Dyson Supersonic r™ Professional Hair Dryer
User Manual
In the box
The Dyson Supersonic r™ Professional hair dryer is Dyson's lightest and most precise hair dryer, engineered for professional stylists, with five Intelligent attachments.
Additional attachments can be purchased at www.dyson.com.
- Powerful air attachment
- Pro concentrator
- Diffuser
- Wide-tooth comb attachment
- Flyaway attachment
Functions
Power on/off: Button to control the device power.
Airflow speed: Three speed settings indicated by LEDs.
Temperature control: Four precise temperature settings, including a cold shot button to lock styles for longer. LEDs indicate the temperature settings.
Filter clean LED: Flashes when the filter needs cleaning.
Getting started
- Remove machine from box.
- Plug in your machine. Important: You must fit an attachment before switching on the machine for your hair dryer to work.
Attachment Descriptions:
- Powerful air attachment: Produces high-velocity airflow to dry hair fast.
- Pro concentrator: Focuses air precisely where you need it.
- Wide-tooth comb attachment: Engineered to de-tangle and lengthen hair as it dries.
- Diffuser: Helps reduce frizz and define curls, coils, and waves.
- Flyaway attachment: Attracts longer hairs and hides flyaways on finished styles, using the Coanda effect.
Using your hair dryer
Settings
Intelligent attachments are preset with optimal airflow and temperature ranging, and recognise your last-used setting with Attachment learning.
Airflow Settings:
| LED Indicator | Setting |
|---|---|
| ○ ○ ○ | Fast |
| ● ○ ○ | Medium |
| ● ● ○ | Gentle |
Temperature Settings:
| LED Indicator | Setting |
|---|---|
| ● ● ● | High |
| ● ● ○ | Medium |
| ● ○ ○ | Low |
| ○ ○ ○ (Blue LED) | Cool |
Diagnostics
- Yellow flashing LED: Your filter needs cleaning.
- White flashing LED: Your filter is either absent or not fitted properly. Ensure the filter is fitted correctly for your hair dryer to work.
- White-blue LEDs flashing: There is no attachment fitted. Your machine will not work without an attachment.
- All three white LEDs flashing: Press the on/off button to clear an error.
- All three red LEDs flashing: Switch off your machine, switch off the mains plug and unplug your plug from the socket. Then, insert the plug back in the socket, switch the mains plug on and turn your machine back on.
- All of the white and red LEDs flashing together: Contact Dyson at business@dyson.co.uk or call 0800-345-7788.
For more information on cleaning your filter, visit https://www.dyson.co.uk/support/hair-care/hair-dryers.
Taking care of your machine
Cleaning your filter
To maintain optimal performance, clean your filter when prompted by the yellow flashing LED light, or if you feel reduced airflow. A white light flashes when the filter is absent. Regular filter maintenance is recommended.
- Unplug your machine from the mains electricity supply and allow it to cool before cleaning your filter.
- Remove the filter cage by sliding down the power cord and opening at the split line.
- Slide the two filter pieces away to separate them.
- Wipe away any loose, large debris such as hair strands or large dust particles from the filter cage.
- Rinse the two filter parts under a warm running tap.
- Using a pea-sized amount of clarifying shampoo, lightly scrub the exterior of the inner filter cage in small, circular motions. Then, lightly scrub the interior of the inner filter cage with up and down motions before rinsing.
- Hold up to the light to ensure there is no remaining debris or dirt.
- Using a pinching motion, gently squeeze dry the inner filter cage with a dry paper towel.
- Allow both filters to fully dry before proceeding.
- Slide the inner filter back into the cage, then open at the split line and replace back onto the machine to click into place.
Note: If the white LED is flashing, your filter is either absent or not fitted properly. Ensure the filter is fitted correctly for your hair dryer to work.
To watch how to clean and maintain your machine, visit https://www.dyson.co.uk/support/hair-care/hair-dryers.
