk Stand

Rear

7. Microphone Gain
8. Stereo Pattern: Picks up sound from the left and right sides, ideal for capturing a realistic, general sound.
9. Omnidirectional Pattern: Picks up sound equally from all directions, capturing a natural blend of voice and ambiance with low sensitivity to wind, handling noise, and vocal plosives.
10. Cardioid Pattern: Maximizes rejection of sound from the sides and rear of the mic, used for capturing full, rich, natural-sounding audio for podcasts, speeches, dialogue, instruments, etc.
11. Bi-directional Pattern: Picks up sound at the front and rear of the microphone, while sounds to the sides are not picked up. Suitable for capturing instruments or recording interviews between two people.

Bottom

12. Type-C Connection
13. Headphone Output
14. 5/8" Screw

Included Cables:

15. Type-C to Type-C Cable
16. Type-C to USB-A Cable

Features

• Compatible with Windows and Mac Computers
• Triple-capsule Design
• Stereo, Cardioid, Omnidirectional, and Bi-directional Polar Patterns
• 16 Bit/48 kHz Resolution
• Muting Function
• 1/8" Headphone Monitoring Jack
• Latency-Free Monitoring
• Desktop Stand
• Durable All Metal Construction
• Type-C to USB-A Cable and Type-C to Type-C Cable Included

Specifications

• Diaphragm: 14 mm (0.55")
• Frequency Response: 20-20,000Hz
• Sensitivity: -45dB±3dB@1KHz
• Power Consumption: 5V/150mA
• Sample Rate: 48 kHz
• Bit Depth: 16 / 24 Bit
• Headphone Amplifier: Impedance: 16ohms, Power output(RMS): 130mW, Frequency Response: 15-20,000Hz
• Connector: Type-C, USB-A
• Cable Length: Type-C: 2m (6.5ft), USB-A: 3m (9.8ft)
• Size: 112 x 108 x 200mm (4.4 x 3.8 x 7.9") (Min) to 112 x 108 x 295mm (4.4 x 3.8 x 11.6") (Max)
• Weight: 1042g (36.8oz)

How to Use

1. Unlock the screws on both sides counterclockwise.
2. Adjust the microphone to your desired angle and tighten the screws to fix it.
3. Connect the microphone to your computer using the supplied cable.
4. Connect your headphones to the BY-PM700/BY-PM700G/BY-PM700R via the 3.5mm headphone output if needed.

Setup for Android Devices

1. Use the supplied Type-C cable to connect the microphone.
2. Plug the Type-C connector into your Android device.
3. The microphone's indicator will stay green when you open a video/recording app from your smartphone.
4. Start recording.

Note: Not all Android devices support external microphones for video recording. You may need to download a third-party app and set the sound source to the external microphone.

Setup for Windows 10

1. Connect the microphone to your computer using a USB port with the supplied Type-C to USB-A cable.
2. Go to "Settings", then choose "Sound".
3. Select "Speaker BY-PM700/BY-PM700G/BY-PM700R" as the Output device.
4. Select "Microphone BY-PM700/BY-PM700G/BY-PM700R" as the Input device.

Setup for Windows 7

1. Connect the microphone to your computer using the supplied Type-C to USB-A cable.
2. From the "Setting Menu", select the "Control Panel".
3. Go to "Control Panel", select "Hardware and Sound".
4. Select "Sound".
5. In the "Sound" window, under the "Playback" menu, select "Speaker BY-PM700/BY-PM700G/BY-PM700R" as the default device.
6. In the "Sound" window, under the "Recording" menu, select "Microphone BY-PM700/BY-PM700G/BY-PM700R" as the default device.

Setup for Apple System

1. Connect the microphone to your computer using the supplied Type-C to USB-A cable.
2. Go to the Apple Icon > System Preferences > Sound Icon.
3. Under the "Input" tab, select "BY-PM700/BY-PM700G/BY-PM700R".
4. Under the "Output" tab, select "BY-PM700/BY-PM700G/BY-PM700R".

Important Information

• If you do not intend to use the microphone for an extended period, please disconnect the cable.
• Avoid touching the microphone while recording, as this can cause unwanted noise.
• Do not place the microphone near high-voltage equipment or devices emitting strong electromagnetic fields, as this may result in recorded noise.
• Do not use or store the microphone in hot or humid conditions.

Maintenance

• Do not operate the device with wet hands or feet.
• Clean the equipment only as described in these instructions.

Manufacturer Information

SHENZHEN JIAYZ PHOTO INDUSTRIAL., LTD.

The BOYA logo is a trademark registered and owned by Shenzhen Jiayz Photo Industrial., Ltd.

Address: A16

TEL: 400 6131096

Email: sales@boya-mic.com

Website: www.boya-mic.com / www.jiayz.com

Product Details

• Product Name: BY-PM700/700G/700R USB Microphone
• Model Number: BY-PM700/700G/700R
• Part Number: 1F0300300330
• Material: 80g writing paper, velvet
• Size: 120x200 mm
• Scale: 1:1
• Unit: mm
• Design Date: 2020-12-18
• Version: V00