EPOMAKER GALAXY65

Product Overview

The EPOMAKER GALAXY65 is a 65% layout mechanical keyboard featuring a ball-catch anodized aluminum construction. It offers hot-swappable switches, supporting both 3-pin and 5-pin mechanical switches. Connectivity options include wired USB-C, Bluetooth 5.0, and 2.4GHz wireless. The keyboard includes a rotary knob and customizable RGB backlighting.

Specifications

Function Key Combinations

The keyboard features various function key combinations for enhanced control:

• FN + SPACE: Reset the keyboard
• FN + ESC: -
• FN + Q: Hold to pair Bluetooth device 1; Press to toggle to Bluetooth device 1
• FN + SHIFT + ESC: -
• FN + W: Hold to pair Bluetooth device 2; Press to toggle to Bluetooth device 2
• FN + 1: Print
• FN + E: Hold to pair Bluetooth device 3; Press to toggle to Bluetooth device 3
• FN + O: Scroll
• FN + R: Hold to rematch the 2.4G receiver
• FN + P: Print Screen (Prtsc)
• FN + BACKSPACE: Battery Check
• FN + J: Insert (Ins)
• FN + WIN: Lock/Unlock Windows Key
• FN + K: Home
• FN + L_CTRL: Toggle Num row to Function row
• FN + L: End

Light Effects

Control the keyboard's lighting effects:

• FN + PGUP: Turn On/Off Backlight Effect
• FN + ENTER: Toggle Backlight Effect
• FN + ]: Backlight Hue +
• FN + [: Backlight Hue -
• FN + ↑: Backlight Brightness +
• FN + ←: Backlight Effect Speed -
• FN + ↓: Backlight Brightness -
• FN + →: Backlight Effect Speed +

Connectivity Modes

Pairing Bluetooth

1. Toggle the switch to the BT side.
2. Hold FN+Q/W/E until the light indicator flashes quickly to pair.
3. Open Bluetooth settings on your device and find "Galaxy65-1", "Galaxy65-2", or "Galaxy65-3" to connect.
4. The indicator light will stop flashing and return to the current backlight effect when connected.
5. Short press FN+Q/W/E to toggle between Bluetooth devices 1/2/3.

Pairing 2.4G Wireless

1. Toggle the switch to the 2.4G side.
2. The "R" key will light up and blink slowly when in 2.4G mode.
3. Insert the 2.4G receiver into your device.
4. The indicator light will stop blinking and return to the current backlight effect when connected.
5. *Note: Press and hold FN+R until the light indicator flashes quickly to rematch the 2.4G receiver.

Wired Mode

1. Toggle the switch to the wired side and plug in the USB-C cable.
2. The "T" key will light up white for 3 seconds and then return to the current backlight effect to indicate connection.

Light Indicator

Understand the keyboard's indicator lights:

• FN key: When holding FN, Q/W/E/R/T keys light up white indicating current connectivity.
• Caps key: White light when triggered.
• Win key: White light when locked.
• L_Ctrl key: White light for 3 seconds when the number row is swapped to the function row.

Battery Check & Sleep Mode

Battery Check

Hold FN+Backspace. The backlight will turn off, and keys 1! through =+ will illuminate in red to indicate the current battery percentage. For example, keys 1! to 6^ illuminated means 60% battery; keys 1! to += illuminated means 100% battery.

*Note: The keyboard charges via wired or wireless connection when plugged in.

Sleep Mode

1. Battery Saving Mode: If no key is pressed for 2 minutes, the keyboard enters battery saving mode with the backlight off. Press any key to wake it.
2. Deep Sleep Mode: If no key is pressed for 10 minutes, the keyboard enters deep sleep mode, disconnecting and turning off the backlight. Press any key to wake it.

How to Connect to VIA

To use the VIA software for customization:

1. Visit github.com/WestBerryVIA/via-releases/releases to download the latest VIA application for your operating system.
2. Turn off the "Use V2 Definition (deprecated)" button.
3. Download the EPOMAKER Galaxy65 JSON file from epomaker.com/blogs/via-json/epomaker-galaxy65-json.
4. Load the JSON file into the VIA application.
5. Once loaded, the "Configure" tab will display the keyboard layout and programmable functions.

Replacing Keycaps and Switches

For a detailed guide, scan the QR code or visit: epomaker.com/blogs/guides/diy-guide-how-to-remove-and-replace-your-mechanical-keyboard-switches

Tools Included

• Keycap Puller
• Switch Puller

Removing Switches

1. Grip the switch with the switch removal tool, aligning the teeth vertically with the switch.
2. Apply pressure with the switch puller until the switch releases from the plate.
3. Gently pull the switch upwards vertically.

Installing Switches

1. Ensure switch pins are straight and clean.
2. Align the switch vertically so the Gateron logo faces north. Pins should align with the keyboard PCB.
3. Press the switch down until it clicks, indicating it's secured to the plate.
4. Inspect and test the switch.

Important Note: If a key doesn't work, pins might be bent. Remove and reinstall. Avoid excessive force. Contact customer service if you encounter issues.

Technical Assistance & Warranty

Technical Assistance

For technical support, email support@epomaker.com with your order number and a detailed description of the issue. Responses are typically within 24 hours. For purchases made through distributors, contact them directly.

Community Forums

Join the community on:

• Discord
• Reddit

Warranty

EPOMAKER's warranty covers factory defects affecting functionality. It does not cover damage from normal wear and tear. Defective products may be replaced, potentially requiring the return of the original unit. The warranty is 1 year for products purchased directly from EPOMAKER.com. Modifications or unauthorized changes void the warranty. Warranty is only valid for purchases from official EPOMAKER stores.