DOD Meatbox SubSynth
Product Overview
The DOD Meatbox SubSynth is an effects pedal designed for guitar and bass, known for its sub-harmonic synthesis and octave effects. It offers unique tonal shaping capabilities for musicians seeking deep, resonant bass frequencies and synthesized textures.
Pedal Description: The pedal is housed in a red enclosure with white stripes. It features four control knobs labeled 'Octave', 'Output', 'Sub', and 'Low'. A blue LED indicator light is present below the controls, and a silver footswitch is located at the bottom center. The DOD logo and 'Meatbox SubSynth' branding are prominently displayed.
Controls
- Octave: Adjusts the amount of low octave added to the signal.
- Output: Sets the overall output level of the effect.
- Sub: Adjusts the amount of synthesized sub-harmonic effect added to the signal.
- Low: Adjusts the low-frequency content of the overall effect.
- Input: Connect your instrument here (1/4" TS Unbalanced).
- Footswitch: Engages or disengages the effect.
- LED: Illuminates when the effect is active.
- Output: Connect to the next pedal in your chain or your amplifier (1/4" TRS Unbalanced). This output allows you to send the dry (Ring) and processed (Tip) signals to your amplifier and other effects simultaneously via a TRS 'Y' cable. (Tip = Octave+Sub, Ring = Dry, Sleeve = Ground)
Usage
Recommended Placement
Most bassists prefer placing the Meatbox at the beginning of their effects chain. Guitarists may find it beneficial to place it after distortion effects or towards the end of their effects chain. A typical effects signal chain might include distortion, modulation effects (Chorus, Flanger, Phaser, Tremolo, etc.), and time-based effects (Delay and Reverb). Experiment with different effect positions for desired results.
Specifications
- Input: 1/4" TS Unbalanced - 470 kΩ
- Output: 1/4" TRS Unbalanced - 100 Ω
- Current Draw: 20 mA
- Bypass: True Bypass
- Power: 9VDC alkaline battery (not included) / PS0913DC power adapter (optional)
- Warranty: 1 Year
Safety and Compliance
General Warnings
Caution: Risk of electric shock. Do not open. This unit is not user-serviceable. Opening the unit will void the manufacturer's warranty. Keep the unit dry; if liquid is spilled on the unit, unplug it immediately and take it to the dealer for service. Unplug the device during thunderstorms to prevent damage.
Altitude Warning: Do not use this product above 2000 meters (6561 feet).
Power Supply Safety
UK Plug Warning: Do not use a molded mains plug that has been cut off from the cord. Never insert a damaged or cut mains plug into a 13 Amp socket. Ensure the fuse cover is in place. Replacement fuses must be 13 Amp and approved by ASTA to BS1362.
General Electrical Safety: Read and follow all instructions. Keep these instructions. Heed all warnings. Do not use near water. Clean only with a dry cloth. For indoor use only. Do not block any ventilation openings. Install in accordance with manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Use only attachments/accessories specified by the manufacturer.
Storm Warning: Unplug this apparatus during lightning storms or when unused for long periods of time.
Polarized and Grounding Plugs
Do not disregard the safety purpose of a polarized or grounding-type plug. A polarized plug has two blades, one wider than the other. A grounding-type plug has two blades and a third grounding pin. These features are for your safety. If the supplied plug does not fit your outlet, consult an electrician to replace the obsolete outlet.
Protect the power-supply cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Servicing: Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Power Switch and Mains Disconnection
The power switch used in this unit does not disconnect the unit from the mains supply. The mains plug must remain accessible. For rack mounting or other installations where the plug is inaccessible, a mains disconnect with all poles having a contact separation of at least 3 mm in each pole must be incorporated into the electrical installation of the rack or building.
If connected to a 240 V supply, a CSA/UL certified power cord must be used for this supply.
Wiring Instructions
Warning: This apparatus should be connected to a mains socket with protective earthing. The conductors in the mains lead are colored in accordance with the following code: Green and Yellow – Earth / Blue – Neutral / Brown – Live. As the colors of the conductors in the mains cable of this apparatus may not correspond with the color markings identifying the terminals in your plug, proceed as follows:
- The green and yellow colored conductor must be connected to the terminal in the plug marked with the letter E, or with the earth symbol ⏚, or colored green, or green and yellow.
- The blue colored conductor must be connected to the terminal marked with the letter N or colored black.
- The brown colored conductor must be connected to the terminal marked with the letter L or colored red.
Wire Color Table:
| Conductor | Wire Color (Normal) | Wire Color (Alt) |
|---|---|---|
| L (Live) | Brown | Black |
| N (Neutral) | Blue | White |
| E (Earth GND) | Green/Yellow | Green |
Important Grounding Warning: If properly grounded, certain faults within the unit or the system to which it is connected may result in hazardous voltage being present between the chassis and ground. Severe injury or death can occur if the chassis and ground are touched simultaneously.
Disposal
Do not dispose of this product with regular household waste. It must be collected separately for proper treatment, recovery, and recycling according to applicable laws (WEEE directive). Private households in 25 EU member states, Switzerland, and Norway can return their used electronic products free of charge to designated collection points or to the retailer (if purchasing a similar new one). For countries not listed above, contact your local authorities for the correct disposal method. This way, you will ensure that your waste product undergoes the necessary treatment, recovery, and recycling, thus preventing possible negative effects on the environment and human health.
Contact Information
DOD
59 Hwagok-ro 61gil, Gangseo-gu, Seoul 07590, Republic of Korea
support@digitech.com
