Brookstone FlightForce™ Expedition Drone

Warnings and Cautions

CAUTION

• To reduce the risk of electric shock, do not remove the cover. There are no serviceable parts inside.
• To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture.

The lightning flash with arrow-head symbol ⚡️ within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the unit's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point ❗ within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit.

IMPORTANT SAFETY INSTRUCTIONS

All of the safety and operating instructions should be read, adhered to and followed before the unit is operated.

DRONE WARNINGS:

1. The Drone is designed for INDOOR or OUTDOOR flight.
2. The Drone's blades revolve at high speeds and can cause damage to the user, spectators and animals. Stand away from the Drone to reduce the risk of getting into the flight path and always maintain visual contact with the Drone while flying.
3. Warn spectators that you will be flying your Drone so that they are aware of its position.
4. Before flight, inspect the rotor blades to make certain that the blades are securely fastened to the Drone.
5. Before flying, check your local laws and regulations pertaining to drone usage.
6. It is recommended to operate the Drone in a wide-open space. The ideal space should have a 200-foot radius.
7. Parental guidance or adult supervision is suggested at all times.
8. If you are flying the Drone with others, make sure all spectators are behind you.
9. For best performance, it is recommended that you operate the Drone in zero wind conditions, as wind can greatly affect the performance of the aircraft.
10. Record responsibly. Respect the privacy of individuals when recording video or taking photos with the Drone.
11. Obtain permission from individuals before circulating videos or photos taken with the Drone.

CAUTION: DO NOT ATTEMPT TO FLY THE DRONE IF THERE IS RAIN, SNOW, HEAVY WINDS, THUNDER OR LIGHTNING OUTDOORS. IT COULD DAMAGE YOUR PRODUCT AND MAY CAUSE BODILY HARM.

WARNING

DO NOT FLY THE DRONE IN FOUL WEATHER!

[snow with cross] [rain with cross] [wind with cross] [lightning with cross]

WARNING!

• Choking/Cutting Hazard. Small Parts/Sharp Rotor Blades.
• Keep hands, hair and loose clothing away from the propeller when the power switch is turned to the ON position.
• Not suitable for children under 14 years old. Parental supervision recommended when flying the Drone.

WARNING!

CHOKING HAZARD - Small parts. Not suitable for children under 3 years.

BATTERY WARNINGS

RECHARGEABLE BATTERY (DRONE):

This device contains a removable Lithium-Polymer battery. The included charger is built specifically for the Expedition Drone Li-Poly battery. Do not use it to charge any other battery. The battery must be recycled or disposed of properly. Contact your local waste management office for information on battery recycling or disposal.

[battery certification symbol]

DANGER

To reduce the risk of electric shock, burns, fire or injury:

1. Do not use while bathing or in a shower.
2. Do not place or store unit where it can fall or be pulled into a tub or sink.
3. Do not place in, drop or submerge in water or other liquid.
4. Do not reach for a unit that has fallen into water. Unplug it immediately.
5. Care should be taken so that objects do not fall and liquids are not spilled onto the unit.

WARNING

1. Close supervision is necessary when this appliance/product is used by or near children or mentally disabled individuals.
2. Use this unit only for its intended use as described in this manual.
3. Unplug this unit during lightning storms or when unused for long periods of time.
4. Never drop or insert an object into any opening.
5. Protect the power cord from being walked on or pinched, particularly at plug outlets, convenience receptacles and the point where it exits the unit.
6. Do not allow cord to touch hot surfaces. Wrap cord loosely around the unit when storing.
7. The unit should be situated away from direct sunlight or heat sources such as radiators, electric heaters, heat registers, stoves, or other units (including amplifiers) that produce heat. Avoid placing on top of stereo equipment that radiates heat.
8. Never block the air openings of the unit with materials such as clothing, plastic bags or papers, or place it on a soft surface such as a bed or couch, where the air openings may be blocked.
9. Do not overload the electrical outlet. Use only the power source as indicated.
10. Do not carry this unit by its cord or use the cord as a handle.
11. Never operate this unit if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged, or dropped into water. If the unit's power supply cord or plug is damaged, do not attempt to fix it yourself.
12. To avoid the risk of electric shock, do not disassemble or attempt to repair the unit. Incorrect repair can cause risk of electric shock or injury to persons when the unit is used.
13. Do not operate in the presence of explosive and/or flammable fumes.
14. Never remove the plug from the outlet by pulling the power cord.

FCC INFORMATION

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This equipment may not cause harmful interference.
2. This equipment must accept any interference received, including interference that may cause undesired operation.

Modifications not authorized by the manufacturer may void the user's authority to operate this device.

