SÅGMÄSTARE Cabinet

Important Safety Information

WARNING: Serious or fatal crushing injuries can occur from furniture tip-over. To prevent this furniture from tipping over, it must be permanently fixed to the wall with the included wall attachment devices.

Fastening devices for the wall are not included since different wall materials require different types of fastening devices. Use fastening devices suitable for the walls in your home. For advice on suitable fastening devices, contact your local specialized dealer.

Parts List

• 8x Dowel (Part 10130087)
• 8x Connector (Part 10078383)
• 4x Shelf support (Part 10124846)
• 2x Screw (Part 101065)
• 20x Screw (Part 112581)
• 8x Screw (Part 116654)
• 4x Screw (Part 10045513)
• 4x Screw (Part 10036516)
• 2x Cap (Part 10119192)
• 2x Cap (Part 10050150)
• 2x Bracket (Part 10121907)
• 2x Bracket (Part 114664)
• 2x Panel with rails (Part 10128454)
• 1x Base panel with legs attached (implied)
• 4x Legs
• 2x Side panels with decorative fronts
• 2x Shelves
• 1x Top panel
• 4x Door handles
• 4x Hinges
• Wall attachment bracket

Assembly Instructions

1. Gather all parts and tools. You will need a screwdriver and a spirit level [tool-icon].
2. Attach two long metal rails (2x) to the inside of the two large side panels.
3. Insert dowels into the pre-drilled holes on the side panels. Attach the decorative front panels to the side panels.
4. Connect the side panels to the base, ensuring dowels are inserted and securing with screws.
5. Place the two shelf panels onto the structure, aligning them with the pre-drilled holes.
6. Secure the shelf panels using eight screws (8x).
7. Attach the top panel to the main structure using two brackets (2x) and screws.
8. Carefully place the main cabinet body onto the four legs.
9. Attach the four legs to the base of the cabinet, screwing them into place.
10. Secure the legs firmly.
11. Place the top shelf structure onto the assembled cabinet body.
12. Secure the top shelf structure with four screws (4x).
13. Insert the shelf supports into the pre-drilled holes inside the cabinet.
14. Attach the door hinges to the two doors using four hinges and eight screws (8x).
15. Attach the corresponding hinge plates to the cabinet body using two hinge plates and four screws (4x).
16. Mount the doors onto the cabinet by connecting the hinges to the hinge plates.
17. Attach the four door handles to the doors.
18. Secure the door handles to the doors with two screws (2x) each.
19. Adjust the doors for proper alignment and closure.
20. Attach the door catches to the inside of the cabinet doors.
21. Attach the wall mounting bracket to the top rear of the cabinet.
22. Adjust the leveling feet on the bottom of the legs to ensure the cabinet is stable and level.
23. Position the cabinet against the wall where it will be placed. Mark the wall through the holes in the wall mounting bracket. Attach the wall mounting brackets to the wall using appropriate wall fasteners (not included). Ensure the fasteners are suitable for your wall type.
24. Secure the cabinet to the wall by attaching the wall mounting bracket to the wall brackets.