BESTÅ TV Bench Assembly Instructions
Product: BESTÅ TV Bench
Brand: IKEA
⚠️ Safety Warnings
WARNING!
Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.
Screw(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.
(Note: Warnings are provided in multiple languages throughout the document.)
Assembly Steps
Step 1: Attach Feet
Attach the adjustable feet to the bottom panels.
Use 6x part numbers 114947 / 115988.
Parts: 6x (114947 / 115988)
Diagram shows two base panels laid flat, with feet being screwed into pre-drilled holes on the underside.
Step 2: Join Base Panels
Connect the two base panels together using cam lock dowels and cam locks.
Use 12x part number 130618 (cam lock dowels) and 12x corresponding cam locks.
Parts: 12x (130618), 12x (cam locks)
Diagram shows the two base panels being joined, with cam lock dowels inserted into one panel and cam locks being tightened in the other.
Step 3: Attach Side Brackets
Attach the metal brackets to the side panels.
Use 2x part number 144342 and 2x part number 113287 (screws).
Parts: 2x (144342), 2x (113287)
Diagram shows the side panels being prepared, with brackets attached using screws.
Step 4: Insert Vertical Dividers
Slide the vertical divider panels into place.
Diagram shows the vertical panels being inserted into slots on the base panels.
Step 5: Secure Vertical Dividers
Secure the vertical dividers using cam locks.
Use 4x sets of cam lock hardware (part numbers: 118137, 122971, 141028, 130725, 119253).
Parts: 4x (cam lock sets)
Diagram shows cam locks being inserted and turned to secure the vertical dividers.
Step 6: Attach Side Panels
Attach the side panels to the base and vertical dividers.
Use 4x sets of cam lock hardware (part numbers: 130619, 130722, 141027, 130723, 130620).
Parts: 4x (cam lock sets)
Diagram shows the side panels being attached to the assembled base and dividers, secured with cam locks.
Step 7: Insert Internal Shelves
Slide the internal shelves into their designated positions.
Diagram shows shelves being placed into the unit.
Step 8: Secure Internal Shelves
Secure the internal shelves using cam locks.
Use 4x sets of cam lock hardware (part numbers: 118137, 122971, 141028, 130725, 119253).
Parts: 4x (cam lock sets)
Diagram shows cam locks being used to secure the shelves.
Step 9: Attach Back Panels
Slide the back panels into the grooves on the rear of the unit.
Diagram shows two back panels being slid into place from the top.
Step 10: Attach Top Panel
Place and secure the top panel onto the assembled unit.
Diagram shows the top panel being lowered and secured, likely with cam locks or screws.
Step 11: Attach Brackets/Runners
Attach the specified brackets or runners to the unit.
Use 4x part number 115444 and 4x part number 115443.
Parts: 4x (115444), 4x (115443)
Diagram shows these parts being attached to the inside of the unit.
Step 12: Attach Drawer/Door Hardware
Attach drawer slides or door hinges/runners.
Use 2x of the part sets including 144348, 144349, 144350.
Parts: 2x (144348, 144349, 144350)
Diagram shows these components being attached to the unit's interior.
Step 13: Attach Drawer/Door Guides
Attach guides for drawers or doors.
Use 1x part number 109049 (screws) and specific part numbers like 133203, 133204, 133205, 133207, 133206, 10093227.
Parts: 1x (109049), various other parts (e.g., 133203, 133204, 133205, 133207, 133206, 10093227)
Diagram shows screws and guides being attached to the unit.
Step 14: Attach Drawer/Door Slides
Attach the corresponding drawer slides or door hardware.
Use 1x part number 109049 (screws) and specific part numbers like 10093069, 144567, 144568, 144569, 144570, 144571.
Parts: 1x (109049), various other parts (e.g., 10093069, 144567, 144568, 144569, 144570, 144571)
Diagram shows screws and slides being attached.
Step 15: Cable Management
Route cables through the designated openings.
Diagram shows cables being fed through the back of the unit.
Step 16: Attach Drawer Fronts/Doors
Attach the drawer fronts or doors.
Use 1x of the part sets including 133209, 133210, 133212, 133211, 133208, 10093085.
Parts: 1x (133209, 133210, 133212, 133211, 133208, 10093085)
Diagram shows attachment of these components, possibly with a "Click!" sound effect indicated.
Steps 17 & 18: Adjust Feet
Adjust the feet for leveling the unit.
Use 4x part number 100006 (adjustment tool) for step 17, and 2x for step 18.
Parts: 4x (100006), 2x (100006)
Diagrams show the unit being leveled using the adjustable feet and a tool.
Step 19: Wall Attachment Preparation
Prepare for wall mounting by attaching brackets to the unit.
Use 3x part number 103693 (wall brackets) and associated screws.
Parts: 3x (103693), screws
Diagram shows the unit with wall brackets attached, and the brackets themselves with screw holes.
Wall Mounting Instructions
Crucially, the furniture MUST be secured to the wall to prevent tip-over.
Wall Mount Step 1: Mark Wall
Measure and mark the desired height and position for the wall brackets on the wall.
Diagram shows measurements (e.g., 44 mm, 600 mm, 513 mm) and the unit's position relative to the wall.
Wall Mount Step 2: Drill Holes
Drill holes in the wall at the marked positions. Use appropriate wall plugs (not included).
Diagram shows drilling into the wall, with a warning against using incorrect fixings (❌).
Use 3x screws and appropriate wall plugs (not included).
Wall Mount Step 3: Attach Wall Brackets
Attach the wall brackets to the wall using suitable screws and plugs.
Diagram shows the wall brackets being fixed to the wall.
Use 3x part number 103693.
Wall Mount Step 4: Attach Unit to Brackets
Lift the assembled unit and hook it onto the wall brackets.
Diagram shows the unit being lifted and engaged with the wall brackets, with a "Click!" indication.
Wall Mount Step 5: Final Securing
Ensure the unit is securely attached to the wall brackets.
Diagrams show final checks and securing mechanisms.
UPPLEVA Accessory Information
The document also references an accessory called UPPLEVA, which appears to be a TV mounting system. Instructions for UPPLEVA are shown in separate diagrams and refer to separate manuals (e.g., pages 11, 15, 24, 25, 27).
(Note: This section is for context; the primary focus is the BESTÅ unit assembly.)
