User Manual for HIKVISION models including: K020103113, 2ADTD-K020103113, 2ADTDK020103113, DS-PK1-E-WA Wireless LED Keypad, Wireless LED Keypad, LED Keypad, Keypad
Hangzhou Hikvision Digital Technology Co., Ltd. K020103113 Wireless LED Keypad 2ADTD-K020103113 2ADTDK020103113 k020103113
1 1 DS-1PK1-E-WA Wireless LED Keypad User Manual EN 50131-1:2006+A1:2009+A2:2017 EN 50131-3:2009 EN 50131-5-3:2017 Security Grade(SG) 2 Environmental Class(EC) II Cerfied by Teleficaon 4 3 English Diagram Reference 1 Appearance 2 1. Indicator Fault Enrollment/Signal Strength Armed/Disarmed Alarm 2. Numeric and Funcon Key Fire Alarm Panic Alarm Medical Alarm Stay Arm Away Arm Disarm Output Control 3. Serial Port 4. Baery 2 Enrollment 3 Installation Check signal strength. 5. TAMPER Buon 6. Power Switch User Manual Scan the QR code for more informaon and operaon help. Specification RF Interface Speed Frequency Method Distance Transmion power Tamper switch Wireless module Power switch Buzzer Display Key Operaon Environment Indicator Backlight Number key Funcon key Humidity Temperature Wireless Keypad 42Kbps 915.0MHz 2GFSK 1200m (open area) 13 dbm 1, front and rear panel tamper-proof For wireless communicaon Power on/off 1 4: fault (orange), enrollment/signal (red/green), arming(red/green/blue), and alarm (red) white 10: 0 to 9 5: *, #, stay arming, away arming, disarming, and output 10% to 90% -10 °C to 55 °C (14 °F to 131 °F) -10 °C to 40 °C (14 °F to 104 °F) EN Cerfied Color White/Black Appearance Dimension(W x H x D) 140mm x 86mm x 22 mm Installaon Installaon Screw mounng Power supply 1.5 VDC, four AA baeries (included, Capacity: 2300 mAh each ), standby me more than two years Power Supply Current Max. current: 95 mA Quiescent current: 200 A 3 Weight Others Low voltage value Voltge Range Weight without baeries PS type Classificaon 1.1 V Fully charged (new) to 1.1 V (baery) 151 g, and 23 g each baery Type C Use inside the supervised premises 2 xxxx Device 1 2 3 4 Signal Strength Test User Manual 5 6 ©2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instrucons for using and managing the Product. Pictures, charts, images and all other informaon hereinaer are for descripon and explanaon only. The informaon contained in the Manual is subject to change, without noce, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (hps://www.hikvision.com/). Please use this Manual with the guidance and assistance of professionals trained in supporng the Product. and other Hikvision's trademarks and logos are the properes of Hikvision in various jurisdicons. Other trademarks and logos menoned are the properes of their respecve owners. Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the RE Direcve 2014/53/EU, the EMC Direcve 2014/30/EU, the RoHS Direcve 2011/65/EU. 2012/19/EU (WEEE direcve): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collecon points. For more informaon see: www.recyclethis.info 2006/66/EC (baery direcve): This product contains a baery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentaon for specific baery informaon. The baery is marked with this symbol, which may include leering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the baery to your supplier or to a designated collecon point. For more informaon see:www.recyclethis.info BATTERY CAUTION replacement of a baery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium baery types); disposal of a baery into fire or a hot oven, or mechanically crushing or cung of a baery, that can result in an explosion; leaving a baery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; and a baery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas Chemical burning danger Do not swallow the baery. Keep new and used baeries away from the children. If you think baeries might have been swallowed or placed inside any part of the body, seek immediate medical aenon. Risk of explosion if baeri is replaced by an incorrect type. Replacement of a baery with an incorrect type that can defeat a safeguard. Dispose of used baeries according to the instrucons and local regulaon. If the baery compartment does not close securetyly, stop using the product and keep it away from children. Install the baries acoording to the polarity mark on the baery holder. The opposite polarity may cause device damage. INSTALLATION CAUTION The addional force shall be equal to three mes the weight of the equipment but not less than 50N. The equipment and its associated mounng means shall remain secure during the installaon. Aer the installaon, the equipment, including any associated mounng plate, shall not be damaged. Install the device on the place with nonflammable surface, such as concrete wall. FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation explosure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. UD25370B 1 2 3 Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, ChinaPDFlib PDI 9.2.0p5-i (Win32) Serif Affinity Designer 1.9.2