H743-34R Desk

⚠️ Important Safety Notice

Read carefully before beginning assembly!

• Always use proper tools.
• Follow the assembly steps in order; do not skip any steps.
• Check all packing materials carefully for small parts that may have come loose. If parts are missing, contact the retailer from which you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS.
• Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
• Keep these instructions for future reference.
• When assembling products that involve glass or mirrors, be very careful handling them, as severe injury may result if they break. Never handle large pieces of glass or mirrors alone.
• When assembling products with electrical cords (lamps, lights, etc.), always ensure (1) the electrical cord is unplugged before assembly and (2) be careful not to twist the electrical cord during assembly.
• When assembling shelves or entertainment centers, do not stand on lower shelves to assemble upper shelves; use a step ladder.
• Do not stand on tables, including but not limited to, end tables, coffee tables, and dinner tables, as they are not designed to support the weight of a person.
• Where assembly instructions state that assembly requires two or more people, do not attempt by yourself as there is a risk of injury.

NOTE: ASHLEY FURNITURE INDUSTRIES, LLC disclaims any liability for damages or injuries which may occur due to failure to properly follow assembly instructions, properly assemble the product, or properly use the product.

NOTE: YOUR UNIT MAY LOOK DIFFERENT IN APPEARANCE FROM THE ONE SHOWN IN THE ILLUSTRATIONS ON THIS INSTRUCTION SHEET.

⚙️ Parts and Hardware

The diagram on page 2 shows the components for assembly:

(Note: Connector 'F' is shown in assembly diagrams but not listed in the parts list.)

⚙️ Assembly Instructions

IMPORTANT: UNIT SHOULD BE ASSEMBLED BY TWO OR MORE PEOPLE. DO NOT TIGHTEN ANY BOLTS UNTIL ALL BOLTS HAVE BEEN STARTED!

Step 1: Prepare and Attach Legs

Refer to the diagram on page 2. Identify parts A (desk surface) and B (legs). Begin attaching the legs to the underside of the desk surface using the provided bolts (C and D) and the M5 Allen wrench (E). Ensure all bolts are started but not fully tightened at this stage.

Step 2: Secure Legs with Locking Mechanism

On page 3, Step 2 illustrates attaching the desk legs (B) to the main desk surface (A). Close-up views detail a locking tab mechanism. On the left side, push the tab down. On the right side, push the tab up to secure the leg connection.

Step 3: Connect Extension Piece

Page 3, Step 3 shows how to connect the extension piece to the main desk. Use the M5 Allen wrench (E) and the connector (F) to join the extension to the main desk unit as depicted in the diagram.

Step 4: Join Desk Sections

Page 4, Step 4 details connecting the two desk sections (main desk and extension). The diagrams show how the left and right desk parts are brought together and secured, highlighting an interlocking or sliding mechanism at the connection points. Cable management holes are also visible on the desk surface.

Step 5: Final Assembly

Page 5 provides an illustration of the fully assembled L-shaped desk.