Distributor - SAC-ASI-J-Y-Y-N - 1405622
Phoenix Contact
Product Overview
AS-Interface H-distributor with a high degree of protection, parallel wired, for the distribution of AS-Interface flat-ribbon conductors.
This PDF document is generated from the Phoenix Contact Online Catalog. Please find complete data in the user's documentation. General Terms of Use for Downloads are valid at phoenixcontact.com/download.
Compliance: RoHS compliant.
Key Commercial Data
| Item | Value |
|---|---|
| Packing unit | 1 pc |
| GTIN | 4046356754934 [GTIN barcode] |
Technical Data
Ambient Conditions
| Parameter | Value |
|---|---|
| Degree of protection | IP65, IP67, IP69K |
| Ambient temperature (operation) | -25 °C ... 75 °C |
| Ambient temperature (storage/transport) | -25 °C ... 85 °C |
General Data
| Parameter | Value |
|---|---|
| Rated current at 40°C | 8 A |
| Rated voltage | ≤ 32 V DC |
| Number of positions | 4 |
| Overvoltage category | III |
| Degree of pollution | 3 |
| Alternative short product description | H distributor |
| Connection method | AS-i penetration technique |
Characteristics Head 1
| Parameter | Value |
|---|---|
| Head type | Load center AS-i Screw locking |
| No. of positions (pin connector pattern) | 4 |
| Material (component) | CuSn (Contact) |
| Contact surface | Ni/Au (Contact surface) |
| Contact carriers | PBT (Contact carriers) |
| Housing | PBT (Housing) |
| Screw connection | Stainless steel (Screw connection) |
| Torque (Locking screw) | 1.65 Nm |
Characteristics Head 2
| Parameter | Value |
|---|---|
| Color | black |
Environmental Product Compliance
| Compliance | Details |
|---|---|
| China RoHS | Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values |
Drawings and Diagrams
Dimensional Drawing
The distributor has the following approximate dimensions:
- Height: 40.5 mm
- Width: 22 mm
- Depth: 27.7 mm
The drawing shows a side view and a front view of the distributor. The front view shows a circular cap with a cross-shaped slot for securing.
Mounting Hole Dimensions
The distance and position of the mounting holes are detailed:
- Hole diameter: Ø4.2 mm
- Horizontal distance between hole centers: 40.5 mm
- Vertical distance between hole centers: 17 mm
- Overall width for mounting: 27.7 mm
The diagram shows two circular holes with their centers positioned relative to each other and the edges of a mounting surface.
Circuit Diagram
The contact assignment for the AS-Interface distributor is as follows:
- Pin 3.1: AS-i +
- Pin 3.2: AS-i -
- Pin 4.1: AS-i +
- Pin 4.2: AS-i -
This diagram illustrates the internal connections for the AS-Interface power and data lines.
