ASSEMBLY INSTRUCTIONS
Item No. FB3042HAY-SC-4PK
Item No. FB3012CST-GY-T-3535
Item No. FB3012CST-WA-T-3535
Assembly Tips
- Remove hardware from box and sort by size.
- Please check to see that all hardware and parts are present prior to start of assembly.
- Please follow attached instructions in the same sequence as numbered to assure fast & easy assembly.
Chair Assembly (Item No. FB3042HAY-SC-4PK)
Part List
| NO. | PART NAME | Q'ty |
|---|---|---|
| #1 | Back frame with cushion | 1pc x4 |
| #2 | Seat frame with cushion | 1pc x4 |
| #3 | Front Legs | 2pcs x4 |
Hardware List
| NO. | PART NAME | Q'ty |
|---|---|---|
| #A | Bolt Ø1/4" x 3" | 4pcs x4 |
| #B | Bolt Ø1/4" x 2-3/8" | 4pcs x4 |
| #C | Bolt Ø1/4" x 1-1/2" | 2pcs x4 |
| #D | Spring washer Ø1/4" | 10pcs x4 |
| #E | Flat washer Ø1/4" | 10pcs x4 |
| #F | Allen key M4 | 1pc x4 |
Assembly Steps
STEP 1:
Attach the seat frame (#2) to the back frame (#1). Use bolts (#C), spring washers (#D), and flat washers (#E). Tighten with Allen key (#F).
Diagram shows seat frame connecting to back frame with hardware.
STEP 2:
Attach the front legs (#3) to the seat frame (#2). Use bolts (#A), spring washers (#D), and flat washers (#E). Tighten with Allen key (#F).
Diagram shows front legs connecting to seat frame with hardware.
Note: Do not tighten screws until completely assembled.
STEP 3:
Attach the back frame (#1) to the seat frame (#2). Use bolts (#B), spring washers (#D), and flat washers (#E). Tighten with Allen key (#F).
Diagram shows back frame connecting to seat frame with hardware.
STEP 4:
A completed chair is shown.
Note: Tighten all screws until completely assembled.
Table Assembly (Item Nos. FB3012CST-GY-T-3535, FB3012CST-WA-T-3535)
Exploded View
The table is shown with parts labeled: 1 for the table top and 2 for the legs.
Diagram shows an exploded view of the table.
Parts List
| NO. | PART NAME | Q'ty |
|---|---|---|
| 1 | TABLE TOP | 1PC |
| 2 | LEG | 4PCS |
Hardware List
| NO. | PART NAME | Q'ty |
|---|---|---|
| A | BOLT / BOULON Ø5/16" x 2-3/8" | 8PCS |
| B | LOCK WASHER Ø5/16" 1/16 | 8PCS |
| C | FLAT WASHER Ø5/16" x 19mm | 8PCS |
| D | ALLEN KEY 1/6" x 2-1/4" | 1PC |
Assembly Steps
STEP 1:
Attach the legs (2) to the underside of the table top (1). For each leg, use bolts (A), lock washers (B), and flat washers (C). Tighten with the Allen key (D). This step is repeated 4 times for all legs.
Diagram shows legs being attached to the table top with hardware.
COMPLETED:
A completed table is shown.
Diagram shows the fully assembled table.
