Resistex Argos Luminaire Installation Guide (Model 601789)

Safety and General Information

Safety Notes:

• Never work on the luminaire when it is live.
• Installation must be performed by a professional installer in compliance with electrical installation standards and regulations.
• Risk of electrostatic discharges (ESD Norm). Handle with necessary precautions.
• Please observe the notes and steps described in the mounting instructions.

Maintenance Instructions:

• Do not use chemical or abrasive products to clean the luminaire.
• Keep these instructions for dismantling or future maintenance.
• Additional information about RESISTEX luminaires is available on the website: www.resistex-sa.com.
• RESISTEX cannot be held responsible for any misuse of the product.

Installation Steps

Step 1: Prepare the mounting surface. The luminaire has a length of 800mm. Ensure mounting points are suitable for screws of approximately 6mm diameter.

Step 2: Attach the mounting plate to the surface using two screws.

Step 3: Identify the connection points on the back of the luminaire body.

Step 4: Connect the electrical wires to the terminals inside the luminaire base, observing polarity: N (Neutral) and L (Live).

Step 5: Insert the power cable through the cable entry gland.

Step 6: Ensure the cable type is HO5RN-F or U-1000 R2V, with a diameter between 6mm and 9mm.

Step 7: Tighten the cable gland to secure the cable and ensure proper sealing.

Step 8: Align the luminaire body with the mounted plate, noting the 'Click' mechanism for attachment.

Step 9: Rotate the luminaire body to lock it securely onto the mounting plate.

Step 10: The luminaire is now fully installed.

Product Specifications & Compliance

Certifications/Ratings:

• ROHS compliant
• Class I (Norme Classe I)
• IP rating: 65
• IK rating: 10
• IRC rating: 82
• Warranty: 5 years (Garantie 5 ans)
• CE marked