Statement Item
Thanks for choosing our MP3 Digital Product. To use this product correctly, please read this manual before usage. The contents of this User's Manual may vary by product.
Set up
- Insert FM transmitter into your vehicle's cigarette lighter or power port.
- Tune on your radio to the desired FM frequency, then match the same frequency on the player by using the buttons on the unit or on the remote control.
- Plug a USB Disk into this product; it will play and transmit MP3 files automatically.
- Plug an SD/MMC Memory Card into this product; it will play and transmit MP3 files automatically.
- This product supports MP3/MP4, CD, DVD players. Using the provided 3.5mm to 3.5mm Audio Cable, plug one jack into the transmitter and the other into the MP3/MP4, CD, or DVD player. It will play and transmit the songs from the connected device. All functions will now need to be controlled on the connected device, not the transmitter or its remote control. Enjoy!
Operation Guide
| Operation Guide | FM Transmitter | Remote Control |
|---|---|---|
| 1. How to play and stop | Press "PLAY" button: To Play the music Press "PLAY" button: To Pause the Music | Press the "Play" button. |
| 2. How to adjust the Volume | Press the "+" button: To Increase the Volume Press the "-" button: To Decrease the Volume | Press the "VOL+" button: Increase the Volume Press the "VOL-" button: Reduce the Volume |
| 3. How to change the frequency | Press the "B+" button: To Increase the frequency Press the "A-" button: To Decrease the frequency | Press the "CH+" button: Increase 0.1MHZ Press the "CH-" button: Reduce 0.1MHZ Or press the "CH" button then press the number of the frequency you desire. It will change automatically. |
| 4. How to choose music | Short press the "NEXT" button: To Play the next song Short press the "PREV" button: To Play the previous song | Press the "NEXT" Button: Play the next song Press the "PREV" Button: Play the previous song Or press the direct number of the song, it will change automatically. |
| 5. How to set EQ | Not Supported | Press the "EQ" button to switch EQ. |
