Dyson Supersonic™ User Manual

In the box

The Dyson Supersonic™ hair dryer comes with several magnetic styling attachments for easy fitting and rotation during styling. Heat Shield technology keeps the surface of your styling attachments cool.

Included Attachments:

• Styling concentrator: Wider and thinner for precision styling.
  [Description: Attachment with a flattened, flared nozzle.]
• Gentle air attachment: Cooler, gentle drying for fine hair and delicate scalps.
  [Description: A flat nozzle with a rippled texture.]
• Diffuser: Even diffusion to help define curls and reduce frizz.
  [Description: A large, wide, circular nozzle with prongs on the inner surface.]
• Wide-tooth comb: Engineered for curly and coily hair. Lengthen hair completely, or tease out curls just a little bit.
  [Description: An attachment with long straight comb prongs.]
• Flyaway attachment: For a smoother finish. Attracts longer hairs and hides flyaways, using the Coanda effect.
  [Description: A flat, hook-shaped nozzle.]

Some attachments may not be included. You can buy additional attachments at www.dyson.com.

Getting started

Airflow control: 3 precise settings. The airflow control button is located on the back, left hand side of the cylindrical head of the hair dryer.

Power on/off: Sliding switch. The power button is located on the back, at the top of the handle. It is a slider button that pushes upwards and downwards.

Cold shot: Press and hold to deactivate heat and set style. The cold shot button is located on the back of the handle of the hair dryer, just below the power button.

Air inlet: The air inlet is covered by the filter and is located at the bottom of the handle.

Temperature control: 4 precise heat settings. The temperature control button is located on the back, right hand side of the cylindrical head of the hair dryer.

Removable filter cage: Easy to remove for cleaning. The filter cage is located at the bottom of the handle.

LEDs

The LED lights indicate which settings you are using.

Flow Settings:

• Three white LEDs illuminated: Fast airflow
• Two white LEDs illuminated: Medium airflow
• One white LED illuminated: Gentle airflow

Temperature Settings:

• Three red LEDs illuminated: High heat
• Two red LEDs illuminated: Medium heat
• One red LED illuminated: Low heat
• No red LED illuminated: Cool setting

Diagnostics:

The LEDs will flash continuously to let you know that your machine needs attention.

• Cleaning Filter: Three flashing white LEDs. Follow the instructions or watch the video at dyson.com/yoursupersonic.
• Fault: Three flashing red LEDs. If all three red lights continue to flash, contact the Dyson Helpline. Don't turn back on.

Using your hair dryer

Your Dyson Supersonic™ hair dryer has magnetic styling attachments, for easy fitting and rotation during styling. Remove your attachments using the cool edges.

Styling concentrator: Wider and thinner for precision styling. [Description: Attachment with a flattened, flared nozzle.]

Diffuser: Even diffusion to help define curls and reduce frizz. [Description: A large, wide, circular nozzle with prongs on the inner surface.]

Gentle air attachment: Cooler, gentle drying for fine hair and delicate scalps. [Description: A flat nozzle with a rippled texture.]

Wide-tooth comb: Engineered for curly and coily hair. Lengthen hair completely, or tease out curls just a little bit. [Description: An attachment with long straight comb prongs.]

Flyaway attachment: For a smoother finish. Attracts longer hairs and hides flyaways, using the Coanda effect. [Description: A flat, hook-shaped nozzle.]

Regular filter cleaning

Check your filter is clear from hair product residue and debris monthly, or when the LED lights alert you.

Maintaining performance:

Unplug your machine from the mains electricity supply and allow to cool down before cleaning your filter. The Dyson Supersonic™ hair dryer has highly tuned technology to give outstanding performance. This technology needs to be kept free from dust and hair product residue. Maintenance is required to maintain performance.

Cleaning Steps:

1. Hold the handle of your machine firmly and gently rotate the filter cage anti-clockwise.
2. Pull down and away from the machine. Use a lint-free cloth or soft brush to remove any dust or debris from both the filter cage and the filter mesh.
3. Don't use water to clean the filter mesh. Don't apply too much pressure to the filter mesh.
4. Rotate the filter cage back into position until correctly aligned. Rotate clockwise to lock before use.