ONE DRAWER NIGHTSTAND
Part #: 10502403
Brand: Signature Design by Ashley
Model: One Drawer Nightstand
Important Safety Notice
Please read carefully before beginning assembly.
- This unit contains small parts that present a choking hazard for children under 3 years of age. These parts are for adult assembly only and should be permanently affixed to the furniture. Any unused parts should be discarded properly. ⚠️
- To make the assembly process easier, ask a friend to help you. ??? 2 people required.
- Always use proper tools. ?️
- Carefully review the parts and hardware list.
- It is recommended that you assemble the unit on a protected surface or carpeted floor to avoid scratches.
- Follow assembly steps in order. DO NOT SKIP ANY STEPS.
- Periodically check to ensure that all connectors (bolts, screws, etc.) are tight. ?
- Keep the instructions for future reference.
Ashley Furniture Industries, LLC disclaims any liability for damages or injuries which may occur due to failure to properly follow assembly instructions, properly assemble the product, or properly use the product.
(Safety notices also provided in Spanish, French, and Dutch.)
Care and Cleaning Instructions
Proper care and cleaning will extend the life of your purchase and maintain its finish and quality.
- Use a soft, clean cloth that will not scratch the surface when dusting.
- Clean only with a slightly damp cloth.
- Do not use chemical-based products or solvents.
- Liquid spills should be removed immediately.
- Direct sunlight may fade or alter the color of wood finishes.
(Care and cleaning instructions also provided in Spanish, French, and Dutch.)
Customer Service & Contact
To order replacement parts or if you have difficulty assembling this unit, please refer to the front page of this manual for model and serial # information, and find the needed part number(s) from the parts list. Then call our customer service line. Please do not return parts to the store.
- Email: ✉️ RTAParts@ashleyfurniture.com
- Website: ? www.ashleyfurniture.parts
- Phone: ? 1-844-966-0809
Assembly Overview
Estimated Time: 30 Minutes ⏱️
People Required: 2 ???
Effort Scale: Low to High ?
Tools Required:
Hammer ?
Screwdriver ?
Components
Hardware
Screw
Nail
Cam Lock Bolt
Screw
Screw
Screw
Cam Lock
Screw
Screw
Drawer Slide Rail
Screw
Note: Some hardware (H84) may be pre-assembled to unit sides. ?
Assembly Steps
Step 1
Attach the TOP (1) to the side panels using four (4) H14 screws. ? ?
Diagram shows part 1 (TOP) with four H14 screws being inserted from the underside into pre-drilled holes.
Step 2
Attach LEFT SIDE (2) and RIGHT SIDE (3) to the TOP (1) using four (4) H14 screws and four (4) H62 cam locks. ? ?
Diagram shows parts 2 and 3 being connected to part 1. H14 screws are inserted from the outside of parts 2 and 3 into part 1, and H62 cam locks are inserted into parts 2 and 3 to secure the connection.
Step 3
Insert SHELF (11) between LEFT SIDE (2) and RIGHT SIDE (3). Secure using four (4) H56 screws and four (4) H62 cam locks. ? ?
Diagram shows part 11 being placed horizontally between parts 2 and 3. H56 screws are inserted from the outside of parts 2 and 3 into part 11, and H62 cam locks are inserted into parts 2 and 3 to secure the shelf.
Step 4
Continue assembling the main unit. Attach the remaining side panel (part 3) to the TOP (1) and SHELF (11) using H14 screws and H62 cam locks. ? ?
Diagram shows the partially assembled unit from Step 3, with the remaining side panel (part 3) being attached to the top and shelf. Arrows indicate the direction of assembly.
Step 5
Assemble the main box structure. Connect LEFT SIDE (2) and RIGHT SIDE (3) to the TOP (1) and SHELF (11) using two (2) H14 screws and two (2) H62 cam locks on each side. ? ?
Diagram shows the main unit structure being formed by connecting the side panels to the top and shelf. Arrows indicate insertion points for screws and cam locks.
Step 6
Attach the remaining side panel (part 2) to the structure, securing with two (2) H62 cam locks. ? ?
Diagram shows the final side panel being attached to complete the main box frame. H62 cam locks are used for securing.
Step 7
Attach the BOTTOM (4) panel to the assembled unit using four (4) H50 screws. ? ?