LOCATION OF PARTS AND CONTROLS

Drone Components:

A diagram shows the drone with the following labeled parts:

• Propeller
• Carbon Ballast
• Foam
• Propeller Gear
• Battery
• HD Camera
• Landing Skid

Remote Control Interface:

A diagram displays the smartphone interface for controlling the drone, showing:

• Top Icons: Home [house icon], Rotate [circular arrow icon], Speed [speedometer icon], G sensor [G icon], Photo [camera icon], Video [video camera icon].
• Left Side Controls: Engine/Throttle (up/down movement), Roll Trimmer.
• Right Side Controls: Direction/Pitch (left/right/up/down movement), Yaw Trimmer.
• Center Controls: ON button, One key quick stop [lock icon].

MOBILE WI-FI CONTROL OPERATING INSTRUCTIONS

1. Go to the iTunes® App StoreSM (for Apple devices) or Google Play™ (for Android devices) and download the Expedition App.
2. Turn on the drone. The indicator light will be flashing, which means the drone is waiting for a connection signal from your mobile phone.
3. In your mobile phone's settings, turn on Wi-Fi, search for "Expedition_XXX", and connect. After a successful connection, the drone's red light will be solid.
4. Open the Expedition App on your device.
5. Touch "CONTROLS," then push the engine (on the left side of the screen) up and down to establish the connection with the mobile device.

CHARGING DRONE BATTERIES

USE THE WALL CHARGER TO CHARGE THE DRONE BATTERY.

A diagram shows the 3.7V 500mAh Li-po Battery and its charging cable.

Please use the included charger to charge the battery. Connect the battery plug into the charger.

CAUTION

Charger Specifications

BATTERY AND CHARGER SPECIFICATION

Battery usage and charge duration reference

GETTING READY TO TAKE OFF

Step 1

A diagram shows inserting the Li-Polymer Battery (3.7V 500mAh) into the drone.

Insert the battery into the drone, and plug the battery wire into the drone. When the two indicator lights are flashing, put the drone flat on the ground on a flat surface.

Step 2

Open the App and switch the button to ON. The drone is ready to fly.

Important:

Make sure the drone is placed on a flat surface. After connecting, the gyroscope will need to be calibrated before take off.

CALIBRATION INSTRUCTION

A diagram shows the remote control interface used for calibration.

Steps:

1. Make sure the drone is placed on a flat surface.
2. After connecting, pull the two rockers (on the App) to the lower right corner for 2-3 seconds for calibration.
3. When calibrated, the flashing LED light will become solid.

BASIC MANUEVERS AND PRACTICE EXERCISES

PLEASE PRACTICE AND LEARN CONTROLS BEFORE ACTUAL FLYING

Please be familiar with the unit before you fly it. Read the instructions carefully, get familiar with all controls, and keep repeating until you are confident with these controls.

1. Place the drone in a clear open space with the tail of drone pointing to you.
2. Practice operating the control sticks (as shown below). Repeat practicing “Throttle High/Low,” “Turn Left/Right,” “Forward/Backward,” and “Move Left/Right.”
3. This simulation flight practice is very important; please keep practicing until you are comfortable with these controls.

Control Movements:

Diagrams illustrate drone movements and corresponding app controls:

• Direction: Left/Right movement controlled by the right joystick. Drone moves left/right.
• Elevator: Up/Down movement controlled by the right joystick. Drone flies forward/backward.
• Throttle: Up/Down movement controlled by the left joystick. Drone ascends/descends.
• Rudder: Left/Right movement controlled by the left joystick. Drone turns left/right.

THROTTLE CONTROL PRACTICE

1. Move the throttle (on the left side of the screen) to the middle to lift the drone a few feet off the ground. Lower the throttle to slowly land the drone again. Repeat until you are comfortable with this action.
2. To practice hovering flight, try to keep the drone steady just 2-3 feet off the ground.

DIRECTION CONTROL PRACTICE

Practice flying forward and back using the directional control panel (on the right side of the screen). Keep a low height and practice moving a few feet in each direction.

❗ If the drone flies away, please lower the throttle stick (on left) to land the drone.

RUDDER CONTROL PRACTICE

1. Slowly raise the throttle stick.
2. Move the nose of the drone right or left. Then slowly move the rudder stick in the opposite direction to fly back to the original position.

PRECISION CONTROL PRACTICE

Once you are familiar with all actions from the above exercises, practice within a circle to improve your accuracy. Reduce the size of the circle as you become more familiar with the controls.

DIRECTIONAL CHANGE AND HOVERING PRACTICE

Once you are familiar with the above exercises, stand by the drone and continue practicing. Then repeat the exercises by standing in front of the drone.

CORRECTING FLIGHT USING PRE-PROGRAMMED MOVEMENTS

Slowly raise the throttle stick as the drone lifts off the ground. You can use the pre-programmed movements to correct the actions. These controls are the slider bars next to the throttle and directional control pads.

