AXL F BK PN TPS - Bus Coupler
Phoenix Contact
Item Number: 2403869
URL: https://www.phoenixcontact.com/us/products/2403869
This document provides technical specifications and product information for the Phoenix Contact AXL F BK PN TPS Bus Coupler. Data is sourced from the online catalog.
Product Description
The bus coupler is intended for use within a PROFINET network. It creates the link to the Axioline F I/O system and industrial I/O signals connected to it. Up to 63 Axioline F devices can be connected to the bus coupler. Device descriptions for Phoenix Contact controllers are integral parts of the engineering tools PC Worx and PLCnext Engineer. Corresponding GSDML files are available for integrating the Axioline F station into other programming systems.
Your Advantages
- 2 Ethernet ports (with integrated switch)
- Conformance with PROFINET specification V2.3
- Supports PROFIsafe
- Supports PROFIenergy
- Supports PROFINET S2 system redundancy (firmware version 1.30 or later)
- PROFINET RT and IRT
- Minimum cycle time of PROFINET for RT and IRT is 250 µs
- Firmware can be updated
- Runtime in bus coupler is negligible (almost 0 µs)
- Typical cycle time of the Axioline F local bus is around 10 µs
- Web-based management
- Supports the operation of Axioline Smart Elements
- Supports passive Smart Elements (firmware version 1.30 or later)
- Supports IOL-CONF (firmware version 1.30 and later)
- Supports Diag+
- Safe analog value processing with SAFE AI and other components
Commercial Data
| Item number | Packing unit | Sales key | Product key | Catalog page | GTIN | Weight per piece (including packing) | Weight per piece (excluding packing) | Customs tariff number | Country of origin |
|---|---|---|---|---|---|---|---|---|---|
| 2403869 | 1 pc | DR02 | DRI21A | Page 69 (C-6-2019) | 4055626345826 | 221.4 g | 220.8 g | 85176200 | DE |
Technical Data
Dimensions
Image of the Axioline F Bus Coupler, showing its compact form factor with RJ45 connectors.
The device has a width of 45 mm, a height of 126.1 mm, and a depth of 74 mm. The depth measurement applies when a TH 35-7.5 DIN rail is used, in accordance with EN 60715.
Notes
| Utilization restriction | EMC note |
|---|---|
| EMC: class A product, see manufacturer's declaration in the download area |
Interfaces
PROFINET
| Number of interfaces | 2 |
| Connection method | RJ45 jack |
| Note on the connection method | Auto negotiation and autocrossing |
| Transmission speed | 100 Mbps (full duplex) |
| Transmission physics | Ethernet in RJ45 twisted pair |
Axioline F local bus
| Number of interfaces | 1 |
| Connection method | Bus base module |
| Transmission speed | 100 Mbps |
Service
| Number of interfaces | 1 |
| Connection method | USB type C |
System Properties
| System limits | |
| Number of supported devices | max. 63 (per station) |
| Number of local bus devices that can be connected | max. 63 |
Device Function & Properties
| Device function | PROFINET device |
| Specification | Version 2.3 |
| Conformance Class | Conformance-Class C |
| Device ID | 1000 hex |
| Vendor ID | 00B0 hex |
| Type | Block modular |
| Product type | I/O component |
| Product family | Axioline F |
| Mounting position | any (observe temperature derating) |
| Scope of delivery | including bus base module and Axioline F connector |
Insulation Characteristics
| Overvoltage category | II (IEC 60664-1, EN 60664-1) |
| Pollution degree | 2 (IEC 60664-1, EN 60664-1) |
Electrical Properties
| Maximum power dissipation for nominal condition | max. 2.5 W |
| Potentials: Communications power UL feed-in | |
| Supply voltage | 24 V DC |
| Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Current draw | max. 600 mA (2.0 A at UBus, UL = 24 V, up to HW 03) max. 700 mA (2.5 A at UBus, UL = 24 V, from HW 04) |
| Power consumption | max. 14.4 W (2.0 A at UBus, UL = 24 V, up to HW 03) max. 16.8 W (2.5 A at UBus, UL = 24 V, from HW 04) |
| Protective circuit | Surge protection; electronic |
| Reverse polarity protection | no |
| Potentials: Axioline F local bus supply (UBus) | |
| Supply voltage | 5 V DC (via bus base module) |
| Power supply unit | max. 2 A (up to HW 03) max. 2.5 A (As of HW 04) |
| Electrical isolation/isolation of the voltage ranges | |
| Test voltage: PROFINET interface 1 / PROFINET interface 2 | 1500 V AC, 50 Hz, 1 min. |
| Test voltage: PROFINET interface 1 / 24 V communications voltage (UL) feed-in | 1500 V AC, 50 Hz, 1 min. |
| Test voltage: PROFINET interface 2 / 24 V communications voltage (UL) feed-in | 1500 V AC, 50 Hz, 1 min. |
| Test voltage: PROFINET interface 1 / functional ground | 1500 V AC, 50 Hz, 1 min. |
| Test voltage: PROFINET interface 2 / functional ground | 1500 V AC, 50 Hz, 1 min. |
| Test voltage: 24 V communications voltage (UL) feed-in / functional ground | 500 V AC, 50 Hz, 1 min. |
Connection Technology
Axioline F connector
| Connection name | Axioline F connector |
| Note on the connection method | Please observe the information provided on conductor cross sections in the "Axioline F: system and installation" user manual. |
| Conductor connection | |
| Connection method | Push-in connection |
| Conductor cross section rigid | 0.2 mm² ... 1.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 1.5 mm² |
| Conductor cross section AWG | 24 ... 16 |
| Stripping length | 8 mm |
Axioline F connector
| Connection method | Push-in connection |
| Note on the connection method | Please observe the information provided on conductor cross sections in the "Axioline F: system and installation" user manual. |
| Conductor cross section, rigid | 0.2 mm² ... 1.5 mm² |
| Conductor cross section, flexible | 0.2 mm² ... 1.5 mm² |
| Conductor cross section AWG | 24 ... 16 |
| Stripping length | 8 mm |
Environmental and Real-life Conditions
| Ambient conditions | Values |
|---|---|
| Ambient temperature (operation) | -25 °C ... 60 °C (Mounting position: wall mounting on horizontal DIN rail) -25 °C ... 55 °C (Mounting position: any) |
| Degree of protection | IP20 |
| Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
Standards and Regulations
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
Mounting
| Mounting type | DIN rail mounting |
| Mounting position | any (observe temperature derating) |
Diagrams
Connection of the cables: Diagram showing the physical connections. It illustrates Ethernet ports (X1, X2) and a 24 V DC power input (UL). Status LEDs (BF, SF, RDY, DE) are also indicated.
