Park Assist Automated Parking System

Automated Parking System: Park Assist

The Park Assist system is an automated system designed for parallel parking in confined spaces. For optimal performance, the vehicle should be aligned parallel to the line of parked vehicles where you intend to park, with the front wheels pointing straight ahead. Parking on a curve may lead to inaccurate distance calculations by the system.

When the sensors detect sufficient space for parking, an indication will appear on the information panel. The vehicle will then maneuver itself into the parking space without driver intervention. A message will appear on the information panel when it's time to release the steering wheel.

System Operation and Safety

Important Note: The Park Assist system is intended solely to assist the driver. The driver remains responsible for careful and attentive operation of the vehicle during parking maneuvers.

Potential Limitations:

• The Park Assist system may not detect moving objects such as children or animals if they are not within close proximity. Always exercise extreme caution during maneuvers.
• Sensors may not detect certain obstacles, such as narrow posts, small objects near the ground, mesh fences, or in some cases, bicycles or motorcycles parked along the roadside.
• All sensors must be clean and unobstructed within their detection range (e.g., free from leaves, dirt, snow, or insects). Dirty sensors can lead to incorrect distance calculations or false indications.

When Park Assist Should Not Be Used:

• If a temporary spare wheel is fitted.
• If a sensor is damaged, or the bumper is damaged to the extent that the sensor mounting point is affected.
• If there are obstructions within the sensor's detection zone, such as attached items (e.g., bumper trim, bicycle rack, trailer, stickers).
• If the vehicle is used for transporting cargo that extends beyond its dimensions.

Curb Height: For effective parking, the curb height relative to the road should be within an acceptable range. Damaged, very low, or snow/debris-covered curbs may lead to inaccurate sensor readings.

Note: All doors must be securely closed. During maneuvering under Park Assist, the system remains active and will emit an audible signal if objects are detected nearby.

Initiating and Controlling Park Assist

Activation: To activate Park Assist, press the Park Assist button while driving forward at a speed of less than 30 km/h (19 mph). An indicator light will illuminate on the button.

Canceling Maneuvers: The automated maneuver can be canceled at any time by holding or turning the steering wheel, or by pressing the Park Assist button again.

System Behavior:

• If the vehicle's speed exceeds 30 km/h (19 mph), a "SLOW DOWN!" message will appear. The message persists until the speed is reduced to 30 km/h (19 mph) or below. If the speed is not reduced, the system will deactivate, and the button indicator will extinguish.
• Sensor performance may be affected by rapid temperature changes. For example, when moving from a warm environment to a cold one, sensors may require time to adapt. The same applies when moving from a cold to a warm environment.
• The information panel will display the Park Assist window with a "Searching" message and corresponding graphics. Follow the on-screen instructions.
• For effective operation, maintain a distance of 0.5–1.5 meters (1.6–4.9 feet) between the vehicle and the row of parked vehicles or objects you wish to park next to.
• Initially, the system searches for a space on the front passenger side. To search on the driver's side, activate the turn signal in that direction.
• As the vehicle moves forward, potential parking spaces are evaluated and results are displayed graphically.
• A short audible signal confirms the detection of a suitable space. The display will prompt you to stop or proceed to the starting point, depending on the vehicle's current position.
• Before engaging reverse gear, ensure there are no obstructions (e.g., pedestrians entering the parking space).
• You will be prompted to engage reverse gear (R). The Park Assist system will then control the steering, and you should release the steering wheel. Gently release the brake pedal to slowly maneuver the vehicle into the parking space. Follow the on-screen instructions.
• Driver Responsibility: The driver must maintain full control over the accelerator and brake pedals throughout the maneuver.
• If the driver manually turns the steering wheel during a Park Assist maneuver, the system will deactivate, and the indicator light on the button will go out.
• The Park Assist system can be reactivated by pressing the Park Assist button, which will resume the previous parking maneuver.

Troubleshooting and Limitations

Park Assist Not Searching for a Parking Space:

• The system may be deactivated.
• The vehicle's speed may exceed 30 km/h (19 mph).

Park Assist Not Offering a Parking Space:

• Sensors may be partially or fully covered by dust, dirt, ice, or snow.
• There may not be enough space on the opposite side of the vehicle for the front of the car to follow the required trajectory.
• The vehicle is too far (more than 1.5 m / 5 feet) from the row of parked vehicles.
• The vehicle is too close (less than 41 cm / 16 inches) to the row of parked vehicles.
• The vehicle was driven in reverse. Park Assist searches for parking spaces only when the vehicle is in forward gear (D).

Park Assist Inaccurately Parks the Vehicle:

• One or more system limitations have been encountered. Refer to Section 141, "Limitations of the Park Assist System."

System Malfunctions: If a system malfunction is detected, a continuous audible signal will sound, and a message will appear on the information panel. Contact a dealer or authorized company workshop as soon as possible.

System Limitations:

• Parking space dimensions may have changed since the initial measurement.
• The parking space has an uneven or obstructed curb (e.g., by leaves, snow).
• The vehicle is carrying cargo that extends beyond its dimensions.
• Unauthorized repairs or modifications have been performed on the vehicle.
• Unauthorized wheels or tires are fitted, or tires are significantly worn.
• Parked vehicles have additional equipment in a raised position (e.g., snowplow, bicycle rack).
• The parking space is located at a corner or on a curve.
• Sensors are dirty or covered with mud, ice, or snow.
• Adverse weather conditions (fog, rain, snow).
• Uneven road surfaces (e.g., gravel).
• A tow hitch or trailer coupling is fitted.
• Thin or wedge-shaped obstacles are detected.
• Rising or protruding obstacles are detected (e.g., ledges, tree branches).
• Obstacles with sharp edges or corners are detected.