Hall Tree Assembly Instructions
Warning: Please read this instruction manual carefully before using the product.
Caution: When tightening the screws, tighten sequentially. Do not tighten any screws fully and then towards the next one. When every part is OK, then tighten all the screws.
Product Overview & Components
This document provides detailed instructions for assembling the Hall Tree. Please identify all parts and hardware before beginning assembly.
Parts List
| Part No. | Description | Specification | Quantity |
|---|---|---|---|
| 1 | Shelf | 1 PC | |
| 2 | Top Panel | 1 PC | |
| 3 | Side Panel | 1 PC | |
| 4 | Side Panel | 1 PC | |
| 5 | Vertical Divider | 2 PCS | |
| 6 | Vertical Divider | 3 PCS | |
| 7 | Shelf Panel | 10 PCS | |
| 8 | Back Panel | 1 PC | |
| 9 | Back Panel | 1 PC | |
| 10 | Support Bar | 2 PCS | |
| 11 | Support Bar | 1 PC | |
| 12 | Support Bar | 1 PC | |
| 13 | Decorative Panel | 1 PC | |
| 14 | Decorative Panel | 1 PC | |
| 15 | Top Shelf | 1 PC | |
| 16 | Top Support | 1 PC | |
| 17 | Side Support | 1 PC | |
| 18 | Side Support | 1 PC | |
| 19 | Back Panel | 1 PC | |
| 20 | Hook Panel | 2 PCS | |
| 21 | Door Panel | 1 PC | |
| 22 | Door Panel | 1 PC | |
| 23 | Bottom Panel | 1 PC | |
| 24 | Bottom Panel | 1 PC | |
| 25 | Door Panel | 2 PCS | |
| 26 | Door Panel | 4 PCS | |
| 27 | Top Panel | 1 PC | |
| 28 | Hook | 12 PCS | |
| 29 | Light Belt | 1 PC |
Hardware List
| Label | Schematic | Specification | Quantity |
|---|---|---|---|
| A | Screw | M6x40 | 21 PCS |
| B | Cam Lock Bolt | (Used in steps) | |
| C | Screw | M4x18 | 2 PCS/4 PCS |
| D | Screw | M6x30 | 20 PCS |
| E | Screw | ST5x40 | 82 PCS |
| F | Screw | M3.5x12 | 54 PCS |
| G | Screw (small) | 2 PCS | |
| H | Screw (flat head) | $5 | 4 PCS |
| I | Screw (flat head) | 40 PCS | |
| J | Cam Lock | 3 PCS | |
| K | Screw (for hooks) | 22 PCS |
Assembly Notes
Cam Lock Fastening System: This system is used throughout the assembly process. Ensure correct usage to avoid damaging components.
Screw Tightening: Do not fully tighten screws during initial installation steps. Tighten sequentially. Once all parts are aligned, fully tighten all screws.
Plastic Granules: If wooden blocks lack plastic granules, use the spare ones provided in the screw bag. Align plastic pellets carefully with holes and gently tap them in.
Assembly Steps
STEP 1
Attach support bar (11) and top panel (2) using 3x Screw A (M6x40).
STEP 2
Attach vertical dividers (5, 6) to top panel (2) using 10x Screw E (ST5x40). Note hole orientation for parts 2 and 5.
STEP 3
Insert 2x Cam Lock Bolts (B) into top panel (2). Attach support bar (12) and secure with 2x Cam Locks (J).
STEP 4
Attach side panels (3, 4) using 4x Screw A (M6x40) and 4x Cam Lock Bolts (B) with 4x Cam Locks (J). Note hole orientation for parts 3, 4, 8, 9.
STEP 5
Attach support bar (11) to the assembly using Cam Lock Bolts (B) and Cam Locks (J).
STEP 6
Attach top panel (2) to side panels using 4x Screw E (ST5x40).
STEP 7
Flip assembly. Attach back panels (8, 9) using 4x Screw D (M6x30) and 4x Screw E (ST5x40).
STEP 8
Insert A (M6x40) screws into top panel. Attach top structure using F (M3.5x12) and G (small screws).
STEP 9
Attach back panel (19) using 2x Screw E (ST5x40). Note hole 19 orientation.
STEP 10
Attach back panel (19) using 14x Cam Lock Bolts (B) and 14x Cam Locks (J). Note component 19 orientation.
STEP 11
Assemble door panels: Attach 2x Door Panels (25) and 1x Bottom Panel (23) to Door Panel (21) using 4x Screw D (M6x30). Note hole orientation for 23.
STEP 12
Attach 2x Door Panels (26) and 1x Bottom Panel (23) to Door Panel (21) using 4x Screw E (ST5x40). Attach side support (17).
STEP 13
Assemble door panels: Attach 2x Door Panels (25) and 1x Bottom Panel (24) to Door Panel (22) using 4x Screw D (M6x30). Note hole orientation for 24.
STEP 14
Attach 2x Door Panels (26) and 1x Bottom Panel (24) to Door Panel (22) using 4x Screw E (ST5x40). Attach side support (18).
STEP 15
Attach door panels (26) to bottom panels (24) and side supports (18).
STEP 16
Connect main structure halves using back panel (19) and 8x Screw D (M6x30).
STEP 17
Attach lower section to main structure using 8x Screw E (ST5x40).
STEP 18
Attach upper section to main structure using 6x Screw E (ST5x40).
STEP 19
Attach top panel (27) using 4x Screw E (ST5x40). Attach top shelf (15) using 8x Screw E (ST5x40). Ensure hole 20 faces backward when installing component 20.
STEP 20
Attach support bars (10) to parts 1, 4, 3 using 28x Screw E (ST5x40).
STEP 21
Flip assembly. Attach door panels (26, 25) to door panels (21, 22) using 22x Screw F (M3.5x12) and 22x Screw K. Attach side supports (17, 18).
STEP 22
Attach hooks (28) using 24x Screw F (ST5x3.5x12).
STEP 23
Attach decorative panels (13, 14) to bottom section using 40x Screw I.
STEP 24
Install door plates: Connect H connectors to component 1 and 2. Press H connector end until door plate fits into component 2. Release H connector. Pay attention to iron sheet direction.
STEP 24 (Wall Mount)
Secure Hall Tree to wall using hardware 30A, 30B, 30C, 30D.
