Hikvision Wireless Tri-Tech AM Detector DS-PDTT15AM-LM-WA

Diagram References

1. Appearance

• Indicator: PIR Triggered (top/bottom), Alarm, Masked, MW Triggered, Fault
• Screw Hole
• Top/Bottom Cover
• Front Panel
• PCBA
• PIR Module (Top)
• PIR Module (Bottom)
• Tamper Switch
• Power Switch
• Microwave Module
• Antenna
• PIR Angle
• Rear Panel

2. Vertical Pole Mount

3. Enrollment

• I. Enrollment succeeded.
• II. Check signal strength.

Note: The front panel should be installed before powering on successfully.

4. Detection Range

• I. Detection range
• 1. PIR Angle Settings
• 2. PIR Distance Settings
• II. Masking seal (Detailed diagrams show various masking seal configurations for different detection ranges and angles)

5. Anti-Masking Alarm

Scan the QR code for more information and operation help.

Specifications

Note: This product can only power the camera module (DS-PDCM15PF-IR) as its accessory.

Installation and Operation Details

Diagram 1: Shows the detector's components and dimensions.

Diagram 2: Illustrates vertical pole mounting.

Diagram 3: Demonstrates the enrollment process, including signal strength indication.

Diagram 4: Provides detailed detection range and angle settings, including various masking seal configurations for different scenarios. It also shows examples of correct and incorrect installation regarding sunlight and water exposure.

Diagram 5: Explains the anti-masking alarm functionality with different states (Disarmed, Detected, Armed) and signal strengths (Weak Inverse, Strong Inverse).

About this Manual

©2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.

This manual provides instructions for using and managing the Product. Information is subject to change without notice. The latest version can be found at the Hikvision website (https://www.hikvision.com/).

Disclaimer: Hikvision is not liable for any damages arising from the use of the product. Users are responsible for ensuring their use complies with applicable laws and does not infringe on third-party rights. The product must not be used for prohibited end-uses, including the development of weapons of mass destruction.

CE Compliance: The product complies with applicable harmonized European standards under the RE Directive 2014/53/EU, EMC Directive 2014/30/EU, and RoHS Directive 2011/65/EU.

WEEE Directive (2012/19/EU): Products marked with this symbol should not be disposed of as unsorted municipal waste. Return to a local supplier or designated collection point for recycling.

Battery Directive (2006/66/EC): Information on battery disposal and recycling is provided. Batteries marked with symbols indicating Cadmium (Cd), Lead (Pb), or Mercury (Hg) require specific recycling procedures.

FCC Information: This equipment complies with FCC Rules Part 15. Operation is subject to conditions that prevent harmful interference. Installation and operation require a minimum distance of 20cm between the radiator and the user's body.

Battery Caution:

• Risk of explosion if the battery is replaced with an incorrect type.
• Do not dispose of batteries in fire, hot ovens, or crush/cut them.
• Avoid exposing batteries to extremely high temperatures or low air pressure.
• Dispose of used batteries according to instructions.

Installation Caution:

• Install the equipment according to the manual's instructions.
• Securely attach the equipment to the floor/wall as per installation instructions to prevent injury.