1. Correcting using Rotational movement: As the drone lifts off, the nose may lean left or right. When the drone leans right, adjust the trim to the left side. When the drone leans left, adjust the trim to the right side.
2. Correcting using Forward/Backward Tilt movement: As the drone lifts off, the nose may lean forward or backward. When the drone leans forward, adjust the tilt back. When the drone leans backward, adjust the tilt forward.
3. Correcting using Side Step Movement: As the drone lifts off, if the unit may shift left or right. When the drone shifts right, side step to the left side. When the drone shifts left, side step to the right side.

Diagrams illustrate these corrections with corresponding drone movements (Turn right, Turn left, Fly forward, Fly backward, Move left, Move right).

REPLACING THE PROPELLER BLADES

The Expedition Drone's propeller system is a precision instrument that may need repair or replacement for optimal flight function. Crash landing from high-speed aerial flights may cause damage to your Expedition Drone's propellers.

1. Before making any repairs, turn off the power and disconnect the battery.
2. The Expedition Drone has four blades labeled with an embossed A or B, two green propellers on front, and two black propellers on the rear.
3. When replacing the propeller blades, remove the blade from the rotor shaft with a screwdriver (not included). Make sure to match the indication letter and color.
4. Push the gear up to its fully installed position prior to securing the screw in the new propeller.
5. Replace the damaged blade with the new blade.

CARE AND MAINTENANCE

• Always disconnect the battery from the drone when it will not be used for an extended period of time.
• To clean, gently wipe the drone with a clean damp cloth.
• Parental guidance recommended when installing or replacing the batteries.

EXPEDITION DRONE SPECIFICATIONS

• Li-Poly Rechargeable Battery: 3.7V, 500mAh
• Flight speeds: 3
• Flying range: up to 196 feet (60 meters)
• Flight time between charges: 8 minutes
• Power type: USB rechargeable (includes cable)
• Includes 8 spare blades
• Dimensions: 11.4 x 11.4 in (29 x 29 cm), 4.1 oz (116g)

TROUBLESHOOTING

ONE(1) YEAR LIMITED WARRANTY

Brookstone® warrants this product against defects in materials and/or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser ("Warranty Period"). If a defect arises and a valid claim is received within the Warranty Period, at its option, Brookstone will either 1) repair the defect at no charge, using new or refurbished replacement parts, or 2) replace the product with a new product that is at least functionally equivalent to the original product, or 3) provide a store credit in the amount of the purchase price of the original product. A replacement product or part, including a user-installable part installed in accordance with instructions provided by Brookstone, assumes the remaining warranty of the original product. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes Brookstone's property. When a store credit is given, the original product must be returned to Brookstone and becomes Brookstone's property.

Obtaining Service:

To obtain warranty service, call Brookstone Limited Warranty Service at 1-800-292-9819. Please be prepared to describe the product that needs service and the nature of the problem. A purchase receipt is required. All repairs and replacements must be authorized in advance. Service options, parts availability and response times will vary. You are responsible for delivery and the cost of delivery of the product or any parts to the authorized service center for replacement, per our instructions.

Limits and Exclusions:

Coverage under this Limited Warranty is limited to the United States of America, including the District of Columbia and the U.S. Territories of Guam, Puerto Rico, and the U.S. Virgin Islands. This Limited Warranty applies only to products manufactured for Brookstone that can be identified by the "Brookstone" trademark, trade name, or logo affixed to them or their packaging. The Limited Warranty does not apply to any non-Brookstone products. Manufacturers or suppliers other than Brookstone may provide their own warranties to the purchaser, but Brookstone, in so far as permitted by law, provides these products "as is." This warranty does not apply to: a) damage caused by failure to follow instructions relating to product's use or the installation of components; b) damage caused by accident, abuse, misuse, fire, floods, earthquake or other external causes; c) damage caused by service performed by anyone who is not a representative of Brookstone; d) accessories used in conjunction with a covered product; e) a product or part that has been modified to alter functionality or capability; f) items intended to be periodically replaced by the purchaser during the normal life of the product including, without limitation, batteries or light bulbs; g) any product sold "as is" including, without limitation, floor demonstration models and refurbished items; or h) a product that is used commercially or for a commercial purpose.

BROOKSTONE SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. TO THE EXTENT PERMITTED BY APPLICABLE LAW, BROOKSTONE DISCLAIMS ANY AND ALL STATUTORY OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS. IF BROOKSTONE CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES, THEN TO THE EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS EXPRESS WARRANTY.

Some states disallow the exclusion or limitation of incidental or consequential damages or how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.

Contact Information

Find thousands more great ideas online

Brookstone®

317881

Merrimack, New Hampshire, USA 03054 • 800-846-3000 • Brookstone.com