Audiophony WP-1 Wall Pilot User Manual

1 - Safety Information

Important Safety Information

This device is intended for indoor use only. Do not use it in wet or extremely cold/hot environments. Failure to follow these safety instructions may result in fire, electric shock, injury, or damage to this product or other property.

Any maintenance procedure must be performed by a CONTEST authorized technical service. Basic cleaning tasks must be performed carefully according to safety instructions.

This product contains non-isolated electrical components. Do not perform maintenance when the unit is powered on, as this may lead to electric shock.

Symbols Used

• This symbol indicates an important safety measure. [!]

• The WARNING symbol indicates a risk to the physical integrity of the user. The product may also be damaged. [⚠ WARNING]

• The CAUTION symbol indicates a risk of product damage. [⚠️ CAUTION]

WARNING: This unit contains no user-serviceable parts. Do not open the casing or attempt any servicing yourself. In the unlikely event that your unit requires service, please contact your nearest dealer.

To prevent electrical malfunctions, do not use power strips, extension cords, or connection systems without ensuring they are perfectly insulated and free from defects.

Sound Levels

Audiophony solutions deliver significant Sound Pressure Levels (SPL) that can be harmful to health with prolonged exposure. Do not stay near operating loudspeakers.

Recycling Your Device

As HITMUSIC is committed to the environment, only clean products that comply with ROHS are sold. When this product reaches the end of its life, take it to a collection point designated by local authorities. By collecting and recycling your product separately at the time of disposal, you will help conserve natural resources and ensure that it is recycled in a manner that protects public health and the environment.

Instructions and Recommendations

1. Read Carefully: It is strongly recommended to read and understand the safety instructions before using this device.
2. Keep this Manual: It is strongly recommended to keep this manual with the device for future reference.
3. Use this Product Carefully: It is strongly recommended to observe all safety instructions.
4. Follow the Instructions: Carefully follow all safety instructions to prevent personal injury or material damage.
5. Avoid Water and Wet Locations: Do not use this product in the rain or near sinks or other wet locations.
6. Installation: It is strongly recommended to use only a mounting system or support recommended by the manufacturer or supplied with this product. Follow the installation instructions carefully and use the correct tools. Always ensure that this device is securely fastened to prevent vibration and slippage during use, as this may lead to personal injury.
7. Ceiling or Wall Installation: Contact your local dealer before performing a ceiling or wall installation.
8. Ventilation: The cooling vents ensure safe use of this product and prevent any risk of overheating. Do not block or cover these vents, as this may lead to overheating and potential personal injury or product damage. This product should never be used in a closed, unventilated space such as a flight case or rack, unless cooling vents are provided.
9. Exposure to Heat: Continuous contact or proximity to hot surfaces may cause overheating and damage to the product. Keep this product away from heat sources such as heaters, amplifiers, cooktops, etc.
10. Electrical Power: This product can only be used with a very specific voltage. This information is on the label on the back of the product.
11. Protection of Power Cords: Power cords should be routed so that they are not walked on or pinched by items placed on or against them, with particular attention paid to cords at plugs, convenience outlets, and the point where they exit the fixture.
12. Cleaning Precautions: Unplug the product before cleaning. This product should only be cleaned with accessories recommended by the manufacturer. Use a damp cloth to clean the surface. Do not wash this product.
13. Periods of Non-use: Turn off the main power supply of the unit if you are not using it for extended periods.
14. Induction of Liquids or Objects: Do not allow any objects to enter this product, as this may lead to electric shock or fire. Never spill liquid on this product, as this may enter the electronic components and cause electric shock or fire.
15. This Product Requires Servicing When: Contact qualified service personnel if:
    • The power cord or plug is damaged.
    • Objects have fallen into the unit or liquid has been spilled.
    • The unit has been exposed to rain or water.
    • The product appears not to operate normally.
    • The product has been damaged.
16. Inspection/Maintenance: Do not attempt any inspections or maintenance yourself. Leave all servicing to qualified personnel.
17. Operating Environment: Ambient temperature and humidity: +5 - +35°C, relative humidity should be less than 85% (if vents are not blocked). Do not use this product in a non-ventilated, very humid, or hot place.

2 - Introduction

The WP-1 is clearly designed for professional installations and allows connecting an external player or microphone to a channel. Volume control is directly accessible on the controller, which is powered by the amplifier via RJ45 cables.

3 - Specifications

• 1 XLR microphone input (front)
• 1 RCA line input (front)
• 1 RJ45 output (rear)
• Front-mounted volume controls
• ON/OFF switch
• LED VU meter
• 15 V DC power supply via RJ45 cable from ZONEAMP4120 or PREZONE444
• Range between WP-1 and zone mixer: 200 meters with Category 6 cable.
• Frequency response: 20 Hz - 20 kHz
• T.H.D (1 kHz nominal power): < 0.1%
• Dimensions: 80 x 80 x 50 mm
• Weight: 0.2 kg

4 - Description and Connections

Connection Diagrams:

5 - Possible Setup

[Diagram illustrating various possible setups for the WP-1 Wall Pilot with ZONEAMP4120, microphones, CD players, and loudspeakers. The diagram shows connections for multiple zones and different numbers of 100V line-level speakers.]

The diagram shows:

• WP-1 for enabling and controlling zone 4 with a microphone.
• CD player connected to a WP-1.
• WP-1 for enabling and controlling zone 2 with a microphone.
• WP-1 for enabling and controlling zone 1 with a microphone.
• ZONEAMP4120 amplifier with multiple channels and speaker outputs.
• 100V line-level zones with 4, 3, 1, and 2 loudspeakers respectively.