IKEA IVAR Cabinet with Sliding Doors

Important Safety Information

Warning: Tip-Over Hazard

⚠ Serious or fatal crushing injuries can occur from furniture tip-over. To prevent tip-over, this furniture must be used with the wall attachment device(s) provided.

Note: Screws and plugs for the wall are not included. Use screws and plugs suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instructions carefully.

Parts Included

• 8x Dowel (100001)
• 2x Screw (101350)
• 6x Screw (101827)
• 4x Screw (100404)
• 4x Screw (101532)
• 8x Dowel (109560)
• 2x Bracket (103887)
• 2x Bracket (194963)
• 1x Bracket (194964)
• 2x Bracket (194965)
• 4x Cam Lock (100214)
• 1x Handle (100049)
• 16x Screw (109548)

Assembly Instructions

Step 1: Assemble Side Panels

Lay the side panels flat on a protected surface. Insert 12x screws (101350) to connect the panels as shown. [Diagram shows two side panels being joined with screws.]

Step 2: Attach Back Panel Supports

Insert 2x cam lock housings (100214) into the designated holes on the side panels. Insert 3x dowels (100211) into the back panel. Attach the back panel using 4x screws (109548). [Diagram shows cam locks, dowels, and screws being used to attach the back panel.]

Step 3: Attach Top Panel Supports

Insert 3x cam locks (100214) into the top panel. Insert 1x dowel (100001) into the top panel. [Diagram shows cam locks and a dowel being inserted into the top panel.]

Step 4: Attach Bottom Panel

Attach the bottom panel using 1x screw (100211). [Diagram shows the bottom panel being attached.]

Step 5: Attach Top Panel

Place the top panel onto the assembled unit. Secure it using 3x cam locks (100214) and 1x dowel (100001). [Diagram shows the top panel being placed and secured.]

Step 6: Secure Top Panel

Secure the top panel further using 1x screw (100211). [Diagram shows additional screws securing the top panel.]

Step 7: Insert Back Panel

Slide the back panel into the grooves of the side panels. [Diagram shows the back panel sliding into place.]

Step 8: Prepare for Top Panel

Insert 2x dowels (101350) into the top panel. [Diagram shows dowels being inserted into the top panel.]

Step 9: Place Top Panel

Place the top panel onto the unit. [Diagram shows the top panel being positioned.]

Step 10: Secure Top Panel

Insert 5x cam locks (100214) and 1x dowel (100001) into the top panel to secure it. [Diagram shows cam locks and dowels securing the top panel.]

Step 11: Final Top Panel Attachment

Secure the top panel with 2x screws (109548). [Diagram shows final screws attaching the top panel.]

Step 12: Attach Sliding Door Runners (Top)

Attach 4x brackets (194964) to the top panel. Attach 8x screws (194965) to the side panels. [Diagram shows brackets and screws for the door runners.]

Step 13: Attach Sliding Door Runners (Bottom)

Attach 4x brackets (194963) to the bottom panel. Attach 8x screws (194965) to the side panels. [Diagram shows brackets and screws for the door runners.]

Step 14: Wall Attachment Preparation

Attach the wall bracket (109535) to the unit using 2x screws (109535). [Diagram shows a wall bracket being attached to the unit.]

Step 15: Wall Attachment

Attach the unit to the wall using 2x screws (101827) and 2x screws (101532). Ensure appropriate wall fixings are used. [Diagram shows the cabinet being attached to a wall.]

Step 16: Wall Mounting Bracket

Attach the wall bracket (102646) to the unit using 2x screws (108458). [Diagram shows another type of wall bracket being attached.]

Step 17: Attach Wall Brackets

Attach 4x brackets (103887) to the unit. [Diagram shows brackets being attached to the unit.]

Step 18: Prepare for Doors

Insert 4x dowels (109560) into the unit. [Diagram shows dowels being inserted.]

Step 19: Attach Sliding Doors

Insert the sliding doors into the runners. Secure the doors using 2x brackets (109560) and 2x screws (100404). [Diagram shows doors being inserted and secured.]

Step 20: Secure Unit to Wall

Secure the unit to the wall using 8x screws (101532). [Diagram shows the unit being fixed to the wall.]

Step 21: Final Placement

Position the assembled unit as desired. [Diagram shows the cabinet in its final position.]

Step 22: Attach Doors

Attach the sliding doors to the unit. [Diagram shows doors being attached.]

Step 23: Secure Doors

Secure the doors in place. [Diagram shows doors being secured.]

Step 24: Adjust Doors

Adjust the doors for proper alignment and function. [Diagram shows door adjustment.]