STOCKHOLM 2025 Floor Lamp
By IKEA
Important Safety Instructions
For indoor use only.
This product features a polarized plug (one blade is wider than the other) to reduce the risk of electric shock. The plug fits into a polarized outlet in only one orientation. If the plug does not fit fully, reverse it. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. Do not attempt to bypass the plug's safety features or alter the plug.
CAUTION:
To prevent electrical shock, match the wide blade of the plug to the wide slot and insert fully.
WARNING:
Deviation from assembly instructions may result in fire or electric shock.
Assembly Instructions
Parts Overview
- 1x Long pole section
- 1x Base plate
- 1x Top fitting/socket assembly
- 3x Small plastic clips/fasteners
- 1x Power cord with plug
Step 1: Prepare and Route Power Cord
Begin assembly by gathering parts. Tools are indicated as necessary, and consulting IKEA is suggested if help is needed. The power cord is threaded through the base and the first pole section.
Diagram shows a person with a screwdriver, indicating tools are needed. Another diagram shows people looking confused at parts, then consulting IKEA, suggesting help or instructions. Parts shown: 1x long pole, 1x base plate, 3x small clips, 1x power cord.
Step 2: Connect Pole Sections
Thread the power cord through subsequent pole sections as they are joined. Pole sections are connected by screwing their threaded ends together.
The power cord is fed down through the pole. A close-up shows two threaded pole sections being screwed together.
Step 3: Attach Pole to Base and Connect Wiring
Attach the assembled pole structure to the base plate, securing it with screws from underneath. Connect the power cord wires to the terminals in the base.
The assembled pole is attached to the base. Screws are inserted from the underside of the base plate into the pole. A close-up shows the power cord wires being connected to terminals.
Step 4: Continue Pole Assembly and Wiring
Ensure the power cord is securely connected to the base terminals. Continue assembling and connecting the remaining pole sections.
The power cord is connected to the base terminal. The wires are inserted into connectors. The pole sections are connected. A close-up shows threaded pole sections being screwed together.
Step 5: Attach Socket Assembly and Lamp Shades
Attach the socket assembly to the top of the pole, tightening the connection. Mount the lamp shades onto the socket assembly, using the provided fasteners (3x per shade) and screws. Ensure all shades are securely fastened.
The socket assembly is attached to the top of the pole. A close-up shows a threaded connection being tightened, with an information icon (ⓘ) indicating a detail. The lamp shades are attached. A person holds a shade, aligning it. A close-up shows three fasteners (3x) being used to secure the shade with screws. The lamp shades are secured. Three fasteners (3x) are screwed into the shade assembly.
Step 6: Install Light Bulb
Install a suitable light bulb into the socket. The lamp is now assembled.
Information icon (ⓘ). The lamp is shown illuminated. A close-up shows a threaded socket being turned, indicating light bulb installation.