ASSEMBLY INSTRUCTION
INSTRUCTION D'ASSEMBLAGE
ITEM NO.: 6054BKS / 6054LGS / 6054RNS
CHAIR / CHAISE
Thank you for purchasing this product. Please take time to read and follow the instructions below. Check that you have all parts and hardware before assembly. Parts apparently missing are often found in the packing materials. If you do not have all the parts listed, please contact your dealer, and they will be sent to you immediately.
[!] It is recommended to install protective pads under all legs and supports to avoid damage or scratches when placing furniture on a wood floor or other hard surface. This also helps limit indentation and prevent discoloration if placing on carpet.
PARTS LISTS / LISTE DE PIECES
| NO. | SKETCH / Esquisser | DESCRIPTION | QTY / QTÉ |
|---|---|---|---|
| 1 | A simple line drawing of a chair with a curved back and four legs. | CHAIR / CHAISE | 1 PC |
Product Diagram
A line drawing of a chair. It features a curved, U-shaped backrest that extends down to the armrests. The seat is integrated into the frame. The chair has four straight legs, with the front legs extending from the sides of the seat frame and the back legs extending from the rear of the seat frame.
Care Instruction for Textured Furniture
- Avoid exposing furniture directly to sunlight or heating and air conditioning outlets.
- Sunlight and/or exposure to heating and air conditioning outlets will fade or damage Textured Fabric.
- Vacuum or wipe with a soft cloth to remove dust.
- Hardware may loosen over time. Periodically check to make sure all connections are tight. Re-tighten if necessary.
