IKEA IVAR Cabinet with Sliding Doors

Safety Information

WARNING! Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.

Screws(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.

עברית

אזהרה! נפילת הרהיט עלולה לגרום לפגיעה גופנית חמורה או קטלנית. על מנת למנוע את נפילת הרהיט, יש לקבע אותו לקיר באמצעות אבזרי הקיבוע הכלולים באריזה.

הברגים לקיבוע אינם כלולים מכיוון שיש להתאים אותם לחומר ממנו עשוי הקיר המיועד. לקבלת מידע נוסף על הברגים המתאימים לקיבוע, אנא פנו לאיש מקצוע. קראו ופעלו לפי ההוראות המפורטות בזהירות.

Parts List

The following components are included in the package:

• 8x Dowel (101350)
• 6x Screw (109560)
• 2x Screw (108458)
• 4x Screw (109535)
• 4x Screw (100400)
• 8x Pin (101532)
• 10x Pin (101827)
• 1x Allen Key (100049)
• 1x Bracket (100001)
• 6x Bracket (10095544)
• 2x Bracket (102646)
• 2x Connecting Plate (101827)
• 4x Drawer Slide Mechanism (194963)
• 4x Drawer Slide Mechanism (194964)
• 16x Screw (101532)

Assembly Steps

1. Step 1: Attach dowels to the side panels. Insert 8 dowels (101350) into the designated holes on the two main panels.
2. Step 2: Assemble the frame. Connect the side panels to the base and top panels using the provided screws and brackets. Ensure the grooves for the back panel are aligned.
3. Step 3: Attach the drawer slides to the side panels. Use 4x screws (100214) for each slide mechanism (100001).
4. Step 4: Insert the back panel into the grooves. Slide the back panel into place.
5. Step 5: Attach the drawer front panel. Slide the drawer front panel into the assembled frame.
6. Step 6: Secure the drawer. Use 4x screws (100214) and 4x screws (100001) to secure the drawer mechanism.
7. Step 7: Assemble the shelves. Attach the shelf supports to the side panels using screws.
8. Step 8: Install the shelves. Place the shelves onto the supports.
9. Step 9: Mount the cabinet to the wall. Use the provided wall attachment devices. Ensure you use screws and plugs suitable for your wall type. Follow the instructions carefully for secure mounting.
10. Step 10: Insert the sliding doors. Slide the doors into the top and bottom tracks.
11. Step 11: Adjust the doors. Use the adjustment screws on the door hinges to ensure proper alignment and smooth operation.
12. Step 12: Secure the doors. Lock the doors in place using the provided locking mechanisms.
13. Step 13: Final check. Ensure all parts are securely fastened and the cabinet is stable.

Wall Mounting Instructions

To prevent tip-over accidents, it is crucial to securely attach the cabinet to the wall using the provided wall attachment devices. The type of screws and wall plugs required will depend on the material of your wall. If you are unsure, please consult a professional for advice on the appropriate fasteners for your specific wall type.

The assembly diagrams illustrate how to attach the cabinet to the wall using brackets and screws. Ensure that the wall attachment points are properly aligned with wall studs or use appropriate wall anchors for stability.