Lounge Chair Assembly Instructions
Product Overview
This document provides assembly instructions for the Lounge chair. The chair is designed for relaxation and features a slatted seat and backrest, supported by curved metal frames. The backrest is adjustable to multiple positions.
Note: The 'x2' notation throughout this manual indicates that the entire assembly process is performed twice, likely for symmetrical components or to build two identical units.
Important Information & Safety
- ??? Not intended for use by children. Please keep your children closely supervised.
- ?? Keep away from fire or other heat sources.
- ?? Do not use harsh cleaner for cleaning!
- ? We recommend wearing protective gloves for assembly.
- ✅? Identify, sort and count the parts before assembly.
Please follow the instruction manuals and use a pad to avoid damage during assembly.
Thank you for your purchase! If you encounter any issues with parts, assembly, or are not satisfied, please contact customer support for assistance.
Tools and Hardware Required
Please prepare the following tools:
?
| Part ID | Quantity | Description |
|---|---|---|
| F | 24 | M6 x 15 mm Screw |
| G | 16 | M6 x 35 mm Screw |
| H | 40 | Flat Washer |
| I | 1 | Wrench |
When installing, please carefully confirm whether each screw corresponds to the manual; accessories with similar shapes can be distinguished by size.
Parts List
- A: Right Frame (2 pieces)
- B: Left Frame (2 pieces)
- C: Seat (2 pieces)
- D: Back (2 pieces)
- E: Support Bar (6 pieces)
Assembly Steps
Step 1
Hardware: G x 6 (M6 x 35 mm Screw), H x 6 (Flat Washer), I x 1 (Wrench)
Fix part C (Seat) with part A (Right Frame) and part B (Left Frame) using six M6x35mm Screws (G) and six Flat Washers (H). Use Wrench (I).
DO NOT FULLY TIGHTEN.
This step is performed twice [x2].
Diagram Description: Illustration shows part C being attached to parts A and B using screws (G) and washers (H). A magnified view shows the screw and washer assembly.
Step 2
Hardware: F x 12 (M6 x 15 mm Screw), H x 12 (Flat Washer), I x 1 (Wrench)
Fix part E (Support Bar) with part A (Right Frame) and part B (Left Frame) using twelve M6x15mm Screws (F) and twelve Flat Washers (H). Use Wrench (I).
DO NOT FULLY TIGHTEN.
This step is performed twice [x2].
Diagram Description: Illustration shows part E being attached to parts A and B using screws (F) and washers (H). A magnified view shows the screw and washer assembly.
Step 3
Hardware: G x 2 (M6 x 35 mm Screw), H x 2 (Flat Washer), I x 1 (Wrench)
Fix part D (Back) with part C (Seat) using two M6x35mm Screws (G) and two Flat Washers (H). Use Wrench (I).
DO NOT FULLY TIGHTEN.
This step is performed twice [x2].
Diagram Description: Illustration shows part D being attached to part C using screws (G) and washers (H). A magnified view shows the screw and washer assembly.
Step 4
Hardware: I x 1 (Wrench)
Adjust alignments and NOW TIGHTEN ALL SCREWS with Wrench (I).
This step is performed twice [x2].
Diagram Description: Illustration shows the fully assembled lounge chair.
Installation Completed
