Dyson Supersonic Nural User Manual

Contents

• In the box
• Getting started
• Nural™ sensors
• Capsule illumination
• Styling attachments
• LEDs
• Regular filter cleaning

In the box

The box contains the Dyson Supersonic Nural™ hair dryer and the following styling attachments:

• Gentle air attachment: Flat nozzle with a rippled texture.
• Styling concentrator: Flattened, flared nozzle for precision styling.
• Wide-tooth comb: Comb attachment with long, widely-spaced tines.
• Wave+Curl diffuser: Domed attachment with removable prong bed.
• Flyaway attachment: Flat, curved nozzle.

Dyson Supersonic Nural™ hair dryer:

Back view of the Dyson Supersonic Nural™ hair dryer. Starting at the head of the machine, the Scalp protect button is at the top, the airflow button is on the left, and the temperature button is on the right. The handle has power and Cold shot buttons at the top, and the filter cage at the bottom.

Getting started

Scalp protect mode on/off: Scalp care is activated by default on first use. The Scalp protect button is on the back, at the top of the cylindrical head of the hair dryer.

Capsule: Home to the Time of Flight sensor, Hall sensor and Capsule illumination. The capsule is suspended in the middle of the hair dryer's central bore.

Airflow control: 3 precise settings: Fast/High, Gentle/Medium, Mild/Low. The airflow control button is on the back left-hand side of the cylindrical head of the hair dryer.

Power on/off: Sliding switch. The power button is on the back, at the top of the handle. It is a slider button that pushes upwards or downwards.

Cold shot: Press and hold to deactivate heat and set style. The Cold shot button is on the back of the handle of the hair dryer, just below the power button.

Temperature control: 4 precise heat settings. The temperature control button is on the back right-hand side of the cylindrical head of the hair dryer.

Air inlet: The air inlet is covered by the filter and is at the bottom of the handle.

Removable filter cage: Easy to remove for cleaning. The filter cage is at the bottom of the handle.

LEDs: The LED lights are on the back of the cylindrical head of the hair dryer. They are above the airflow and temperature buttons. There are three LED lights on each side, which light up as the corresponding button is pressed. These lights also indicate when your filter needs cleaning or if there is a fault.

Nural™ sensors

A network of Nural™ sensors helps the Dyson Supersonic Nural™ hair dryer enhance and optimise your hair care routine.

Scalp protect mode: A Time of Flight sensor measures distance, automatically reducing heat as it moves closer to your hair. To maintain a comfortable, consistent scalp temperature.

Pause detect: A motion-sensing accelerometer knows when it's put down, automatically deactivating the heater, and decreasing airflow and noise. Capsule illumination will pulse blue. Heat is off, airflow is minimal, and Capsule illumination is blue.

Attachment learning: A Hall sensor recognises which styling attachment is connected, automatically switching to its last-used settings.

Capsule illumination: The suspended capsule changes colour to show the current heat setting. Heat, and colour, will auto-adapt in Scalp protect mode.

LED colour guide:

• High heat: Red
• Medium heat: Orange
• Low heat: Yellow
• No heat: Blue

The capsule is suspended in the central bore of the hair dryer. LED lights in the capsule glow red to indicate high heat, orange for medium heat, yellow for low heat, and blue for no heat.

Styling attachments

Attachment learning recognises your intelligent attachments and learns your go-to styling preferences for each. All attachments are magnetic, for easy rotation and fitting. Heat Shield technology keeps the surface of your styling attachments cool. Remove your attachments using the cool edges.

LEDs

The LED lights indicate which settings you are using.

Airflow

• Three white LEDs illuminated: Fast/High
• Two white LEDs illuminated: Gentle/Medium
• One white LED illuminated: Mild/Low

Temperature

Maximum operating temperature in normal working conditions: 105°C. Maximum thermistor temperature at safety shut down: 145°C.

• Three red LEDs illuminated: High
• Two red LEDs illuminated: Medium
• One red LED illuminated: Low
• No red LED illuminated: Cool

Diagnostics

The LEDs will flash continuously to let you know that your machine needs attention.

• Three flashing white LEDs: Clean the filter. Follow the instructions or watch the video at dyson.com/yoursupersonicnural.
• Three flashing red LEDs: If all three red lights continue to flash, contact the Dyson Helpline. Don't turn back on.

Regular filter cleaning

Check your filter is clear of debris and hair product residue every month, or when the LED lights alert you.

Maintaining performance: Unplug your machine from the mains electricity supply and allow it to cool down before cleaning your filter. The Dyson Supersonic Nural™ hair dryer has highly tuned technology to give outstanding performance. This technology needs to be kept free from debris and hair product residue. Regular maintenance is required to maintain performance.

Step 1: Hold the handle of your machine firmly and gently rotate the filter cage anti-clockwise.

Step 2: Pull down and away from the machine. Use a lint-free cloth or soft brush to remove any dust or debris from both the filter cage and the filter mesh.

Step 3: Do not use water to clean the filter mesh and avoid applying too much pressure.

Step 4: Rotate the filter cage back into position until correctly aligned. Rotate clockwise to lock before use.