Diagram shows the bottom panel (part 4) being screwed into the base of the main unit.
Step 8
Assemble the leg and apron structure. Attach LEGS (13) to the APRON (5) pieces using four (4) H39 cam lock bolts and four (4) H14 screws. ? ?
Diagram shows two leg pieces (13) being connected to two apron pieces (5) using H39 bolts and H14 screws.
Step 9
Continue assembling the leg/apron structure. Attach the remaining APRON (5) pieces to the LEGS (13) using four (4) H56 screws and four (4) H62 cam locks. ? ?
Diagram shows the second set of apron pieces being attached to the legs, completing the base structure.
Step 10
Attach the assembled leg/apron structure (parts 5 & 13) to the main unit. Secure using four (4) H14 screws. ? ?
Diagram shows the base structure being attached to the bottom of the main nightstand unit.
Step 11
Insert the BOTTOM (4) panel into the main unit. Secure using four (4) H56 screws. ? ?
Diagram shows part 4 being inserted into the main unit body. This step appears to be a re-insertion or clarification of the main bottom panel attachment.
Step 12
Attach the UNIT BACK (12) panel to the main unit. Ensure edges are aligned (90° angle). Secure using eighteen (18) H21 nails. ? ?
Diagram shows the back panel being nailed into place along the edges of the main unit. An angle guide indicates 90° alignment.
Step 13
Assemble the drawer box. Connect DRAWER LEFT SIDE (7) and DRAWER RIGHT SIDE (8) to the DRAWER FRONT (6) using two (2) H68 screws. ? ?
Diagram shows the front of the drawer being connected to its side panels.
Step 14
Slide the DRAWER BOTTOM (10) into the grooves of the assembled drawer sides and front. ➡️
Diagram shows the drawer bottom panel being slid into the pre-cut grooves of the drawer assembly.
Step 15
Attach the DRAWER BACK (9) to the drawer assembly. Secure using four (4) H68 screws. ? ?
Diagram shows the back panel of the drawer being attached to complete the drawer box.
Step 16
Attach the drawer slide rails (G64) to the drawer and the main unit. Use three (3) G15 screws for the drawer and two (2) H58 screws for the unit. ? ?
Diagram shows drawer slide rails being attached to the sides of the drawer box and the interior of the nightstand frame.
Step 17
Insert the assembled drawer into the nightstand. ➡️
Diagram shows the completed drawer being slid into the nightstand opening.
Step 18
Final attachment of drawer slides. Apply pressure to glide for screw to engage. Secure using two (2) H58 screws and two (2) H84 screws. ? ?
Diagram shows final adjustments and securing of drawer slides. Text indicates applying pressure for proper engagement.
Warranty Information
Limited Warranties
Ashley Furniture Industries, LLC (the "Warrantor") warrants products and parts against material manufacturing defects for specified durations. These warranties are non-transferable and apply to the original retail purchaser only.
Key Warranty Details:
- Frames Used in Upholstered & Leather Products: Limited Lifetime Warranty*
- Springs: 5 Year Limited Warranty
- Recliner Mechanisms: 3 Year Limited Warranty
- Sleeper Mechanisms: 3 Year Limited Warranty
- Cushioning (Unattached/Attached): 1 Year Limited Warranty
- Leather and Upholstery Fabric: 1 Year Limited Warranty
- Top of Bed: 30 Days
- Finishes and Other Furniture Products: 1 Year Limited Warranty
Labor Coverage: Generally 1 Year, except for Top of Bed (30 Days).
Limitations and Exceptions: Warranties do not cover normal wear, misuse, abuse, or damage from improper care. Refunds are not available; repair or replacement is at Warrantor's option. Specific exclusions apply to leather, upholstery, and finishes.
Claim Procedure: Contact the retailer from whom the furniture was purchased. Provide bill of sale, serial number, and file within the warranty period. Arrangements for transportation of defective parts may be required.
Disclaimer: No other express warranty is made. Warrantor is not liable for consequential or incidental damages. This warranty gives specific legal rights which may vary by state.
CAUTION: Motion furniture has moving parts. Use caution during operation. Children should not play on or operate motion furniture.
(Warranty information is detailed and provided in English.)
Ashley | Home Furniture & Decor
