HiBoost C30G-5S-BTW Signal Booster FCC ID Label and Regulatory Information

Product Identification

This document provides information regarding the FCC ID labels for various models of HiBoost signal boosters manufactured by Shenzhen Accurate Technology Co., Ltd. (also known as Shenzhen Huaptec Co., Ltd.).

Key Product Details:

• Brand: HiBoost
• Product Type: Cell Phone Booster / Signal Booster
• Packaging Features: 3-Year Warranty ?️, 30-Day Money Back Guarantee ?, Online Support ?
• Packaging Mentions: TRAVEL 3.0 RV CELL PHONE BOOSTER, Upgraded Version, 500 Max Gain, Remote Monitoring, Work with All US Carriers, COMPATIBLE 5G

Model and Identification Numbers

The following models are identified:

• Model: C30G-5S-BTW
• Item No.: S21305000002
• S/N: C30G5S230220001
• IC: 10527A-C230505S
• FCC ID: OWWC230505S

Additionally, variations include:

• Model: C30G-5S-BTW.RV
• Item No.: S21305000003
• S/N: C30G5SRV230220001
• IC: 10527A-C230505S
• FCC ID: OWWC230505S

And:

• Model: C30G-5S-BTW.TRUCK
• Item No.: S21305000001
• S/N: C30G5STR230220001
• IC: 10527A-C230505S
• FCC ID: OWWC230505S

Note: Some OCR results showed slight variations in IC and FCC IDs, but the primary ones are listed above.

FCC ID Label Description and Location

The FCC ID label is designed to be permanently affixed at a conspicuous location on the device, ensuring it is readily visible to the user at the time of purchase. The label typically includes the following information:

• Model Number
• Item Number
• Serial Number (S/N)
• Industry Canada (IC) Certification Number
• Federal Communications Commission (FCC) ID
• "Made in China"

An illustrative image shows an arrow pointing to the location of this label on the device.

Regulatory Compliance Information

This section details important consumer and regulatory information:

English Version:

This is a CONSUMER device. BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider's consent. Most wireless providers consent to the use of signal boosters. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider. In Canada, BEFORE USE you must meet all requirements set out in ISED CPC-2-1-05. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person. You MUST cease operating this device immediately if requested by the FCC (or ISED in Canada) or a licensed wireless service provider. WARNING: E911 location information may not be provided or may be inaccurate for calls served by using this device.

French Version:

Ce produit est un appareil de CONSOMMATION. AVANT DE L'UTILISER, vous DEVEZ conformer à toutes les exigences établies dans la CPC-2-1-05. Vous DEVEZ utiliser cet appareil avec des antennes et des câbles approuvés, conformément aux indications du fabricant. Les antennes DOIVENT être installées à au moins 20 cm d'une personne. Vous DEVEZ cesser d'utiliser cet appareil immédiatement à la demande d'ISDE ou d'un fournisseur de services sans fil autorisé. AVERTISSEMENT: Les renseignements relatifs à l'emplacement du service E911 pourraient être non fournis ou inexacts pour les appels effectués au moyen de cet appareil.