Dimensional drawing: The device has a width of 45 mm, a height of 126.1 mm, and a depth of 74 mm.
Block diagram: Functional block diagram illustrating the internal architecture. It shows two Ethernet interfaces, a central microcontroller (µC), LEDs for status indication, power inputs (UL 24V, UBus 3.3V), and the connection to the local bus (UBus). Reset and Service interfaces are also depicted.
Approvals
To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/2403869
- DNV GL (Approval ID: TAA00000DF)
- LR (Approval ID: LR2001902TA-08)
- ClassNK (Approval ID: 14A006)
- BV (Approval ID: 36433/B4 BV)
- PRS (Approval ID: TE/1020/880590/21)
- BSH (Approval ID: 840)
- RINA (Approval ID: ELE008423XG)
- ABS (Approval ID: 20-2059154-PDA)
- PROFINET (Approval ID: Z12930)
- UAE-RoHS (Approval ID: 23-02-63241)
- cULus Listed (Approval ID: E238705)
Classifications
| Classification System | Code |
|---|---|
| ECLASS-11.0 | 27242608 |
| ECLASS-12.0 | 27242608 |
| ECLASS-13.0 | 27242608 |
| ETIM 9.0 | EC001604 |
| UNSPSC 21.0 | 32151600 |
Environmental Product Compliance
| REACH SVHC | Lead 7439-92-1 |
| China RoHS | Environmentally Friendly Use Period = 50 years. For information on hazardous substances, refer to the manufacturer's declaration available under "Downloads". |
Accessories
- AXL F BS BK - Bus connector (2701422): Axioline F bus base module for housing type BK. Link
- FL PLUG RJ45 GR/2 - RJ45 connector (2744856): RJ45 connector, degree of protection: IP20, 8 positions, 1 Gbps, CAT5, Crimp connection, AWG 26-24, straight outlet, gray. Link
- FL PLUG RJ45 GN/2 - RJ45 connector (2744571): RJ45 connector, degree of protection: IP20, 8 positions, 1 Gbps, CAT5, Crimp connection, AWG 26-24, straight outlet, green. Link
- FL CAT5 HEAVY - Data cable (2744814): CAT5-SF/UTP cable, heavy-duty installation cable, 2 x 2 x 0.22 mm², shielded, outer sheath: 7.8 mm diameter. Link
- FL CAT5 FLEX - Installation cable (2744830): Installation cable, Ethernet CAT5 (100 Mbps), shielded, PUR halogen-free, water blue RAL 5021, 4-wire. Link
- FL CRIMPTOOL - Assembly tool (2744869): Crimping pliers for assembling RJ45 plugs. Link
- ZB 20,3 AXL UNPRINTED - Zack marker strip (0829579): Zack marker strip for Axioline F device labeling, unprinted, 25-section. Link
- ZBF 10/5,8 AXL UNPRINTED - Zack Marker strip, flat (0829580): Flat Zack Marker strip, white, unlabeled, for terminal block width 10.15 mm. Link
- EMT (35X18,7)R - Insert label (0801831): Insert label for marking Phoenix Contact Axioline modules, roll, white, unlabeled. Link
- SAFE AI - Function block (2400057): Function block library for safety-related analog value acquisition. Contact safety hotline (+49 5281 9-462777) before ordering. Link
- CAB-USB A/ USB C/1,8M - Connecting cable (2404677): Connecting cable from USB A to USB C for controller-PC connection. Link
- CAB-USB C/ USB C/1,8M - Connecting cable (1021809): Connecting cable from USB C to USB C for controller-PC connection. Link
Phoenix Contact 2024 - all rights reserved
Phoenix Contact USA
