Coat Rack

Important Safety Information

Read carefully before beginning assembly. This unit contains small parts that present a choking hazard for children under 3 years of age. These parts are for adult assembly only and should be permanently affixed to the furniture. Any unused parts should be discarded properly. For easier assembly, it is recommended to have two people. Always use proper tools, carefully review the parts and hardware list, and assemble the unit on a protected or carpeted surface to avoid scratches. Follow assembly steps in order and periodically check that all connectors are tight. Ashley Furniture Industries, LLC. disclaims liability for damages or injuries resulting from failure to follow instructions, improper assembly, or improper use.

Care and Cleaning Instructions

Proper care and cleaning will extend the life of your product. Use a soft, clean cloth that will not scratch the surface when dusting. Clean only with a slightly damp cloth. Do not use chemical-based products or solvents. Liquid spills should be removed immediately. Direct sunlight may fade or alter the color of wood finishes.

Assembly Overview

Heads Up

Time: 15 Minutes

People Needed: 2

Effort Scale: Manageable

Components

The coat rack is comprised of four main components:

• Part 1: Bottom
• Part 2: Left Side
• Part 3: Right Side
• Part 4: Back

Hardware

The hardware kit includes various fasteners and connectors:

• H14 (8 pieces)
• H56 (2 pieces)
• H62 (8 pieces)
• G52 (3 pieces)
• G53 (3 pieces)
• G71 (4 pieces)
• G73 (10 pieces)
• G74 (3 pieces)
• G75 (4 pieces)
• G76 (4 pieces)

Tools Required

Required Tools: Hammer, Screwdriver

Recommended Tools: Measuring Tape, Level

Assembly Steps

1. Attach the Left Side (2) to the Bottom (1) using H14 screws and G53 connectors.
2. Attach the Right Side (3) to the Bottom (1) using H14 screws and G53 connectors.
3. Connect the Back (4) to the assembled sides and bottom using H62 connectors and H14 screws.
4. Secure the main structure further with H62 connectors and G52 screws.
5. Attach any remaining structural elements using H62, G74, and G73 hardware as indicated in the diagrams.
6. Ensure all connections are tight.

Mounting Options

Option 1: Mounting with Stud

Locate a stud in the wall. Screw the bracket (G75) into the stud using a long screw (G76). Ensure the bracket is securely fastened.

Option 2: Mounting with Wall Anchor

Drill a hole through the wall board using a 1/4-inch drill bit. Insert a wall anchor (G71). Screw the bracket (G75) into the wall anchor using a long screw (G76).

For both options, measure and mark the desired height on the wall, ensuring equal distance from the ground. The recommended height is typically 32 inches from the ground.

Warranty Information

Ashley Furniture Industries, Inc. provides limited warranties for its products, covering material manufacturing defects for the original retail purchaser. Warranties vary by product part, including frames, springs, mechanisms, cushions, leather, upholstery, finishes, and other furniture products. For example, frames may have a Limited Lifetime Warranty, while finishes have a 1-Year Limited Warranty. Specific terms apply to cushion softening and leather characteristics, which are considered normal wear and not defects. Refunds are not available; repair or replacement is the sole remedy. Warranty coverage may be voided by misuse, abuse, improper maintenance, or unauthorized modifications. To obtain warranty service, contact the authorized retailer from whom the furniture was purchased, providing the original bill of sale and product serial number.

Contact and Social Media

For replacement parts or assembly assistance, contact customer service at RTAParts@ashleyfurniture.com or visit www.ashleyfurniture.parts. You can also call 1-844-966-0809.

Share your style with Ashley Furniture using #AshleyFurniture and @AshleyHomestore on social media.