FIAMMA LED Lighting Kit Installation and Usage Guide

Model: LED STEP (98655-886)

Product Overview

This document provides installation and usage instructions for the FIAMMA LED lighting kit, specifically the "LED STEP" model (98655-886). The kit is designed for illuminating recreational vehicles ?.

The product is powered by 12Vdc, consumes 1.7W (0.14A), has an IP54 rating, and a CRI > 86. It offers a 120° beam angle, 145 Lumens ?, a color temperature of 6500K, and a lifespan of 25000 hours.

Instructions are available in multiple languages, with English as the primary language for this document.

Package Contents

The package typically includes:

Component A (1x)
Component B (1x)
Component C (4x)
Component D1 (1x)
Component D2 (1x)

Diagram on page 2 shows these components and their quantities. Dimensions include 4.7 cm height, 1.6 cm height, and a length range from a minimum of 23 cm to a maximum of 50 cm. It also displays technical specifications and certifications like UKCA, CE, and A+.

Installation Instructions

General Precautions:

Check all parts for damage or deformation during transport.
If you have doubts or questions, contact your dealer.
Installation should be performed by qualified personnel in compliance with local regulations.

Installation Steps:

Step 1: Prepare component A, ensuring it meets the minimum length requirement of 23 cm.
Step 2: Attach components D1 and D2.
Step 3: Attach component B (1x).
Step 4: Position component C (4x) with spacing of 5 mm and 10 mm.
Step 5: Connect the LED strip to a 12V power source.
Step 6A: Drill mounting holes (3x Ø4 mm) for component A.
Step 6B: Apply silicone and secure component A.

Diagrams on pages 3 and 4 illustrate these steps, showing the arrangement of components and specific actions like drilling and applying sealant.

Safety Instructions

Important Warnings: ⚠️

Failure to follow these instructions may cause severe harm or damage.
The product is designed exclusively for recreational vehicles ? and is not suitable for home environments.
For safety, always disconnect the negative terminal from the vehicle battery before installation. Work without power.
Connect the power cable to the fuse box or terminal board, not directly to the battery.
Use the correct fuse rating as per EN 1648-1 and EN 1648-2. An oversized fuse can cause overheating, short circuits, or malfunctions.
Choose the safest and shortest route for the power cable. Reduce cable length if necessary.
Use appropriate cable clamps for terminal board connections. Incorrect terminals can cause voltage drop and heat.
It is strictly forbidden to drive with the LED lights on. Ensure the power supply is inhibited when the vehicle is running.
Avoid prolonged viewing of the LED strip at close proximity.

Manufacturer Liability: The manufacturer is not responsible for damages resulting from:

Defective installation or connection.
Damage caused by mechanical influences or overvoltage.
Unauthorized alterations to the device.

Warranty Information

FIAMMA provides a warranty for defects in materials and manufacturing. The customer is entitled to warranty claims in accordance with the local laws and regulations of the country where the product was purchased.

EU Declaration of Conformity

Fiamma S.p.A. declares that this product conforms to relevant Union harmonization legislation, including:

2014/30/EU Electro Magnetic Compatibility Directive (EMCD).
2014/35/EU Low Voltage Directive (LVD).
2011/65/EU Restriction of the use of certain hazardous substances Directive (RoHS Directive).
2012/1194EU Implementing Directive regarding ecodesign requirements for directional lamps, light emitting diode lamps and related equipment.
2012/874/EU Supplementing Directive regarding energy labelling of electrical lamps and luminaires.
EN 60529 (1991) + A1 (2000) for IP code (IP grade 44).
IEC 62471:2006 Photobiological safety of lamps and lamp systems.

The following harmonised standards and/or technical specifications have been applied.

Company Details:

Fiamma S.p.A.
Via San Rocco, 56
Cardano al Campo - (Varese)
Italy
Telephone: 0331/709111
Email: fiamma@fiamma.it

Product Models Declared:

98655-850: Rafter Led
98655-902: Rafter Led Caravanstore
98655-914: Led Awning Case
98655-915: Kit Led Awning Case 50
98655-848: Led Awning Light
98655-883: Led Garage Light
98655A884: Led Sensor Door Light
98655-607: Led Awning Light Gutter
98655-849: Awning Arms Led
98655-886: Led Step
98655-471: Kit Awning Led
986557040: Kit Led Strip Awning
986557051: Kit Led Strip Awning High Brightness
98655-885: Led Warning Solar
98655Z098: Kit Led F65 Eagle
98655Z099: Kit Led F45 Eagle
986557134: Rafter Led F40

	Fiamma Rafter LED Installation Guide and Product Information Comprehensive installation guide and product details for the Fiamma Rafter LED lighting system, designed for recreational vehicles. Includes safety, warranty, and technical specifications.
	Fiamma Rafter LED Lighting Kit Installation and Usage Guide Comprehensive guide for installing and using the Fiamma Rafter LED lighting kit for recreational vehicles. Includes safety instructions, parts list, and warranty information.
	Fiamma LMC-TEC Adapter Installation Guide for F65/F80 Awnings Comprehensive installation instructions for the Fiamma LMC-TEC adapter, designed for F65 and F80 awnings. Includes parts list, step-by-step assembly, safety precautions, and warranty information.
	Fiamma Privacy Room F45 Installation and Usage Guide Comprehensive instructions for installing and using the Fiamma Privacy Room F45 awning enclosure, including parts list, assembly steps, maintenance, and warranty information.
	Fiamma F45i Awning Spare Parts Diagram and Codes Comprehensive spare parts list and diagram for the Fiamma F45i awning, detailing component numbers, color options, and length variants for easy identification and ordering.
	Fiamma Side W Pro & Side W Pro Shade Installation and Usage Guide This guide provides detailed installation, usage, and maintenance instructions for Fiamma's Side W Pro and Side W Pro Shade awning accessories, designed to enhance outdoor living spaces.
	Fiamma Kit Side Tristor Installation Instructions & Warranty Official installation guide and warranty information for the Fiamma Kit Side Tristor (model 98655-079), designed for RV and caravan awnings. Includes parts list and step-by-step assembly.
	Fiamma F45 & F43van Awning Installation Kit for Mercedes Vito Comprehensive installation guide for Fiamma F45 and F43van awning kits, specifically designed for Mercedes Vito vehicles. This document details package contents, step-by-step assembly, safety precautions, and warranty information.