Endorfy Zephyr 80

Product Information

Designed by ENDORFY

Manufacturer: COOLING SP. Z O.O.

Address: UL. SOKOŁOWSKA 24, 05-806 SOKOŁÓW, POLSKA

Telephone: +48222920130

Website: www.endorfy.com

Certifications: CE, FC, UKCA, RoHS

Made in China

Installation Guide

Step: Plug In

Connect the DC 3-PIN connector of the fan to the corresponding header on your motherboard.

Diagram: A PC fan with a 3-pin connector is shown. A close-up view illustrates the process of plugging the 3-pin connector into a motherboard header, indicating the correct orientation.

For more information:

• Knowledge Base: endorfy.com/knowledge-base
• Customer Service: endorfy.com/contact
• Detailed Product Info: endorfy.com/EY4A019

Safety Instructions

1. The product should be used as intended. Incorrect use may damage the product and be dangerous to your health.
2. Make sure that the product is in good working order before using it.
3. This device is intended for indoor use, under normal humidity conditions. Do not use it outdoors.
4. Do not install and use the device within reach of children.
5. To prevent damage from condensation, allow the device to warm up to ambient temperature before use.
6. Clean only with a dry, clean cloth. Do not handle with wet hands.
7. No user-serviceable components inside. Return to authorized service center for repairs.
8. Opening the device or modifying it will void the warranty.
9. Do not use the product near liquids or in places where it may be directly exposed to liquids. If the device comes into contact with any liquids, immediately disconnect it from the power source.
10. The warranty does not cover mechanical damage to the product.
11. If the device malfunctions, disconnect from the power source immediately and contact Endorfy technical support.
12. Do not discard electrical and electronic equipment together with other household waste.
13. The end user is responsible for correct disposal of unnecessary or faulty electrical equipment by returning it to the collection point or to the seller. Contact local authorities or the store where you purchased the product for additional information.
14. Make sure that the metal parts of the cooling system are not in contact with any expansion cards or components on the motherboard.

Safety instructions are also available in Czech, German, Danish, Spanish, Finnish, French, Hungarian, Italian, Norwegian, Polish, Romanian, Russian, Swedish, Slovak, and Ukrainian in the original document.